Multi-purpose finite element library
Find the Open Source Community on https://ngsolve.org
Support & Services: https://cerbsim.com
Home Page: https://ngsolve.org
License: GNU Lesser General Public License v2.1
Multi-purpose finite element library
Find the Open Source Community on https://ngsolve.org
Support & Services: https://cerbsim.com
Should be something like "6.2.2004" instead of just "6.2" or "6.2-dev" in places like this
netgen/cmake/NetgenConfig.cmake.in
Line 1 in 9ffb22c
This patch version is used in the SMESH to define macros that decide which Netgen API to use in the SMESH source based on version number.
I was trying to volume mesh the attached file (file.zip, contains heap_corruption.stl) without surface meshing.
Function used: MESHING3_RESULT MeshVolume (const MeshingParameters & c_mp, Mesh& mesh3d)
The input stl file has a bad surface mesh so I was excepting netgen to throw an exception, but the program exited with exit code -1073740940 (C0000374), which refers to Heap Corruption.
Is there a version of Netgen that is handling the Heap Corruption issue and throws an exception before this happens?
The following are the print statements:
number of triangles = 876
topology_ok = 1
orientation_ok = 1
topology found
Check overlapping geometry ... 0 triangles overlap
CalcLocalH: 438 Points 0 Elements 876 Surface Elements
Check subdomain 1 / 1
Meshing subdomain 1 of 1
Use internal rules
Delaunay meshing
number of points: 438
blockfill local h
number of points: 477
Points: 477
Elements: 2858
Tree data entries per element: 1.57453
Tree nodes per element: 0.0311407
SwapImprove
SwapImprove
SwapImprove
SwapImprove
0 degenerated elements removed
Remove intersecting
Remove outer
445 points, 233 elements
start tetmeshing
Use internal rules
ImproveMesh
CombineImprove
ImproveMesh
SwapImprove
SwapImprove2
ImproveMesh
CombineImprove
ImproveMesh
SwapImprove
SwapImprove2
ImproveMesh
CombineImprove
ImproveMesh
SwapImprove
Netgen uses global static instances to store the meshing parameters, and process information, e.g. to terminate the task (netgen::multithread.terminate).
This design makes it dangerous/error prone to use Netgen functionality simultaneously from a single process.
I usually just patch 'mycout' and 'mycerr' etc. to a nullstream (see below). But this only prevents crashes, and does not solve the issue.
class NullStreambuf : public std::streambuf
{
char dummyBuffer[64];
protected:
virtual int overflow(int c)
{
setp(dummyBuffer, dummyBuffer + sizeof(dummyBuffer));
return (c == traits_type::eof()) ? '\0' : c;
}
};
void Ng_Init () {
static ostream* null_stream = new ostream(new NullStreambuf);
mycerr = null_stream;
...
}
kl-18448:netgen szampini$ git branch
/Users/szampini/Devel/ngsolve/external_dependencies/netgen/libsrc/meshing/meshtype.cpp:23:32: warning: implicit conversion of NULL constant to 'MPI_Datatype' (aka 'int') [-Wnull-conversion]
static MPI_Datatype type = NULL;
~~~~ ^~~~
0
/Users/szampini/Devel/ngsolve/external_dependencies/netgen/libsrc/meshing/meshtype.cpp:24:33: warning: implicit conversion of NULL constant to 'MPI_Datatype' (aka 'int') [-Wnull-conversion]
static MPI_Datatype htype = NULL;
~~~~~ ^~~~
0
2 warnings generated.
You should use MPI_DATATYPE_NULL, since MPICH uses integer variables for MPI null objects, see https://www.mpich.org/static/docs/latest/www3/Constants.html
Hello, I'm trying to compile netgen on my gentoo linux box. I have tcl and tk version 8.6.6 installed, as well as tix-8.4.3 and togl-2.0.
When build target togl I get the an error that cmake is not finding tkInt.h in togl.c. As this is an tk internal header file, which I have not seen installed for a very long time together with tk, I tried to commenting out the #include statement but now I'm getting an error about TkWindow, which, to my knowledge is also the internal representation of Tk_Window and usually not available in the system include files.
These are the errors as noted above:
[ 90%] Building C object ng/Togl2.1/CMakeFiles/togl.dir/togl.c.o
cd /var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804_build/ng/Togl2.1 && /usr/bin/mpicc -DFFMPEG -DHAVE_DLFCN_H -DINTERNAL_TCL_DEFAULT=1 -DJPEGLIB -DMETIS -DNETGEN_VERSION=\"6.2-dev\" -DNG_PYTHON -DOPENGL -DPACKAGE_NAME="\"Togl\" -DPACKAGE_TARNAME=\"togl\" -DPACKAGE_VERSION=\"2.1\" -DPACKAGE_STRING=\"Togl 2.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=0 -DHAVE_LIMITS_H=1 -DHAVE_SYS_PARAM_H=1 -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -D_THREAD_SAFE=1 -DTCL_THREADS=1 -DMODULE_SCOPE=extern __attribute__((__visibility__(\"hidden\"))) -D_LARGEFILE64_SOURCE=1 -DTCL_WIDE_INT_IS_LONG=1 -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 -DAUTOSTEREOD=\"\"" -DPARALLEL -DTCL -DTOGL_X11 -DUSE_TOGL_2 -D__STDC_CONSTANT_MACROS -I/var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804_build/ng/Togl2.1 -I/var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804/ng/Togl2.1 -I/usr/include/../PrivateHeaders -I/usr/include/tk-private/generic/ttk -I/usr/include/tk-private -I/usr/include/tk-private/unix -I/usr/include/tk-private/generic -I/usr/include/tcl-private/unix -I/usr/include/tcl-private/generic -I/var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804_build -I/var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804/include -I/var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804/libsrc/include -I/usr/include/python3.6m -DNDEBUG -O2 -pipe -march=bdver2 -mprefer-avx128 -mvzeroupper -fomit-frame-pointer -Wno-implicit-int -fPIC -o CMakeFiles/togl.dir/togl.c.o -c /var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804/ng/Togl2.1/togl.c
/var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804/ng/Togl2.1/togl.c:19:10: fatal error: tkInt.h: No such file or directory
#include <tkInt.h> // don't need it on osx ???
