[GeoMechanicsApplication][Thermal] Write the results of the initial stage to the output file

[mnabideltares]

[GeoMechanicsApplication][Thermal] Write the results of the initial stage to the output file

[mnabideltares]

@mcgicjn2

It is possible to do it by multistage. At the first stage the parameter and material inputs need to be modified:

ProjectParameters.json

"problem_data": {
    "start_time":           -600.0,
    "end_time":             0,
    ...

"time_stepping":              {
    "time_step":                 600,
    "max_delta_time_factor":       1
    ...

MaterialParameters.json

"Variables": {
    ...
    "SPECIFIC_HEAT_CAPACITY_SOLID"  :  0.0,
    "SPECIFIC_HEAT_CAPACITY_WATER"  :  0.0,
    "THERMAL_CONDUCTIVITY_SOLID_XX" :  0.0,
    "THERMAL_CONDUCTIVITY_SOLID_YY" :  0.0,
    "THERMAL_CONDUCTIVITY_SOLID_XY" :  0.0,
    "THERMAL_CONDUCTIVITY_WATER"    :  0.0
    ...

For reference, attached 2 cases which are taken from the integration tests.

test_thermal_fixed_temperature_2D3N.zip
test_thermal_heat_flux_2D3N.zip

[rfaasse]

Workaround was presented to relevant stakeholder, since this is not an official workflow, we don't need to add a test to our suite, so closing this issue.

FYI @mcgicjn2