Comments (14)
timmehtimmeh
commented on June 4, 2024
Hi - sorry, there was an error in the documentation that's been fixed now. Try copying plugins/DremelGCodeWriter to the plugins folder of your cura install
from cura-dremel-printer-plugin.
WeavingColors
commented on June 4, 2024
That is exactly what I thought the issue was.
Luckily, I assumed that was the issue and tried that out.
Unfortunately, I am still experiencing an error when saving the file.
The Dremel 3D20 just doesn't want to budge. Im not sure what to do.
I followed all of the directions you have posted and it seems to work correctly.
It just wont print. (The file is saved as a Dremel file. But when the SD card is inputed and build begins, the printer doesnt move.)
(I work for the Pima County Public Library in the 101 Space and we are trying to use Cura to print our files...Thank you sooo much from PCPL!)
from cura-dremel-printer-plugin.
WeavingColors
commented on June 4, 2024
I will attempt to screen capture the error screen that pops up in Cura and post it to this thread.
from cura-dremel-printer-plugin.
timmehtimmeh
commented on June 4, 2024
@WeavingColors - thanks for helping debug this - I'll look into the issue tonight.
from cura-dremel-printer-plugin.
WeavingColors
commented on June 4, 2024
Also, the Cura logo does not pop up as the preview on the Dremel. It is just blank.
@timmehtimmeh You are most certainly welcome! Thank you so much for making this a reality. We appreciate your assistance and guidance.
from cura-dremel-printer-plugin.
timmehtimmeh
commented on June 4, 2024
@WeavingColors - when you post screenshots, could you also see if you could post the .g3drem file that was generated...thanks
from cura-dremel-printer-plugin.
WeavingColors
commented on June 4, 2024
@timmehtimmeh Yeah! Will do. I will post ASAP.
from cura-dremel-printer-plugin.
timmehtimmeh
commented on June 4, 2024
@WeavingColors - also if you could let me know which OS and version of cura you're using that would help greatly
from cura-dremel-printer-plugin.
WeavingColors
commented on June 4, 2024
from cura-dremel-printer-plugin.
WeavingColors
commented on June 4, 2024
from cura-dremel-printer-plugin.
WeavingColors
commented on June 4, 2024
I believe that is everything you requested. Please let me know if I can provide additional information.
from cura-dremel-printer-plugin.
timmehtimmeh
commented on June 4, 2024
@WeavingColors - awesome...thanks for the info. As suspected the plugin wasn't finding the cura bitmap. I've moved the bitmap data inside the plugin. Try downloading the zip file again, and overwrite plugins/DremelGCodeWriter/DremelGCodeWriter.py with the new one. Let me know if the new version works for you. I believe that you'll have to close down cura and re-open it before the plugin gets re-loaded
from cura-dremel-printer-plugin.
WeavingColors
commented on June 4, 2024
Absolutely lovely! The printer is up and running now!
Thank you so much from me, PCPL, and the 101 Space staff.
You have been absolutely terrific!
Best wishes!
from cura-dremel-printer-plugin.
timmehtimmeh
commented on June 4, 2024
Awesome to hear. Thanks for your help as well. Next time I'm in Tucson maybe I'll swing by to check out your setup.
from cura-dremel-printer-plugin.
Related Issues (20)
- Plugin DremelPrinterPlugin was not loaded because it could not be verified. HOT 4
- Updated branded build plate for 3D45 HOT 1
- Cura 5.4 "Unable to Slice" error due to missing minimum speed (3D45, 3D40) HOT 1
- 3D45 Does not preheat before starting HOT 5
- A version for 3D45 would be great HOT 6
- Mime type error when saving to removable drive after installing CuraBlender plugin HOT 11
- I have a 3D45 for you - drop me a line to [email protected] ! thanks HOT 14
- No Dremel printer available in printers list HOT 4
- cura 4.91 not loading dremel plugin HOT 5
- Acceleration Enabled by Default? HOT 11
- Remote monitoring camera 3d45 HOT 26
- Dremel Plugin doesn't work with Cura 5.0
- Cura Doesn't find printer when selecting "Add Printer by IP Address" HOT 3
- Request to pull printer definitions into Cura HOT 1
- "There are no file formats available to write with" HOT 4
- Small artifact at edges of calibration cube on the "X" face at the top and bottom of the "X" HOT 1
- Problems printing temperature tower on 3D45 HOT 20
- Add helpful comments to resulting gcode
- End G-code in machine settings causing issues
- Serial Connection Fails HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from cura-dremel-printer-plugin.