^~~~~~~~~
compilation terminated.
and
cd /var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804_build/ng/Togl2.1 && /usr/bin/mpicc -DFFMPEG -DHAVE_DLFCN_H -DINTERNAL_TCL_DEFAULT=1 -DJPEGLIB -DMETIS -DNETGEN_VERSION=\"6.2-dev\" -DNG_PYTHON -DOPENGL -DPACKAGE_NAME="\"Togl\" -DPACKAGE_TARNAME=\"togl\" -DPACKAGE_VERSION=\"2.1\" -DPACKAGE_STRING=\"Togl 2.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=0 -DHAVE_LIMITS_H=1 -DHAVE_SYS_PARAM_H=1 -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -D_THREAD_SAFE=1 -DTCL_THREADS=1 -DMODULE_SCOPE=extern __attribute__((__visibility__(\"hidden\"))) -D_LARGEFILE64_SOURCE=1 -DTCL_WIDE_INT_IS_LONG=1 -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 -DAUTOSTEREOD=\"\"" -DPARALLEL -DTCL -DTOGL_X11 -DUSE_TOGL_2 -D__STDC_CONSTANT_MACROS -I/var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804_build/ng/Togl2.1 -I/var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804/ng/Togl2.1 -I/usr/include/../PrivateHeaders -I/usr/include/tk-private/generic/ttk -I/usr/include/tk-private -I/usr/include/tk-private/unix -I/usr/include/tk-private/generic -I/usr/include/tcl-private/unix -I/usr/include/tcl-private/generic -I/var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804_build -I/var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804/include -I/var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804/libsrc/include -I/usr/include/python3.6m -DNDEBUG -O2 -pipe -march=bdver2 -mprefer-avx128 -mvzeroupper -fomit-frame-pointer -Wno-implicit-int -fPIC -o CMakeFiles/togl.dir/togl.c.o -c /var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804/ng/Togl2.1/togl.c
/var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804/ng/Togl2.1/togl.c: In function ‘SetupOverlay’:
/var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804/ng/Togl2.1/togl.c:2829:5: error: unknown type name ‘TkWindow’; did you mean ‘Tk_Window’?
TkWindow *winPtr = (TkWindow *) togl->TkWin;
^~~~~~~~
Tk_Window
/var/tmp/portage/sci-mathematics/netgen-6.2.1804/work/netgen-6.2.1804/ng/Togl2.1/togl.c:2829:25: error: ‘TkWindow’ undeclared (first use in this function); did you mean ‘Tk_Window’?
TkWindow *winPtr = (TkWindow *) togl->TkWin;
^~~~~~~~
Tk_Window
Hi, new user to netgen. I'm on up to date Arch Linux trying to run Netgen 6.2-dev as installed from the AUR. When I try to use Edit Face Mesh Size in the geometry menu I get the following error and the pop-up window is entirely empty.
ERROR: unknown option "-padx"
errinfo: unknown option "-padx"
while executing
"ttk::label $w.face.ent -text 1 -padx 4"
(procedure "surfacemeshsizedialog" line 11)
invoked from within
"surfacemeshsizedialog "
invoked from within
".#ngmenu.#ngmenu#geometry invoke active"
("uplevel" body line 1)
invoked from within
"uplevel #0 [list $w invoke active]"
(procedure "tk::MenuInvoke" line 50)
invoked from within
"tk::MenuInvoke .#ngmenu.#ngmenu#geometry 1"
(command bound to event)
What is the C++ equivalent to
mesh.Export("export.stl")
or
mesh.Export("export.msh","Gmsh Format")
For me, the python binding is not self explanatory. Is there documentation on how to convert between the supported volume/surface formats?
Thanks!
I try to build a version of FreeCAD with netgen enabled for FEM meshing. But it looks like that something does not work and the meshes are broken (OT but if someone has some idea in this direction, please follow the thread in the FC forum: https://forum.freecadweb.org/viewtopic.php?f=4&t=37249)
I saw repeatedly, that there are some warnings in the compiler log, usually like this:
00:29:35 O: In file included from /usr/include/netgen/include/../general/myadt.hpp:17,
00:29:35 O: from /usr/include/netgen/include/../meshing/../include/myadt.hpp:1,
00:29:35 O: from /usr/include/netgen/include/../meshing/meshing.hpp:6,
00:29:35 O: from /usr/include/netgen/include/meshing.hpp:1,
00:29:35 O: from /usr/include/netgen/include/../occ/occgeom.hpp:12,
00:29:35 O: from /usr/include/netgen/include/occgeom.hpp:1,
00:29:35 O: from /build/freecad-daily-0.19+git201907030013~daily/src/3rdParty/salomesmesh/src/NETGENPlugin/NETGENPlugin_NETGEN_3D.cpp:73:
00:29:35 O: /usr/include/netgen/include/../general/../include/mydefs.hpp:26: warning: "DLL_HEADER" redefined
00:29:35 O: #define DLL_HEADER __attribute__ ((visibility ("default")))
00:29:35 O:
00:29:35 O: In file included from /build/freecad-daily-0.19+git201907030013~daily/src/3rdParty/salomesmesh/inc/NETGENPlugin_Mesher.hxx:42,
00:29:35 O: from /build/freecad-daily-0.19+git201907030013~daily/src/3rdParty/salomesmesh/inc/NETGENPlugin_NETGEN_3D.hxx:35,
00:29:35 O: from /build/freecad-daily-0.19+git201907030013~daily/src/3rdParty/salomesmesh/src/NETGENPlugin/NETGENPlugin_NETGEN_3D.cpp:31:
00:29:35 O: /usr/include/netgen/nglib.h:33: note: this is the location of the previous definition
00:29:35 O: #define DLL_HEADER
The problem is, this piece of code:
Lines 24 to 34 in 95efdd2
nglib.h
is used together with some other header which includes mydefs.hpp
it will come to this redefintion: netgen/libsrc/include/mydefs.hpp
Lines 18 to 30 in 18044b8
Now, the bad thing is, both codes are different - the one in mydefs.hpp
was changed more recently.
