Installation Error during make

[kitware]

Installation Error during make

[dstoup]

Hi, can you please provide all of the following.

-Your OS/distribution including version
-Your CMake version
-Your configuration of fletch, which packages and options did you select which deviate from the default.
-The full log of your build, preferably just the log you get once you rerun the build after the failure. That will allow us to see the full complaint of the failing package.

It looks to me like there is an issue with your system libjbig. Also, please confirm, are you running make or make install?

[dstoup]

Also, please provide the gcc version you're using.

[ankitshah009]

OS distribution - Ubuntu 17.04
CMake version - 3.9.1
Fletch configuration - using steps mentioned in the readme to clone fletch. - Thus options are default.
gcc version - 7.2.0 - Ubuntu 7.2.0-8ubuntu3

Running command make sees this error.

[ankitshah009]

Log file to trace the error.

log_failure.txt

[ankitshah009]

Any updates on how to fix the issue?
Or which is the configuration on which the fletch build is known to work as it will help me create a similar virtual environment.

[dstoup]

Sorry for the delay. No, I am having difficulty seeing the actual error using the log you provided. Please follow the step below exactly and provide a new log file. 1. Start with a new build directory 2. Configure your build with CMake and tell me exactly which configuration settings you change. 3. run `make -j4 -k` ... you can change the 4 to something reflective of how may cores you want to use. The -k is critical as well. 4. Once the build fails run `make &> log_failure.txt` and provide that log. The difference between what I've been requesting and what you've posted is; your log contains everything and it's way too hard to decipher when dealing with so many packages. Running make -j4 -k will first build as much of the packages as you can possibly build and discard all of that excess messaging which is just noise. After that, running a single core make should show nothing at all but the complete failure. That will tell me which package is failing and hopefully why. You can skip starting with a new build directory, etc provided you can type make and see nothing but the log for the failing package. Thank you, Dave

…

On Tue, Dec 12, 2017 at 2:59 PM, Ankit Shah ***@***.***> wrote: Any updates on how to fix the issue? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#277 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AFRAWk_JqwdkY_nZlvbxijrVN8zedY_fks5s_tsigaJpZM4Q1oAd> .

-- David Stoup Staff R&D Engineer Kitware, Inc. 28 Corporate Drive Clifton Park, NY. 12065 518-881-4949 (W) 518-312-3946 (M) 518-371-4573 (F)

[Cookt2]

which is the configuration on which the fletch build is known to work as it will help me create a similar virtual environment.

There are dashboards that are running GCC versions 4.8/5.5/6.4/7.3, with CMake 3.1+ , on Ubuntu 14/16/18, and with default Fletch configurations.

This issue appears to be obsolete. If error persists feel free to open a new issue. Closing...