Arduino due board issue

[hoodaxd]

Arduino due board issue

[MagoKimbra]

Because the ramps 1.3 need arduino mega, not arduino due...

[hoodaxd]

i am making 3d printer using arduino due what should i use ?

[MagoKimbra]

Board for Arduino due...
/**

• SAM3X8E ARM Cortex M3
  */
  #define BOARD_PICCOLO_3D 1400 // PICCOLO_3D ARM 32 Arduino DUE
  #define BOARD_RADDS 1401 // RADDS ARM 32 bit board
  #define BOARD_RAMPS_FD_V1 1403 // RAMPS-FD V1 ARM 32 bit board
  #define BOARD_RAMPS_FD_V2 1404 // RAMPS-FD V2 ARM 32 bit board
  #define BOARD_CNCONTROLS_V14 1405 // CNControls V14
  #define BOARD_ULTIMAKER4DUE 1407 // Ultimaker Shield + Arduino DUE Aleksandr Varaksa mods (https://iworld4us.com/diy-3d-printer.html)
  #define BOARD_RAMPS_SMART_HFB 1411 // RAMPS-SMART (Power outputs: Hotend, Fan, Bed)
  #define BOARD_RAMPS_SMART_HHB 1412 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Bed)
  #define BOARD_RAMPS_SMART_HFF 1413 // RAMPS-SMART (Power outputs: Hotend, Fan0, Fan1)
  #define BOARD_RAMPS_SMART_HHF 1414 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Fan)
  #define BOARD_RAMPS4DUE 1430 // RAMPS4DUE with AndrewBCN's RAMPS mods (http://forums.reprap.org/read.php?219,479626,page=1) ARM 32 bit board
  #define BOARD_RAMPS_17_HFB 1433 // RAMPS 1.7 (Power outputs: Hotend, Fan, Bed)
  #define BOARD_ALLIGATOR_R2 1502 // ALLIGATOR R2 ARM 32 bit board
  #define BOARD_ALLIGATOR_R3 1503 // ALLIGATOR R3 ARM 32 bit board
  #define BOARD_RURAMPS4D_V11 1550 // RuRAMPS4Duo v1.1 (Power outputs: Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed)
  #define BOARD_RURAMPS4D_V13 1551 // RuRAMPS4Duo v1.3 (Power outputs: Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed)
  #define BOARD_ARCHIM2 1590 // UltiMachine Archim2 (with TMC2130 drivers)
  #define BOARD_ULTRATRONICS 1705 // Ultratronics v1.0 ARM 32 bit board

[hoodaxd]

you mean that in my Board.h should be like this :
or can u tell me how my Board.h be like cuz my edit is not right

/**

• MK4duo Firmware for 3D Printer, Laser and CNC
• Based on Marlin, Sprinter and grbl
• Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
• Copyright (c) 2020 Alberto Cotronei @MagoKimbra
• This program is free software: you can redistribute it and/or modify
• it under the terms of the GNU General Public License as published by
• the Free Software Foundation, either version 3 of the License, or
• (at your option) any later version.
• This program is distributed in the hope that it will be useful,
• but WITHOUT ANY WARRANTY; without even the implied warranty of
• MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• GNU General Public License for more details.
• You should have received a copy of the GNU General Public License
• along with this program. If not, see http://www.gnu.org/licenses/.

*/
#pragma once

// Macros for board type
#define BOARD_UNKNOWN -1
#define MB(board) (MOTHERBOARD==BOARD_##board)

/**

• RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560
  */
  //#define BOARD_RAMPS_OLD 3 // MEGA/RAMPS up to 1.2
  //#define BOARD_RAMPS_13_HFB 33 // RAMPS 1.3 / 1.4 (Power outputs: Hotend, Fan, Bed)
  //#define BOARD_RAMPS_13_HHB 34 // RAMPS 1.3 / 1.4 (Power outputs: Hotend0, Hotend1, Bed)
  //#define BOARD_RAMPS_13_HFF 35 // RAMPS 1.3 / 1.4 (Power outputs: Hotend, Fan, Fan)
  //#define BOARD_RAMPS_13_HHF 36 // RAMPS 1.3 / 1.4 (Power outputs: Hotend0, Hotend1, Fan)
  //#define BOARD_RAMPS_13_HHH 37 // RAMPS 1.3 / 1.4 (Power outputs: Hotend0, Hotend1, Hotend2)