I guess there should be some include guard or the DLL_HEADER
should be put into a separate header file.
There is also nginterface.hpp
which defines DLL_HEADER
.
As far as I can see, the project builds just fine otherwise.
I also do not fully understand the structure of the header files. At least on debian, there are several files duplicated: https://packages.debian.org/sid/amd64/netgen-headers/filelist
For example /usr/include/netgen/include/{mydefs.hpp,nginterface.h}
are the same as /usr/include/netgen/{mydefs.hpp,nginterface.h}
.
Other files in the /usr/include/netgen/include
folder simply include just one file with the same name in another subfolder of /usr/include/netgen/
, others define own stuff. Is all this duplication necessary or just backwards compatability?
Thanks in advance!
Seeing this issue here:
https://dev.azure.com/conda-forge/feedstock-builds/_build/results?buildId=188298&view=logs&jobId=e5cdccbf-4751-5a24-7406-185c9d30d021&j=171a126d-c574-5c8c-1269-ff3b989e923d&t=1183ba29-a0b5-5324-8463-2a49ace9e213
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "D:\bld\netgen_1595537404202\_test_env\lib\site-packages\netgen\__init__.py", line 13, in <module>
from . import libngpy
ImportError: DLL load failed: A dynamic link library (DLL) initialization routine failed.
IIRC there was a similar issue some times ago which was solved by disabling USE_NATIVE_ARCH
. Not sure why this comes up again.
edit: no idea what is wrong here. We didn't run into this issue with v6.2.2006
Hello netgen team,
Just wanted to check in and ask if there is an issue with the PRs that are pending? Would you mind reviewing them ?
Thanks!
During porting of NETGEN-plugin of SALOME to NETGEN-6 I faced an error like SIGSEGV. I applied valgrind to my program and it showed me two errors in netgen
const auto& pout3d = locpoints.Get(pouti);
locpoints.Append (pout3d); // <<--- error occures here.
pout3d
is deleted when locpoints
resizes in Append()
. To fix, remove & as follows
auto pout3d = locpoints.Get(pouti);
if(maxarea > 0 && meshedarea-meshedarea_before > maxarea)
The uninitialised value here is meshedarea
whose uninitialised value is set at line 361
meshedarea = mesh.SurfaceArea();
because Mesh::CSurfaceArea::area
is not initialized in CSurfaceArea
constructor
Hello, the question of the license for these files came up during review of the Netgen Debian package, could you please clarify?
Is there any documentation about interface changes between these versions. As you might know FreeCAD is relying on netgen via smesh and we currently see problems in updating to the latest available netgen version.
What happend to OCCRefinementSurfaces
?
Hello
Thank you for your library. I am trying to call netgen from a c++ code build simple geometries & generate meshes (based on code in python_csg.cpp).
https://gist.github.com/xgarnaud/617de4c73d8e0a916b4963d39adfd0eb
However I get segfaults if I uncomment l. 27 in main.cc or if I use l. 11 instead of l.10. So I guess I am doing something wrong. Could you please point me in the right direction?
Best regards.
I would like to add netgen to the conda-forge channel. Currently there are several netgen-packages available with conda:
Maybe we could try to combine this packages and make one that is more official and satisfy all the needs of the dependent libraries.
nglib parameters defines 'fineness'. However that value is never transferred to the internal parameter structure.
I only want to build nglib without visualization and python support. So far, I was unable to build netgen with
Enabled functionality:
OCC: ............... ON
JPEGlib: ........... OFF
FFMPEG: ............ OFF
GUI: ............... OFF
MPI: ............... OFF
PYTHON: ............ OFF
because pybind is still included.
In file included from /Users/miho/software/netgen/libsrc/meshing/meshclass.cpp:4:
/Users/miho/software/netgen/libsrc/core/python_ngcore.hpp:5:10: fatal error: 'pybind11/pybind11.h' file not found
Netgen provides several shared libraries, e.g. nglib. However, the resultant libnglib.so does not have its SONAME set properly, which is problematic for packaging Netgen and for other applications depending on it.
There is additional CMake configuration needed to fix this. For example, there should be something that functionally does this:
set_target_properties(nglib PROPERTIES VERSION 6.2.1804 SOVERSION 6.2)
The actual implementation should replace nglib
something that targets all the shared libraries, and use things like ${NETGEN_VERSION_MAJOR}
as well in replacement of the concrete example above.
Hi, I have anaconda and archlinux installed, and using netgen-git from the AUR of archlinux. However I failed to build netgen, and the error logs are,
[ 99%] Linking CXX executable netgen
/usr/bin/ld: /usr/lib/libSM.so.6: undefined reference to `uuid_generate@UUID_1.0'
/usr/bin/ld: /usr/lib/libSM.so.6: undefined reference to `uuid_unparse_lower@UUID_1.0'
collect2: error: ld returned 1 exit status
make[5]: *** [ng/CMakeFiles/netgen.dir/build.make:157: ng/netgen] Error 1
make[4]: *** [CMakeFiles/Makefile2:1732: ng/CMakeFiles/netgen.dir/all] Error 2
make[3]: *** [Makefile:163: all] Error 2
make[2]: *** [CMakeFiles/netgen.dir/build.make:116: dependencies/src/netgen-stamp/netgen-build] Error 2
make[1]: *** [CMakeFiles/Makefile2:105: CMakeFiles/netgen.dir/all] Error 2
make: *** [Makefile:130: all] Error 2
Any suggestion?
