Comments (7)
Hello @messy117 and @DivingDuck ,
I remember this bug, I had it myself a while back. This is a duplicate of #1328, which we were able to fix with PR #1331. Unfortunately, this fix has not yet been packaged and released.
If you like, you can try to fix your broken config file. Open the file (backup first) in any text editor and look for entries that start with button .... The number after 'button' must go from 0 to however many buttons you have, with no missing number between the numbers. The order of the numbers doesn't matter. Can be (0, 1, 2, 3, ...) or (2, 1, 3, 0, ...), but cannot be (0, 1, 4, 3) because 2 would be missing.
from printrun.
Unfortunately, this fix has not yet been packaged and released.
Maybe it is time for a 2.1.0 release? ;)
super newb here, do i just copy and paste that commit coding into my pronterface.py?
I assume you use Windows but unsure how exactly you run Printrun. Easiest thing I think would be to try running one of the nightly Windows builds.
from printrun.
@messy117,
No. Please do what I had ask for and answer the question I wrote in my reply. I will then look into it and correct your config file (if that is the problem). But first I want to see what had happen on your installation.
@neofelis2X,
Thanks for reminding this issue. You are correct. Unfortunately we still do not know what operating system @messy117 have. I did the test with version 2.0.1 as well and I can't move a custom button out of range either for left or right side because they are deactivated as soon the hit the last or first position. This is why I ask for the files.
I had as well this bug long time ago with the very first versions of 2.00RCx. I still think that this sometimes still happen as well when a user switch between 1.x and 2.x versions. But I'm not sure. I hoped with the requested data and information becoming a better idea of this problem especially as long the data are not compromised from any kind of repair attempts. There were one or two similar problems in the past where we unfortunately did not get an answer back when we ask for it.
@rockstorm101,
Good idea. Yes we should make a new release soon. Please wait until I build a new set of translation files. I had planed to do it this week end and then ask you for a new release :)
from printrun.
Maybe it is time for a 2.1.0 release? ;)
Yes, absolutely. I won't be able to contribute to the interface for a while, because I am occupied with other things. But whats already merged should be released. :)
from printrun.
Hi @messy117,
I can't replicate this error. Moving a custom button to the left or right is deactivated as soon you are on the last possible position. But it is obviously that you was able to screw up something in Pronterface. My first guess is a malformed file called printrunconf.ini. You can make a backup of this file and then delete it. Pronterface should then start again but w/o any setup/customization you did before.
Please provide us with some more information:
- Operating System
- Pronterface version
- Please attach the following files (make a zip file of all before attaching)
The location for a Windows system is:
c:\Users\YOUR_USER_NAME\printrunconf.ini
c:\Users\YOUR_USER_NAME\Printrun.log
and if available the complete folder
c:\Users\YOUR_USER_NAME\AppData\Local\Printrun\
This can help us to find out what happen wrong with your configuration. Thanks.
from printrun.
super newb here, do i just copy and paste that commit coding into my pronterface.py?
from printrun.
Please wait until I build a new set of translation files.
Understood. Take your time. No reason to rush
from printrun.
Related Issues (20)
- Unstable behavior if there's no controlling terminal HOT 4
- 3D view broken in own-compiled package, Debian repo version is good -- part deux! HOT 12
- Text fields and buttons lack padding around their contents, and other minor UI issues HOT 1
- UI hangs after some time, print continues HOT 2
- ValueError: could not convert string to float: line 1995 pronterface.py HOT 46
- Pronterface - Errno 6 Device not configured HOT 5
- My Laser uses the RS 232C communication protocol and not G-Code HOT 10
- Thank you for making pronterface printrun and allowing me to connect the laptop to the 3D printer HOT 2
- Running Pronterface on Aarch64 and Trying Other Tools in the Suite HOT 6
- filament reload error HOT 2
- feeding gcode through a pipe HOT 4
- Cannot download on MAC HOT 8
- Pause from G-Code HOT 3
- Is there a Pause Flag on RPC server? HOT 7
- Plater shortcuts not working and missing tips
- printrun HOT 1
- AttributeError: 'NoneType' object has no attribute 'write HOT 3
- Do not disable extruder on exit HOT 8
- Multiple printer config files HOT 9
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from printrun.