Comments (16)
Good, this will be available in the next 5.0.3 patch that should be published in few days.
We're just waiting for Trimble validation to publish it.
from lairdubois-opencutlist-sketchup-extension.
This feature only changes the parts list title like in this screenshot here
This feature only displays the "active path" (current editing element), not the selected instance name.
The active path is where you are currently editing in the model tree. Double click on a group in your model to set it as active path.
from lairdubois-opencutlist-sketchup-extension.
Ahhh! OK, this was the Trick.. Thanks. Working 👍
from lairdubois-opencutlist-sketchup-extension.
It the header, you can see :
- The model name
- The model description
- The Scene name
- The Scene description
![Capture d’écran 2023-08-26 à 20 35 24](https://private-user-images.githubusercontent.com/156056/263492104-b582a5f1-4de5-475f-a26e-e7948d0402ec.png?jwt=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmF3LmdpdGh1YnVzZXJjb250ZW50LmNvbSIsImtleSI6ImtleTUiLCJleHAiOjE3MjE0NjU1MjEsIm5iZiI6MTcyMTQ2NTIyMSwicGF0aCI6Ii8xNTYwNTYvMjYzNDkyMTA0LWI1ODJhNWYxLTRkZTUtNDc1Zi1hMjZlLWU3OTQ4ZDA0MDJlYy5wbmc_WC1BbXotQWxnb3JpdGhtPUFXUzQtSE1BQy1TSEEyNTYmWC1BbXotQ3JlZGVudGlhbD1BS0lBVkNPRFlMU0E1M1BRSzRaQSUyRjIwMjQwNzIwJTJGdXMtZWFzdC0xJTJGczMlMkZhd3M0X3JlcXVlc3QmWC1BbXotRGF0ZT0yMDI0MDcyMFQwODQ3MDFaJlgtQW16LUV4cGlyZXM9MzAwJlgtQW16LVNpZ25hdHVyZT03NDgzYzYzZjllMmE1ZDRkNjgzNTZmM2NkNjc4NzUwOThkNjE1ZTBiMmQ5MmQzYjIyNmVmN2I2MmVmYWFiZDhhJlgtQW16LVNpZ25lZEhlYWRlcnM9aG9zdCZhY3Rvcl9pZD0wJmtleV9pZD0wJnJlcG9faWQ9MCJ9.oHwTApgkmqmZrGZKSZs-7Vm-ugCcek15x1WWT-fz5W4)
The best solution for you is certain to use named scenes.
from lairdubois-opencutlist-sketchup-extension.
Thanks for you suggestions, but maybe we talking not about the same. I try to explain more:
Here you can see the whole Plattform.
I highlighted some of the mentioned Assambly´s. Overall 29 different Parts.
All together are building the Plattform when screwed together.
And each of the individuall Parts/Assambly´s are made out of the mentioned different Materials (like tubed steel, flat steel, a.s.o)
If I understand you correctly, then I see your suggestion as unnecessarily complex to create 29 scenes and to name them again as I named the components before. That doesn't make any sense to me
Each Assembly already have Definition-Names because they are also (nested) components.
Reason: Some of them a mirrored and have to change together if a change is needed.
The Name of the Sketchup-File is shown in the header of OCL. That´s good and OK if i generate a "main Part list" without selecting anything in SU.
But not good, if i only generate a Partlist for one part:
Also no possibilitys to determine the part in the printed PDF
from lairdubois-opencutlist-sketchup-extension.
I would like to add/improve my statement:
It's not that it's because I have to name them. It's more that I have to create the components anyway. Therefore, this is not only optional, but actually double the work to create the scenes as well.
from lairdubois-opencutlist-sketchup-extension.
The component all the platform or only the blue selected entities on you first screenshot ?
Maybe the title could integrate the current editing path or selected "group" if only one is selected.
from lairdubois-opencutlist-sketchup-extension.
Actually, the SU-File "_KT-Unterbau.skp" is a exported Component out of a much bigger drawing with the whole Cooling Plant.
So the path is like that:
Z100763_CustomerName_Coolingplant.skp
-> contains many Componets. also the "_KT-Unterbau" as a component.
This component i exported by "right-click, export to.." to the File "_KT-Unterbau.skp".
That file, is exactly what you are seeing on the first Screenshot in which i selected some more components, it contains.
Overall the mentioned 29 Components.. Each of them contain the Materials or, sometimes, also more nested components.
