Debugging new serial setup

[nebulous]

Debugging new serial setup

[cheitzig]

A little bit more info: I got infinitive running just fine, so maybe it's something with the infinitude configuration on Bryant Evolution?

[nebulous]

Hi. It looks like cardump proves your physical serial interface is working properly. Since you say you got Infinitive working, does that mean you have a non-touch thermostat? Infinitude is designed to replace the public webservice for internet-connected touch thermostats, while Infinitive is designed to connect non-internet-connected thermostats to the internet. However, the serial monitor in Infinitude should work to view serial traffic regardless, if things are properly configured. The main thing that I notice about the screenshot above is that you don't appear to have all of the css/js loading (which would definitely cause failure to connect to Infinitude's websocket).

Here is what yours should roughly look like when operating in production mode:

I have a few features not-yet-in-the-repository visible in that screenshot, but you should see the tabs/colors/etc if everything is working.

How are you starting up Infinitude? Are there any errors visible?

[cheitzig]

I re-installed infinitude tonight, although I'm not sure if that was required. I also realized that I was probably running it incorrectly, so I fixed that too. Now, it's at least showing information on the status screen. I was actually seeing the CSS version of the webpage before; I think that potentially what fixed things was running cardump, which, based on another post I saw, resets the serial adapter.

What I'm seeing on the home screen is very similar to what issue #45 is showing, which, based on your response to that issue, is roughly what I should be seeing.

So I think I can close this issue. Infinitive does what I need it to do, although I found infinitude first, so thanks for creating this software!