Comments (13)
It's not clear to me at all what you're saying the problem is. Can you log in and boot into the graphical environment? Are you saying the keybinds don't work? Is it just the terminal keybinds or all of them? I.e. for example, can you run dmenu mod+d
?
There's a chance that the terminal is broken after a recent update. Can you run dmenu to open xfce-term, then run st from there and see if it outputs an error?
from larbs.
Sorry, to be clear:
- can login to i3 environment
- no key-chords (keybinds) work, nothing with
mod
, so I can't run dmenu - except I can get into the console via
ctrl-alt-F2
from larbs.
- Okay. I assume you've been logging in in the graphical environment/display manager? In that case, could you make sure you've logged off and then log in via
ctrl-alt-F2
or something, then runstartx
and see if the result is the same. - Either way, open up
~/.scripts/tools/remaps
and try one of the following:
a. Comment out thesetxkbmap
line and uncomment the commented one near it. (try the graphical environment again)
b. Do the above, plus remove thexcape
line. I suspectxcape
could be causing the problem here.
from larbs.
from larbs.
It appeared to me as though the mod key wasn't working when in actual fact the terminal wasn't installed so mod+enter didn't do anything so it appears that way boy
My fix was to install st and then set a var within .bashrc something like TERMINAL=st hopefully this helps
from larbs.
I was unable to get to this, I'm back.
Okay. I assume you've been logging in ...
Either way, open up ~/.scripts/tools/remaps and try one of the following:
a. Comment out the setxkbmap line and uncomment the commented one near it. (try the graphical environment again)
b. Do the above, plus remove the xcape line. I suspect xcape could be causing the problem here.
Neither 1. or 2. worked, and I wonder if there is something else wrong. I have a dual screen, and the desktop image is messed up on screen#1, fwiw.
I have looked at .profile, some other dotfiles, and skimmed the scripts to see if anything else could cause this. Nothing obvious, but I am fairly noob.
@alfbarb thanks, but I did set TERMINAL='xfce-terminal'
in .profile
, so that should not be an issue afaik.
As well, I would expect at least something to work, even if it were the terminal
EDIT: oh, and when I am in console the keyboard is a weird layout, know idea where that comes from, ie. #
is at the ~/`
key, /
key is some accented e
from larbs.
Uh, okay. What is your system default keyboard? Did you set any keyboard-related settings in Manjaro's GUI?
Could you comment out the
sudo -n loadkeys ~/.scripts/ttymaps.kmap 2>/dev/null
line at the end of ~/.profile
and see if that rectifies things? I'm really confused by this problem at this point.
from larbs.
Default is applealu_ansi
, apple keyboard, selected with the install wizard. Manjaro did a good job; the special keys for audio worked right out-of-the-box for both i3 and xfce. I didn't need to do a thing.
sudo -n loadkeys ~/.scripts/ttymaps.kmap 2>/dev/null
Didn't work.
I am wondering if it has something to do with installing i3 edition --> xfce4 packages --> LARBS. Some conflict somewhere that keeps login scripts from completing or something?
fyi right now I'm using ~/i3/config
that came with manjaro, but the problem was the same if I used your ~/config/i3/config
.
I'll poke around more tomorrow.
from larbs.
I had no idea that Apple keyboards required some special keyboard settings. Not surprised knowing them though. After doing a little reading it seems to me that that is nearly certainly exactly what your problem is.
You can refer to the Arch Wiki article on Apple Keyboards which along with the linked articles might push you in the direction of solving this, but I can't backseat drive you through a solution because I'm not familiar enough with them. It probably just has to do with the Super key not mapping properly, being some different Mod button.
If the solution is something easy like that, I can add a fix, but if fixing the solution involves totally rewriting the i3 config to use unreadable keycodes, I'm not so interested.
from larbs.
Tried another plain keyboard. Same problem. Something else is going on.
(nb I changed setxkbmap
for this keyboard)
I am randomly poking at dotfiles, scripts, and looking at larbs.sh to see what happened. Everything was working prior, but I also did system updates along the way, fwiw.
I will retry larbs.sh see what it does.
then I will look at doing some reinstall since I don't know enough to pinpoint the problem.
from larbs.
I've installed LARBS on Manjaro i3 now and it works perfectly. This is of course without a special keyboard and without installing xfce first. I suppose xfce could be the genesis of the problem as well but I can't estimate the problem.
from larbs.
Thanks for putting in this effort Luke.
I will work on it this weekend and get some VMs up as well.
from larbs.
Finally,
I tested on a new account and VM (with and without xfce-manjaro-*). Worked in all cases.
I updated larbs script and re-ran. Worked.
No idea what it was, but see @chris post below for possible cause
forum.manjaro.org
Thanks again for the help, and also for the good content you put out. Much appreciated.
from larbs.
Related Issues (20)
- Missing crontab HOT 1
- My old DE Plasms breaks
- WWAN doesnt recognise hardware HOT 1
- Multi-Monitor configuration: Cursor is abnormally large HOT 1
- Librewolf margins HOT 2
- Failed to install AUR helper
- Status bar tags displaying improperly with external display HOT 4
- Yay now requires go programming language installed!
- Issues with Larbs Installation: Screen Resolution, Brightness Adjustment, and Nvidia Driver Installation HOT 6
- Sudo not prompting for root password for secondary user on Arch Linux HOT 1
- /etc/profile.d/dbus is causing multiple instances of dbus HOT 2
- newsboat urls will replace with default
- Failed to Install AUR Helper HOT 4
- lf file manager stuck on "loading..." after previewing 2 or more files HOT 3
- this issues isn't fixed yet
- Some lightweight music players. HOT 4
- dead links on larbs.xyz HOT 1
- Include ffmpegthumbnailer to have thumbnails in lf HOT 1
- Keyboard Mapping Issues with Virtual Machines after Installing LARBS HOT 1
- screenkey not included in progs.csv, yet its included in dwm config.h HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from larbs.