Can netgen compile on Win7 Operation? Is python3.5 required?
When I cancel the gui and python option, Errors happend in compiling.
error info as followings:
NGSolveBin\netgen\CMakeFiles\CMakeTmp\CheckIncludeFiles.c(2): fatal error C1083: 无法打开包括文件: “dlfcn.h”: No such file or directory
running the ng_occ example in nglib/ng_occ.cpp results in the following exception:
ngcore::Exception: ProjectPointGI not overloaded in classnetgen::NetgenGeometry
The throw is located in libsrc/meshing/basegeom.hpp:111
Full output:
Netgen NgLib - OpenCascade Test Case
Number of colours in STEP File: 0
Highest entry in topology hierarchy:
1 solid(s)
Successfully loaded STEP File: cyl.stp
ng_res = 0
Successfully extracted the Face Map....:3
Index: 1 :: Area: 1260.01 :: Hash: 48081
Index: 2 :: Area: 313.655 :: Hash: 61793
Index: 3 :: Area: 313.655 :: Hash: 64785
Setting Local Mesh size.....
OCC Mesh Pointer before call = 0x7fd1f2800600
Local Mesh size successfully set.....
OCC Mesh Pointer after call = 0x7fd1f2800600
Creating Edge Mesh.....
Edge Mesh successfully created.....
Number of points = 27
Creating Surface Mesh.....
load internal triangle rules
Face 1 / 3 (plane space projection)
Surface meshing done
0 illegal triangles
Face 2 / 3 (plane space projection)
Surface meshing done
0 illegal triangles
Face 3 / 3 (plane space projection)
Surface meshing done
0 illegal triangles
Optimize Surface 1
Edgeswapping, topological
Smoothing
libc++abi.dylib: terminating with uncaught exception of type ngcore::Exception: ProjectPointGI not overloaded in classnetgen::NetgenGeometry
Looks like the implementation of ProjectPointGI()
is missing.
When calling netgen -batchmode -geofile=xyz.geo
the xyz.geo
was not passing out to ng.tcl
. I guess the Tcl interpreter was swallowing the string before it got back out to the ng.tcl
at line 156. It needs to be copied before being passed.
set geofilename [Ng_GetCommandLineParameter geofile]
Tcl version 8.6. Ubuntu 18.04. Latest git revision: commit 15e6802.
The fix:
diff --git a/ng/ngpkg.cpp b/ng/ngpkg.cpp
index 102208c..e18db3c 100644
--- a/ng/ngpkg.cpp
+++ b/ng/ngpkg.cpp
@@ -1302,7 +1302,7 @@ namespace netgen
if (parameters.StringFlagDefined (argv[1]))
Tcl_SetResult (interp,
- (char*)parameters.GetStringFlag (argv[1], NULL).c_str(), TCL_STATIC);
+ (char*)parameters.GetStringFlag (argv[1], NULL).c_str(), TCL_VOLATILE);
else if (parameters.NumFlagDefined (argv[1]))
{
sprintf (buf, "%lf", parameters.GetNumFlag (argv[1], 0));
Dear Netgen Community,
It seems there is a different behavior if you specify your geometry using CSG format (.geo) or if you use OpenCASCADE CAD format (.step with colors).
I have a .step geometry made of two solids - a sphere and a box. The sphere is fully contained within the box. It is similar to the trafo.geo example where 4 different solids are fully contain within one box: https://github.com/NGSolve/netgen/blob/master/tutorials/trafo.geo
As it is the case with the trafo.geo example, my goal is to have a single volume mesh where the surface boundary is respected by the volume mesh and where all Tet elements are connected to each others.
However, what is obtain is a simple append of two unconnected volume mesh, one for the sphere and one for the box.
The .step file is include in the sphere_in_cube.zip file here attached:
sphere_in_cube.zip
Result of a connectivity filter in Paraview shows two distinct unconnected volume mesh:
I am trying to build v.6.2.1909 in Windows 10 Win64...
cmake .. -G "Visual Studio 14 2015 Win64" -DUSE_GUI=OFF
and while building from Visual Studio I get the error code C1001 four times for file type_traits.hpp, line 46.
the following is the detailed error message:
3>------ Rebuild All started: Project: netgen, Configuration: Release x64 ------
3> Creating directories for 'netgen'
3> Performing check_submodules step for 'netgen'
3> Building Custom Rule E:/Repository/netgen/CMakeLists.txt
3> No download step for 'netgen'
3> No update step for 'netgen'
3> No patch step for 'netgen'
3> Performing configure step for 'netgen'
3> -- Selecting Windows SDK version 10.0.14393.0 to target Windows 10.0.17763.
3> -- pybind11 v2.4.dev4
3> -- Found Pybind11: E:/Repository/netgen/external_dependencies/pybind11/include
3> CMake Warning at python/CMakeLists.txt:18 (message):
3> pybind11-stubgen not found, if you want to create stub files
3>
3> for better autocompletion support install it with pip.
3>
3>
3>
3> ------------------------------------------------------------------------
3> Netgen 6.2-20021: Automatic configuration OK.
3>
3> Build type: RelWithDebInfo
3> Flags: /MD /Zi /O2 /Ob1 /DNDEBUG /DWIN32 /D_WINDOWS /W0 /GR /EHsc /MP
3>
3> Enabled functionality:
3>
3> OCC: ............... OFF
3> JPEGlib: ........... OFF
3> FFMPEG: ............ OFF
3> GUI: ............... OFF
3> MPI: ............... OFF
3> PYTHON: ............ ON
3>
3>
3> Building:
3>
3> Open E:/Repository/netgen/build/netgen/Netgen.sln and build solution to compile Netgen.
3>
3> Build "INSTALL" to install Netgen.
