Comments (13)
If this device doesn't support kelvin levels, home assistant shouldn't show the color temperature slider, right?
from zigbee-herdsman-converters.
It seems home-assistant still has the old values from mqtt auto discovery. I originally tested it by copying the Hue Go part. Can I just delete the line from the database and re-pair?
from zigbee-herdsman-converters.
Ok, I have figured it out.
To support my Philips Hue bloom the following is needed:
zigbee-shepherd-converters/devices.js: devices
{
zigbeeModel: ['LLC012'],
model: '7299760PH',
vendor: 'Philips',
description: 'Hue Bloom',
supports: generic.light_onoff_brightness_colorxy().supports,
fromZigbee: generic.light_onoff_brightness_colorxy().fromZigbee,
toZigbee: generic.light_onoff_brightness_colorxy().toZigbee,
},
zigbee2mqtt/lib/homeassistant.js: mapping
'7299760PH': [configurations.light_brightness_xy],
from zigbee-herdsman-converters.
Would you mind creating a PR?
from zigbee-herdsman-converters.
Merged, thanks!
from zigbee-herdsman-converters.
jo, does the bloom require a differemt pairing procedure? the 10s reset with dimmer doesnt do it for me.
from zigbee-herdsman-converters.
@aep Should work like other Hue products. Have you tried disconnecting and reconnecting the power and then pair? Also seems like the range for pairing is much smaller than for example the bulbs. Good luck!
from zigbee-herdsman-converters.
yeah, also tried touchlink by putting cc stick, bridge and bloom near to each other and then using the hue touchlink api.
It pairs fine with the hue, but not with cc. I suspect it wont join an HA network anymore after its been in an LL network. Did you previously pair yours with the hue bridge?
from zigbee-herdsman-converters.
Mine was previously paired with the hue bridge. My hue bridge was disconnected when pairing things with zigbee2mqtt however. But you probably tried that already.
from zigbee-herdsman-converters.
yeah. but you gave me an idea so i went and depowered every hue device in my home
unfortunately no dice either.
just to confirm, what worked for you was:
- depower hue bridge
- 10s on+scene 1 on the round dimmer thing until the bloom blinks and then becomes red
- power cycle the bloom
- permit_join: true and then just wait
from zigbee-herdsman-converters.
This worked for me:
- Depower bridge
- Disconnect Bloom power
- Reconnect Bloom power
- 10s on 1 and 0 on this remote https://www2.meethue.com/en-us/p/hue-dimmer-switch/046677458140
- After around 10s bloom changes color, keep a few second longer pressed and then it should connect.
from zigbee-herdsman-converters.
thanks for your help, i think i need to give up.
even got the same remote as you.
mine blinks, then goes red and stays that way, not joining. It's a pretty old device so maybe back then they didnt allow HA.
from zigbee-herdsman-converters.
Hello, anything new on this of how to connect the bloom to zigbee? thanks.
from zigbee-herdsman-converters.
Related Issues (20)
- Aqara ZNJLBL01LM (lumi.curtain.acn002) problem after latest dev updates HOT 4
- F00YK04-18-1 problem after latest dev updates
- Add Tongou TOWSMR1 _TZE204_kobbcyum HOT 2
- Supported Device has no input cluster genAnalogInput at getEndpointsWithCluster
- Blitzwolf BSHP13 "No converter available for" HOT 1
- NodOn SIN-4-RS-20 - Add value `8` to `windowCoveringMode` HOT 1
- Vesternet VES-ZB-REM-013 multiple commands for on and off action HOT 1
- Incorrect attribute "occupancy" for iHORN LH03121 door contact sensor HOT 1
- Sonoff TRVZB attributes are not marked with device_category as configuration entities HOT 5
- New device template for SODA Circle S8 window handle `_TZE200_j7sgd8po` HOT 16
- The compiled zcl folder is missing. HOT 1
- Sonoff TRVZB exposes battery_low but never updates it HOT 2
- tuya ZG-204ZM setting motion detection mode fails (pull request #7553) HOT 6
- converter for Homr Multisensor
- Please add support for frient SIRZB-111
- Müller Tint GU10 blub is missing light entity HOT 1
- Fix /device/qa.ts definitions not loading HOT 1
- Add support for TS0601 _TZE200_d0yu2xgi LTECH CCT SE-20-250-1000-W2Z2 HOT 1
- Ubisys C4 - Commands not correctly sent to coordinator
- RTCGQ11LM is missing several values HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from zigbee-herdsman-converters.