Find Event Procedure Name behaviour Change

[mjmatthiesen]

Find Event Procedure Name behaviour Change

[BazookaMusic]

This was added to ensure uniqueness after previous requests as mentioned. I will add this for triage to discuss if it should be configurable via some setting.

[dannoe]

see #7609 and this #7423

[mjmatthiesen]

see #7609 and this #7423

Old issues which per guidelines recommend opening a new issue. So here we are.

[mjmatthiesen]

It would really be appreciated. This approach was implemented based on a single suggestion that then was applied to everyone.

Meanwhile, this new approach falls out of code standards because it uses quotes. This means our devs have to alter it every single time now. A configuration similar to what the second comment suggested would be very worthwhile as it could easily be set with our default project config or vs code config.

[qutreson]

We discussed this and decided to close this issue. We recommend that you post this suggestion on having settings to configure the Find Event suggestions on our Ideas forum at aka.ms/BCIdeas. We are constantly monitoring top ideas and will consider them for a future release.

[mjmatthiesen]

We discussed this and decided to close this issue. We recommend that you post this suggestion on having settings to configure the Find Event suggestions on our Ideas forum at aka.ms/BCIdeas. We are constantly monitoring top ideas and will consider them for a future release.

Here it is then: https://experience.dynamics.com/ideas/idea/?ideaid=2c346c33-8cf2-ee11-a73d-6045bdb71da1

[mjmatthiesen]

Here it is then: experience.dynamics.com/ideas/idea/?ideaid=2c346c33-8cf2-ee11-a73d-6045bdb71da1

This idea already has more upvotes than the original suggestion now.