3>
3>
3> Install directory:
3>
3> C:/netgen
3>
3> Please set the following environment variables:
3>
3> NETGENDIR=C:/netgen/bin
3> PYTHONPATH=.:C:/netgen/Lib/site-packages
3>
3> ------------------------------------------------------------------------
3>
3> -- Configuring done
3> -- Generating done
3> -- Build files have been written to: E:/Repository/netgen/build/netgen
3> Performing check_submodules1 step for 'netgen'
3> Performing build step for 'netgen'
3> Microsoft (R) Build Engine version 14.0.25420.1
3> Copyright (C) Microsoft Corporation. All rights reserved.
3>
3> localheap.cpp
3> table.cpp
3> taskmanager.cpp
3> python_ngcore.cpp
3>e:\repository\netgen\libsrc\core\type_traits.hpp(46): fatal error C1001: An internal error has occurred in the compiler. [E:\Repository\netgen\build\netgen\libsrc\core\ngcore.vcxproj]
3> (compiler file 'f:\dd\vctools\compiler\cxxfe\sl\p1\c\template.cpp', line 13166)
3> To work around this problem, try simplifying or changing the program near the locations listed above.
3> Please choose the Technical Support command on the Visual C++
3> Help menu, or open the Technical Support help file for more information (compiling source file E:\Repository\netgen\libsrc\core\localheap.cpp)
3> e:\repository\netgen\libsrc\core\type_traits.hpp(52): note: see reference to class template instantiation 'ngcore::detail::has_Range<std::T>' being compiled
3> with
3> [
3> T=std::size_t
3> ] (compiling source file E:\Repository\netgen\libsrc\core\localheap.cpp)
3> e:\repository\netgen\libsrc\core\type_traits.hpp(46): note: see reference to variable template 'const bool has_range<unsigned __int64>' being compiled (compiling source file E:\Repository\netgen\libsrc\core\localheap.cpp)
3> e:\repository\netgen\libsrc\core\array.hpp(333): note: see reference to class template instantiation 'ngcore::T_Range<std::size_t>' being compiled (compiling source file E:\Repository\netgen\libsrc\core\localheap.cpp)
3>e:\repository\netgen\libsrc\core\type_traits.hpp(46): fatal error C1001: An internal error has occurred in the compiler. [E:\Repository\netgen\build\netgen\libsrc\core\ngcore.vcxproj]
3> (compiler file 'f:\dd\vctools\compiler\cxxfe\sl\p1\c\template.cpp', line 13166)
3> To work around this problem, try simplifying or changing the program near the locations listed above.
3> Please choose the Technical Support command on the Visual C++
3> Help menu, or open the Technical Support help file for more information (compiling source file E:\Repository\netgen\libsrc\core\table.cpp)
3> e:\repository\netgen\libsrc\core\type_traits.hpp(52): note: see reference to class template instantiation 'ngcore::detail::has_Range<std::T>' being compiled
3> with
3> [
3> T=std::size_t
3> ] (compiling source file E:\Repository\netgen\libsrc\core\table.cpp)
3> e:\repository\netgen\libsrc\core\type_traits.hpp(46): note: see reference to variable template 'const bool has_range<unsigned __int64>' being compiled (compiling source file E:\Repository\netgen\libsrc\core\table.cpp)
3> e:\repository\netgen\libsrc\core\array.hpp(333): note: see reference to class template instantiation 'ngcore::T_Range<std::size_t>' being compiled (compiling source file E:\Repository\netgen\libsrc\core\table.cpp)
3>e:\repository\netgen\libsrc\core\type_traits.hpp(46): fatal error C1001: An internal error has occurred in the compiler. [E:\Repository\netgen\build\netgen\libsrc\core\ngcore.vcxproj]
3> (compiler file 'f:\dd\vctools\compiler\cxxfe\sl\p1\c\template.cpp', line 13166)
3> To work around this problem, try simplifying or changing the program near the locations listed above.
3> Please choose the Technical Support command on the Visual C++
3> Help menu, or open the Technical Support help file for more information (compiling source file E:\Repository\netgen\libsrc\core\taskmanager.cpp)
3> e:\repository\netgen\libsrc\core\type_traits.hpp(52): note: see reference to class template instantiation 'ngcore::detail::has_Range<std::T>' being compiled
3> with
3> [
3> T=std::size_t
3> ] (compiling source file E:\Repository\netgen\libsrc\core\taskmanager.cpp)
3> e:\repository\netgen\libsrc\core\type_traits.hpp(46): note: see reference to variable template 'const bool has_range<unsigned __int64>' being compiled (compiling source file E:\Repository\netgen\libsrc\core\taskmanager.cpp)
3> e:\repository\netgen\libsrc\core\array.hpp(333): note: see reference to class template instantiation 'ngcore::T_Range<std::size_t>' being compiled (compiling source file E:\Repository\netgen\libsrc\core\taskmanager.cpp)
3>e:\repository\netgen\libsrc\core\type_traits.hpp(46): fatal error C1001: An internal error has occurred in the compiler. [E:\Repository\netgen\build\netgen\libsrc\core\ngcore.vcxproj]
3> (compiler file 'f:\dd\vctools\compiler\cxxfe\sl\p1\c\template.cpp', line 13166)
3> To work around this problem, try simplifying or changing the program near the locations listed above.