And again: i don´t know the capabilitys of the API.. but in any way also SU knows, which part i actually highlighting, because the Element-Info is showing me the attributes of it.. so, i guess, if there is any (definition-name)Variable what can be extracted to OCL for this, this should also be shown in the header. (if only one component is selected like in the last Screenshot "_KT-Unterbau, Geländer, kurze Stirn")
from lairdubois-opencutlist-sketchup-extension.
I talk about the current editing tree path in the model structure.
Idea with instance names :
![Capture d’écran 2023-08-26 à 21 32 57](https://private-user-images.githubusercontent.com/156056/263494284-ca4237bf-6081-4af3-b04d-b5839c7d17f5.png?jwt=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmF3LmdpdGh1YnVzZXJjb250ZW50LmNvbSIsImtleSI6ImtleTUiLCJleHAiOjE3MjE0NjU1MjEsIm5iZiI6MTcyMTQ2NTIyMSwicGF0aCI6Ii8xNTYwNTYvMjYzNDk0Mjg0LWNhNDIzN2JmLTYwODEtNGFmMy1iMDRkLWI1ODM5YzdkMTdmNS5wbmc_WC1BbXotQWxnb3JpdGhtPUFXUzQtSE1BQy1TSEEyNTYmWC1BbXotQ3JlZGVudGlhbD1BS0lBVkNPRFlMU0E1M1BRSzRaQSUyRjIwMjQwNzIwJTJGdXMtZWFzdC0xJTJGczMlMkZhd3M0X3JlcXVlc3QmWC1BbXotRGF0ZT0yMDI0MDcyMFQwODQ3MDFaJlgtQW16LUV4cGlyZXM9MzAwJlgtQW16LVNpZ25hdHVyZT0yOWVhMDBkZmU5OGI4OTczMTdhOWFkNTY2Yjk0YTNmMTAxMDk5ODdhMjQwMTgxOTkwZGNmNTU5M2NjNjY5MTRmJlgtQW16LVNpZ25lZEhlYWRlcnM9aG9zdCZhY3Rvcl9pZD0wJmtleV9pZD0wJnJlcG9faWQ9MCJ9.gHmkswyN94p2ayehOtHly7PGj4DHPq8xIbvQG5-Syeo)
from lairdubois-opencutlist-sketchup-extension.
Ah ok..
I closed my server connection for today.. i´ll give it a try tomorrow.
Thank you
from lairdubois-opencutlist-sketchup-extension.
i´ll give it a try tomorrow.
This is not currently available. It's just an idea tested to my DEV build 😉
from lairdubois-opencutlist-sketchup-extension.
Oh :D
Then i misunderstood you, sorry.
Yes, maybe not a bad idea.
Is it also available for definition names instead of instance names?
i´am not sure about it. I did almost never use instance names till now.
Let me think about it tomorrow :D
from lairdubois-opencutlist-sketchup-extension.
I guess, your idea could be a good solution.
from lairdubois-opencutlist-sketchup-extension.
5.0.3 is published. You can update and try feature.
Just be careful that this feature only uses instance names, not definition names of your components.
Because only instance can represent the true unique active path. And keep the user the choice of which part of the tree to use in this path.
from lairdubois-opencutlist-sketchup-extension.
Thank you, i will test soon as possible. 👍
from lairdubois-opencutlist-sketchup-extension.
Do i have to enable a special setting for it?
it doesn´t work for me..
Here i have a part (mirrored).
One with instance Name: Tankunterstützung, rechts
The other one with: Tankunterstützung, links
both are from a component named: Erweiterung
but on OCL it still shows only the name of the overall skp-File:
from lairdubois-opencutlist-sketchup-extension.
Related Issues (20)
- 'DimensionUtils' does not correctly read dimension : X' Y" HOT 1
- Open cutlist window does not launch on latest release of Sketchup 2023 after update HOT 5
- Skup HOT 2
- Adding more pages/views to "draw" HOT 2
- Directly drawn dimensions in "Generate draw" HOT 3
- Generate all at once HOT 1
- bug: cannot find support forum HOT 4
- Opencutlist will not open HOT 5
- Dimensional Lumber Estimation HOT 1
- Add the possibility of defining the density of materials in kg/unit on each standard dimension.
- Add an option to set a separator for currency
- BuG - gets stuck during cutting calculation HOT 66
- Error when cutting HOT 4
- Porting to FreeCAD HOT 3
- Import of materials and attributes HOT 8
- Depth looks reversed when exporting SVG HOT 6
- Edge Banding Name or Thickness on Parts List HOT 2
- Error interfaces HOT 2
- Visuels des pièces dans la fiche de débit HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from lairdubois-opencutlist-sketchup-extension.