Status Screen reports: {{ notifications.notification[0].message[0] }} {{ notifications.notification[0].timestamp[0] | date:"EEE yyyy-MM-dd 'at' h:mma" }}

[nebulous]

Status Screen reports: {{ notifications.notification[0].message[0] }} {{ notifications.notification[0].timestamp[0] | date:"EEE yyyy-MM-dd 'at' h:mma" }}

[nebulous]

I should preface this by stressing again that Infinitude was not designed to work with non-touch, non-internet connected thermostats. For that I would recommend @acd's excellent Infinitive project.

The humidity gauge uses the humidity variable reported from the thermostat via webservice by default(which you wouldn't have available), but upgrades to the more quickly-refreshed serial version of the same data when it detects a serial stream. Unfortunately there is very little consistency between devices as to where they report values, so yours is likely reporting in a different place than others we have mapped. But good news! This is what the serial monitor was in fact designed for: inspecting the serial stream and identifying pertinent data. So if you report the register and offset of temp/humidity data, I'll integrate it into future versions of Infinitude.

[rcojoe]

Nebulous. Thank you for the feedback. I have used infinitive and liked it, and it does serve the purpose I was needing, which was to control my thermostat temp. I enjoyed your software, which was my first to hook to my network, and I'll see if time permits me to dive into this and map the humidity as well as other values. Thanks for your time on this project.