/**

• RAMPS Derivates - ATmega1280, ATmega2560
  */
  //#define BOARD_ULTIMAKER 7 // Ultimaker
  //#define BOARD_SAINSMART_2IN1 39 // SainSmart 2 in 1
  //#define BOARD_MKS_BASE 40 // MKS BASE v1.0
  //#define BOARD_MKS_13 47 // MKS GEN v1.3 or 1.4
  //#define BOARD_TRIGORILLA 49 // TRIGORILLA (ANYCUBIC)
  //#define BOARD_MKS_GEN_L 53 // MKS GEN L
  //#define BOARD_AZTEEG_X3 67 // Azteeg X3
  //#define BOARD_AZTEEG_X3_PRO 68 // Azteeg X3 Pro
  //#define BOARD_ULTIMAKER_OLD 71 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
  //#define BOARD_ULTIMAIN_2 72 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
  //#define BOARD_GT2560_REV_A 74 // Geeetech GT2560 Rev. A
  //#define BOARD_GT2560_REV_A_PLUS 75 // Geeetech GT2560 Rev. A+
  //#define BOARD_GT2560_V3 76 // Geeetech GT2560 Rev. B for A10(M/D)
  //#define BOARD_GT2560_V3_A20 86 // Geeetech GT2560 Rev. B for A20(M/D)
  //#define BOARD_3DRAG 77 // 3Drag Controller
  //#define BOARD_K8200 78 // Vellemann K8200 Controller (variant of the 3Drag Controller)
  //#define BOARD_3DVERTEX 79 // 3DVertex Controller (Velleman K8400)
  //#define BOARD_RUMBA 80 // Rumba
  //#define BOARD_ANET 100 // Anet board for A2, A6 and A8
  //#define BOARD_RAMPS_ENDER_4 243 // Creality Ender-4, CR-8
  //#define BOARD_MAKEBOARD_MINI 431 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake

/**

• Other ATmega1280, ATmega2560
  */
  //#define BOARD_CHEAPTRONIC 2 // Cheaptronic v1.0
  //#define BOARD_ELEFU_3 21 // Elefu Ra Board (v3)
  //#define BOARD_MKS_MINI 41 // MKS MINI 1.0
  //#define BOARD_MEGATRONICS 70 // Megatronics
  //#define BOARD_RAMBO 301 // Rambo
  //#define BOARD_MINIRAMBO_10A 302 // Mini-Rambo 1.0a
  //#define BOARD_MINIRAMBO 303 // Mini-Rambo
  //#define BOARD_PIBOT 316 // PiBot Controller Rev2.0
  //#define BOARD_MEGATRONICS_2 701 // Megatronics v2.0
  //#define BOARD_MEGATRONICS_3 703 // Megatronics v3.0
  //#define BOARD_LEAPFROG 999 // Leapfrog

/**

• ATmega1281, ATmega2561
  */
  //#define BOARD_MINITRONICS 702 // Minitronics v1.0

/**

• Sanguinololu and Derivatives - ATmega644P, ATmega1284P
  */
  //#define BOARD_SANGUINOLOLU_11 6 // Sanguinololu < 1.2
  //#define BOARD_SANGUINOLOLU_12 62 // Sanguinololu 1.2 and above
  //#define BOARD_MELZI 63 // Melzi
  //#define BOARD_STB_11 64 // STB V1.1
  //#define BOARD_AZTEEG_X1 65 // Azteeg X1
  //#define BOARD_MELZI_CREALITY 89 // Melzi Creality3D board (for CR-10 etc)

