The latest version (V1.6) problem still exists

Question

The latest version (V1.6) problem still exists, my hardware is canable, similar to the

ChengHero · Answer

I think so too, the device is working very well, there are only some occasional proble

ChengHero · Answer

Regarding the issue of periodic sending, it should be my wrong operation, sorry

moonglow · Answer

Hi <a class="user-mention notranslate" data-hovercard-type="user" data-hovercard-url="

ChengHero · Answer

hi <a class="user-mention notranslate" data-hovercard-type="user" data-hovercard-url="

moonglow · Answer

Hm.. can you provide me more info:

ChengHero · Answer

Reinstalling 4.3.0 doesn't work either，My hardware is not orthodox, the soc is STM32F0

ChengHero · Answer

My canable hardware is personally designed with reference to the canable hardware on g

moonglow · Answer

So your adapter is connected to bus and work only few second ? correct ?

ChengHero · Answer

Worked for a split second before, not for a few seconds

moonglow · Answer

Your adapter is connected to active CAN bus ?

ChengHero · Answer

I tested it with PEAK-PCAN and it is OK

moonglow · Answer

So now all is OK ?

ChengHero · Answer

It still doesn't work, but it's ok to use genuine hardware

moonglow · Answer

Ah... OK, thank you. Please try old drivers as temporary solution.

ChengHero · Answer

thank you！！

ChengHero · Answer

hi ... <a class="user-mention notranslate" data-hovercard-type="user" data-hovercard-u

moonglow · Answer

I did try to upload canable precompiled firmware from my release page and it works fin

P208PUG · Answer

I did try to upload canable precompiled firmware from my release page and

The latest version (V1.6) problem still exists about pcan_cantact HOT 18 CLOSED