TeleFrame funktioniert nach Neustart nicht mehr

[Chrissib1743]

TeleFrame funktioniert nach Neustart nicht mehr

[JanSHUP]

Try to disabe the "dtoverlay=vc4-fkms-v3d" that is added during the teleframe installation process to /boot/config.txt

1. If you have a fresh installed TeleFrame and did not already did your first reboot you can:

sudo nano /boot/config.txt

comment the last line from:

dtoverlay=vc4-fkms-v3d

to

#dtoverlay=vc4-fkms-v3d

In my case reboot is working then.

2. if you are already locked during boot and can't access your Pi but you enabled SSH you can switch on your raspberry pi without having your HDMI cable connected. After a few seconds you can reach it via SSH and do the steps from 1)

3. if you are locked in boot and did not enable SSH you can mount your RPI SD Card in another computer and change the config.txt in root folder like described in step 1)