3> Please choose the Technical Support command on the Visual C++
3> Help menu, or open the Technical Support help file for more information (compiling source file E:\Repository\netgen\libsrc\core\python_ngcore.cpp)
3> e:\repository\netgen\libsrc\core\type_traits.hpp(52): note: see reference to class template instantiation 'ngcore::detail::has_Range<T>' being compiled
3> with
3> [
3> T=int
3> ] (compiling source file E:\Repository\netgen\libsrc\core\python_ngcore.cpp)
3> e:\repository\netgen\libsrc\core\type_traits.hpp(46): note: see reference to variable template 'const bool has_range<int>' being compiled (compiling source file E:\Repository\netgen\libsrc\core\python_ngcore.cpp)
3> e:\repository\netgen\external_dependencies\pybind11\include\pybind11\cast.h(1587): note: see reference to class template instantiation 'pybind11::detail::descr<8>' being compiled (compiling source file E:\Repository\netgen\libsrc\core\python_ngcore.cpp)
3> e:\repository\netgen\external_dependencies\pybind11\include\pybind11\cast.h(1585): note: see reference to class template instantiation 'pybind11::detail::descr<5>' being compiled (compiling source file E:\Repository\netgen\libsrc\core\python_ngcore.cpp)
3> e:\repository\netgen\external_dependencies\pybind11\include\pybind11\cast.h(1138): note: see reference to class template instantiation 'pybind11::detail::descr<7>' being compiled (compiling source file E:\Repository\netgen\libsrc\core\python_ngcore.cpp)
========== Rebuild All: 2 succeeded, 1 failed, 0 skipped ==========
Is there any workaround for this issue?
please have a look at:
conda-forge/netgen-feedstock#14
For linux we build for gcc (4.8 / 7.3) x py (2.7 / 3.6 / 3.7). So this is alread a quite big build-matrix. Maybe someone can have a look and give some hints for the problems. Maybe some modifications in the source could make netgen more solid for compiling on different system / distros.
I'm trying to run the tests while packaging this for Gentoo and ran into failing tests
Start testing: Oct 15 12:41 -00
----------------------------------------------------------
1/7 Testing: unit_tests_built
1/7 Test: unit_tests_built
Command: "/usr/bin/cmake" "--build" "." "--target" "unit_tests" "--config" "Gentoo"
Directory: /var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008_build/tests/catch/../..
"unit_tests_built" start time: Oct 15 12:41 -00
Output:
----------------------------------------------------------
[1/1] cd /var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008_build && /usr/bin/cmake -DBDIR=/var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008_build -P /var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008/cmake/generate_version_file.cmake
-- Found Git: /usr/bin/git (found version "2.28.0")
CMake Warning at /var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008/cmake/generate_version_file.cmake:18 (MESSAGE):
Could not determine git-version from source code - assuming 6.2.0.0
<end of output>
Test time = 0.03 sec
----------------------------------------------------------
Test Passed.
"unit_tests_built" end time: Oct 15 12:41 -00
"unit_tests_built" time elapsed: 00:00:00
----------------------------------------------------------
2/7 Testing: unit_archive
2/7 Test: unit_archive
Command: "/var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008_build/tests/catch/test_archive"
Directory: /var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008_build/tests/catch
"unit_archive" start time: Oct 15 12:41 -00
Output:
----------------------------------------------------------
terminate called after throwing an instance of 'std::invalid_argument'
what(): stoi
<end of output>
Test time = 0.00 sec
----------------------------------------------------------
Test Failed.
"unit_archive" end time: Oct 15 12:41 -00
"unit_archive" time elapsed: 00:00:00
----------------------------------------------------------
3/7 Testing: unit_array
3/7 Test: unit_array
Command: "/var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008_build/tests/catch/test_array"
Directory: /var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008_build/tests/catch
"unit_array" start time: Oct 15 12:41 -00
Output:
----------------------------------------------------------
===============================================================================
All tests passed (37 assertions in 1 test case)
<end of output>
Test time = 0.00 sec
----------------------------------------------------------
Test Passed.
"unit_array" end time: Oct 15 12:41 -00
"unit_array" time elapsed: 00:00:00
----------------------------------------------------------
4/7 Testing: unit_symboltable
4/7 Test: unit_symboltable
Command: "/var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008_build/tests/catch/test_symboltable"
Directory: /var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008_build/tests/catch
"unit_symboltable" start time: Oct 15 12:41 -00
Output:
----------------------------------------------------------
terminate called after throwing an instance of 'std::invalid_argument'
what(): stoi
<end of output>
Test time = 0.00 sec
----------------------------------------------------------
Test Failed.
"unit_symboltable" end time: Oct 15 12:41 -00
"unit_symboltable" time elapsed: 00:00:00
----------------------------------------------------------
5/7 Testing: unit_utils
5/7 Test: unit_utils
Command: "/var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008_build/tests/catch/test_utils"
Directory: /var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008_build/tests/catch
"unit_utils" start time: Oct 15 12:41 -00
Output:
----------------------------------------------------------
terminate called after throwing an instance of 'std::invalid_argument'
what(): stoi
<end of output>
Test time = 0.00 sec
----------------------------------------------------------
Test Failed.
"unit_utils" end time: Oct 15 12:41 -00
"unit_utils" time elapsed: 00:00:00
----------------------------------------------------------
6/7 Testing: unit_version
6/7 Test: unit_version
Command: "/var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008_build/tests/catch/test_version"
Directory: /var/tmp/portage/sci-mathematics/netgen-6.2.2008/work/netgen-6.2.2008_build/tests/catch
"unit_version" start time: Oct 15 12:41 -00
Output:
----------------------------------------------------------
===============================================================================
All tests passed (7 assertions in 1 test case)
<end of output>
Test time = 0.00 sec
----------------------------------------------------------
Test Passed.
"unit_version" end time: Oct 15 12:41 -00
"unit_version" time elapsed: 00:00:00
----------------------------------------------------------
I do have C++ catch installed so I am not sure what is going wrong here.
Thanks,
Aisha
CMake Error at C:/Users/hans_/Miniconda3/conda-bld/smesh_1522265382286/_b_env/Library/cmake/NetgenConfig.cmake:62 (set):
Syntax error in cmake code at
C:/Users/hans_/Miniconda3/conda-bld/smesh_1522265382286/_b_env/Library/cmake/NetgenConfig.cmake:62
when parsing string
C:\Users\hans_\Miniconda3\conda-bld\netgen_1522263755358\_b_env\Library\include\netgen
Invalid escape sequence \U
Call Stack (most recent call first):
CMakeLists.txt:118 (find_package)
I can't compile smesh on osx, because of these kind of errors. The errors are caused by header files in netgen. Somehow it's working on linux (no idea why). Also compiling netgen works on osx. So I wonder if there is the need to set some flags to get this working...
