Multiple Anchors

[makerfabs]

Multiple Anchors

[petex8989]

Were you able to figure out how to use multiple anchors?

[LowellSeal]

Simon, did you ever get anything working for TWR with multiple anchors?

[petex8989]

I was able to find a way to connect multiple anchors, you can check it out in my project on GitHub
https://github.com/petex8989/Indoor_Positioning_DW3000

[SimonSchirber]

Example Project: https://simonschirber.github.io/UWBWebsite/report
Code Repo: https://github.com/SimonSchirber/Ultra-Wide-Band-M202/tree/main/Main

See Anchor 1, Anchor 2, and initiator. Pretty much you just set new addresses on every anchor you add and set the initiator to look out for it. I also added a smoothing filter averaging every 10 samples a second because readings from one anchor from reading to reading seemed to change drastically with no movement

[kyuhyong]

Hi @SimonSchirber. Thanks for your post.
I tried to upload the code you posted but could not get it to work. Can you explain a little bit about the setup?
I'm also trying to set 2 anchors stationary on a platform and 1 tag is moving and detect the location of the tag on a stationary platform. Is this setup possible?