/**

• Other ATmega644P, ATmega644, ATmega1284P
  */
  //#define BOARD_GEN6 5 // Gen6
  //#define BOARD_GEN3_PLUS 9 // Gen3+
  //#define BOARD_GEN7_CUSTOM 10 // Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
  //#define BOARD_GEN7_12 11 // Gen7 v1.1, v1.2
  //#define BOARD_GEN7_13 12 // Gen7 v1.3
  //#define BOARD_GEN7_14 13 // Gen7 v1.4
  //#define BOARD_SETHI 20 // Sethi 3D_1
  //#define BOARD_GEN3_MONOLITHIC 22 // Gen3 Monolithic Electronics
  //#define BOARD_OMCA_A 90 // Alpha OMCA board
  //#define BOARD_OMCA 91 // Final OMCA board

/**

• Teensyduino - AT90USB1286, AT90USB1286P
  */
  //#define BOARD_TEENSYLU 8 // Teensylu

/**

• Custom Boards
  */
  //#define BOARD_99 99 // Custom Board

/**

• SAM3X8E ARM Cortex M3
  */
  #define BOARD_PICCOLO_3D 1400 // PICCOLO_3D ARM 32 Arduino DUE
  #define BOARD_RADDS 1401 // RADDS ARM 32 bit board
  #define BOARD_RAMPS_FD_V1 1403 // RAMPS-FD V1 ARM 32 bit board
  #define BOARD_RAMPS_FD_V2 1404 // RAMPS-FD V2 ARM 32 bit board
  #define BOARD_CNCONTROLS_V14 1405 // CNControls V14
  #define BOARD_ULTIMAKER4DUE 1407 // Ultimaker Shield + Arduino DUE Aleksandr Varaksa mods (https://iworld4us.com/diy-3d-printer.html)
  #define BOARD_RAMPS_SMART_HFB 1411 // RAMPS-SMART (Power outputs: Hotend, Fan, Bed)
  #define BOARD_RAMPS_SMART_HHB 1412 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Bed)
  #define BOARD_RAMPS_SMART_HFF 1413 // RAMPS-SMART (Power outputs: Hotend, Fan0, Fan1)
  #define BOARD_RAMPS_SMART_HHF 1414 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Fan)
  #define BOARD_RAMPS4DUE 1430 // RAMPS4DUE with AndrewBCN's RAMPS mods (http://forums.reprap.org/read.php?219,479626,page=1) ARM 32 bit board
  #define BOARD_RAMPS_17_HFB 1433 // RAMPS 1.7 (Power outputs: Hotend, Fan, Bed)
  #define BOARD_ALLIGATOR_R2 1502 // ALLIGATOR R2 ARM 32 bit board
  #define BOARD_ALLIGATOR_R3 1503 // ALLIGATOR R3 ARM 32 bit board
  #define BOARD_RURAMPS4D_V11 1550 // RuRAMPS4Duo v1.1 (Power outputs: Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed)
  #define BOARD_RURAMPS4D_V13 1551 // RuRAMPS4Duo v1.3 (Power outputs: Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed)
  #define BOARD_ARCHIM2 1590 // UltiMachine Archim2 (with TMC2130 drivers)
  #define BOARD_ULTRATRONICS 1705 // Ultratronics v1.0 ARM 32 bit board

/**

• SAMD21J18
  */
  //#define BOARD_MINITRONICS_V2 2706 // Minitronics v2.0

/**

• STM32 ARM Cortex-M4F
  */
  //#define BOARD_RUMBA32_AUS3D 4203 // RUMBA32 STM32F446VET6 based controller from Aus3D
  //#define BOARD_RUMBA32_MKS 4204 // RUMBA32 STM32F446VET6 based controller from MKS
  //#define BOARD_STEVAL_3DP001V1 4206 // STEVAL-3DP001V1 3D PRINTER BOARD

[MagoKimbra]

You don't have to touch board.h, the type of board must be done in configuration_basic.h
#define MOTHERBOARD BOARD_RAMPS_13_HFB
Here you have to put the board you are using between those for Arduino due.

[hoodaxd]

i changed
#define MOTHERBOARD BOARD_RAMPS_13_HFB
#define MOTHERBOARD BOARD_PICCOLO_3D
now there is no error ty for help

[MagoKimbra]

But can you know what card you have ???