The build can be found here: https://circleci.com/gh/conda-forge/smesh-feedstock/86?utm_campaign=vcs-integration-link&utm_medium=referral&utm_source=github-build-link
Currently if one wants to meshing a opencascade TopoDS_Face, the boudnary wires should be meshed firstly, and passing the mesh nodes into netgen::Mesh object which is what occgenmesh.cpp::OCCFindEdges() does exactly.
But I consider the meshing of boundary wire is not neccessary if the user provides a closed loop of meshed nodes, and then we can project the node on to the TopoDS_Face to form a closed edge loop on UV plane. This offers the same data as OCCFindEdges() do .
So my question is that will the second way above succeed in netgen?
In libsrc/core/utils.hpp, x86intrin.h is included on all non-windows systems which breaks building on other arches, names ppc64le, s390x, and arm.
Perhaps a solution as adviced here would work, but my understanding an alternative to the instric will need to be provided.
Procedure to build static libraries are not clear, I don't see them in cmake options. A brief description on the steps would be helpful.
Hi, I want to merge/combine some cylinders in netgen.csg
, where 1 big cylinder is the domain to be investigated and two small cylinders are electrodes (voltage/current boundaries). I specify the bcs on the top surface of a cylinder primitive. However, the bc will be erroneous merged. Here is a minimal example that recreates this problem. Moreover, the material properties of the small cylinders (electrodes) are also merged, which can be seen in mesh.GetMaterials()
.
Can I preserve the bc
and mat
of the small shapes when using +
in netgen.csg
?
https://github.com/liubenyuan/netgen-note/blob/master/examples/csg_issue_bc_cyl.py
At line 78, if you comment this line p0[0] += 0.01
, the bc="e1"
will be removed, if uncomment this line, bc="e1"
will be visible. The material properties of electrodes (which should be 'agcl') is gone, where only 'g0' is preserved.
import numpy as np
from netgen import csg
from ngsolve.comp import Mesh
def cylinder(p0, p1, unit_vec, r, bc="bc"):
""" a pointed cylinder (numpy interface) """
# generate CSG primitives
csg_p0 = csg.Pnt(p0[0], p0[1], p0[2])
csg_p1 = csg.Pnt(p1[0], p1[1], p1[2])
csg_vec = csg.Vec(unit_vec[0], unit_vec[1], unit_vec[2])
# generate cylinder shape
bot = csg.Plane(csg_p0, -csg_vec)
top = csg.Plane(csg_p1, csg_vec)
cy_surface = csg.Cylinder(csg_p0, csg_p1, r)
# specify bc on top
top.bc(bc)
# geo
cy = top * cy_surface * bot
return cy
def unit_cylinder(h=1.0, r=0.5, bc="cyl"):
""" scaled unit z-axis cylinder """
p0 = [0, 0, 0]
p1 = [0, 0, h]
unit_vec = [0, 0, 1]
return cylinder(p0, p1, unit_vec, r, bc)
def electrode_cylinder(p0=[0, 0, 0], unit_vec=[1, 0, 0], shape=[0.1, 0.1],
bc="e0"):
"""
cylinder electrode (numpy interface)
shape: NDArray
[radius, thickness]
"""
r, thick = shape
# calculate the center of the other face
p1 = np.asarray(p0) + thick * np.asarray(unit_vec)
# generate cylinder electrode with annotation
ele = cylinder(p0, p1, unit_vec, r, bc)
ele.mat('agcl')
return ele
def cylinder_with_electrodes():
""" [test only, will be deleted] """
h = 1.0
r = 0.5
g0 = unit_cylinder(h=h, r=r)
g0.mat('g0')
# generate cylinder electrode
ele_shape = [0.1, 0.1] # radius, thick
thick = ele_shape[1]
ele_pos = [30, h/2.0] # angle (degree), z
# infer locations
rad = ele_pos[0] * 2 * np.pi / 360.0
unit_vec = np.array([np.cos(rad), np.sin(rad), 0])
# warning: a thin contact of electrode with domain will cause
# netgen failed to generate proper mesh
p0 = (r - thick/2.0)*unit_vec
p0[2] = ele_pos[1]
# place 1st electrode
ele = electrode_cylinder(p0, unit_vec, shape=ele_shape, bc="e0")
geo = g0 + ele
# place 2nd electrode
p0[2] += 0.25
p0[0] += 0.01 # <-- https://github.com/NGSolve/netgen/issues/49
ele2 = electrode_cylinder(p0, unit_vec, shape=ele_shape, bc="e1")
geo = geo + ele2
return geo
if __name__ == "__main__":
g = cylinder_with_electrodes()
geo = csg.CSGeometry()
geo.Add(g)
ngmesh = geo.GenerateMesh(maxh=0.1)
mesh = Mesh(ngmesh)
# mesh.Curve(3)
print(mesh.GetBoundaries())
print(mesh.GetMaterials())
Hi,
I am using netgen to load a step file. (nglib::Ng_OCC_Load_STEP)
at the end of my function, I am deleting the existing netgen object using
nglib::Ng_OCC_DeleteGeometry(ng_geom);
nglib::Ng_DeleteMesh(mesh)
I am getting a crash during the following call Ng_DeleteMesh
// Now delete the Mesh class itself
delete (Mesh*)mesh;
error is happening during the delete
meshclass object is causing a problem during its destruction. https://github.com/NGSolve/netgen/blob/master/libsrc/meshing/meshclass.cpp#L82
ubuntu 18.04
clang 6.0
netgen v6.2.1910
oce-dev 0.18.2-2build1 from ubuntu packages
Hi, I found that writing the CSG using Pnt and Vec is combersome, especially the geometric arithmetic is done using numpy.
For example,
def cylinder(p0, p1, unit_vec, r):
""" a pointed cylinder (numpy interface) """
# generate CSG
csg_p0 = csg.Pnt(p0[0], p0[1], p0[2])
csg_p1 = csg.Pnt(p1[0], p1[1], p1[2])
csg_vec = csg.Vec(unit_vec[0], unit_vec[1], unit_vec[2])
# generate shape
bot = csg.Plane(csg_p0, -csg_vec)
top = csg.Plane(csg_p1, csg_vec)
cy_surface = csg.Cylinder(csg_p0, csg_p1, r)
cy = top * cy_surface * bot
return cy
It would be much better if Pnt and Vec accept a numpy input, for example,
p0 = np.array([0, 0, 0])
v0 = np.array([0, 0, 1])
dist = 0.2
p1 = p0 + dist * v0
csg_p0 = csg.Pnt(p0)
csg_p1 = csg.Pnt(p1)
csg_vec = csg.Vec(v0)
BTW, will netgen support Pnt and Vec arithmetic? i.e., the following code yield an error.
p0 = csg.Pnt(0, 0, 0)
vec = csg.Vec(0, 0, 1)
p1 = p0 + vec*0.2
Hi,
Can i use Netgen to do boolean operators between 3D volumetric mesh?
For example, I want to take a mesh file of a full cube, and create a thin shell of the cube (subtract the inside of the cube).
Afterwards i want to add the inside of the cube but I want to change it's geometry, so it won't be a full solid but will have holes.
This boolean operation can be performed using STLs, i know, but I want to perform it on the volumetric mesh files.
Can Netgen do it?
Hi Team NETGEN
I've been trying to build the library for a while, in vain.
I installed/uninstall/reinstall the required libraries but still get some linking errors:
/*
In function Ng_Init': /fem/netgen/ng/ngpkg.cpp:3440: undefined reference to
Togl_CreateFunc'
/fem/netgen/ng/ngpkg.cpp:3441: undefined reference to Togl_DestroyFunc' /fem/netgen/ng/ngpkg.cpp:3442: undefined reference to
Togl_DisplayFunc'
/fem/netgen/ng/ngpkg.cpp:3443: undefined reference to Togl_ReshapeFunc' /fem/netgen/ng/ngpkg.cpp:3445: undefined reference to
Togl_CreateCommand'
/fem/netgen/ng/ngpkg.cpp:3446: undefined reference to `Togl_CreateCommand'
*/
Please, can someone tell me what i am missing here.
Ps: Also, I'd like to build the library without Python if possible.
Mysystem= ubuntu LTS18.04
All the best,
zaq
My system environment is as follows:
centos7.6
gcc7.5.0
python3.7
I successfully compiled and ran netgen,But I found that there was no way to output mesh files.
Error message is:
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Export mesh to file /home/dfm/netgen/example/s.mesh, format is Neutral Format (.mesh)
ERROR: Sorry, nothing known about file format Neutral Format (.mesh)
errinfo: Sorry, nothing known about file format Neutral Format (*.mesh)
while executing
"Ng_ExportMesh $file $exportfiletype"
invoked from within
".#ngmenu.#ngmenu#file invoke active"
("uplevel" body line 1)
invoked from within
"uplevel #0 [list $w invoke active]"
(procedure "tk::MenuInvoke" line 50)
invoked from within
"tk::MenuInvoke .#ngmenu.#ngmenu#file 1"
(command bound to event)
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
I look forward to your help
According to the Releases page on the homepage, the monthly releases should be available as tags in the git repo:
Additionally you can check out the monthly versions on git by checking out the tag of the version (e.g v6.2.1704)
However git tag -l
only shows v6.2-dev
, and trying e.g. git checkout v6.2.1704
doesn't work (as you'd expect based on git tag -l
.) I am wanting to package netgen for Debian (and ultimately the FreeCAD project which depends on netgen) and it would be helpful if these tags were available.
I currently have the problem that the environment variable NGS_NUM_THREADS is not respected when running netgen:
> export NGS_NUM_THREADS=1
> netgen -geofile=/usr/share/netgen/torus.geo -meshfile=out.mesh -batchmode
NETGEN-6.2-dev
Developed by Joachim Schoeberl at
2010-xxxx Vienna University of Technology
2006-2010 RWTH Aachen University
1996-2006 Johannes Kepler University Linz
Including OpenCascade geometry kernel
optfile ./ng.opt does not exist - using default values
togl-version : 2
no OpenGL
OCC module loaded
Load CSG geometry file /usr/share/netgen/torus.geo
Calc Triangle Approximation
Object 0 has 882 triangles
[...]
task-based parallelization (C++11 threads) using 4 threads
[...]
task-based parallelization (C++11 threads) using 4 threads
[...]
Am I missing something out? Thanks!
Hi,
Is netgen capable of generating incremental meshes on existing tetrahedron meshes? I want to add some electrode patch on a cylinder (which is a simple binary, existing tetrahedron mesh).
Benyuan
I want to perform surface meshing on sheets. But in the netgen GUI, when a sheet file is loaded, it doesn't load because in a sheet the boundary triangles have only 2 neighbours. I looked into the C++ API and found the following functions:
But they create 2D mesh with only x and y coordinates.
There is Ng_Geometry_2D which is used to expose SplineGeometry2d, but I wasn't sure if this is the data structure for what I wanted to do.
Could you please let me know which data structure and meshing function could be used to perform surface meshing on sheets?
Upon startup I get the following error:
NETGEN-6.2-dev
Developed by Joachim Schoeberl at
2010-xxxx Vienna University of Technology
2006-2010 RWTH Aachen University
1996-2006 Johannes Kepler University Linz
Including OpenCascade geometry kernel
optfile ./ng.opt does not exist - using default values
togl-version : 2
Unable to create temporary OpenGL window
no OpenGL
OCC module loaded
I have traced this error to the following code in Togl:
wnd = CreateWindow(ClassName, "test OpenGL capabilities",
WS_OVERLAPPEDWINDOW | WS_CLIPSIBLINGS | WS_CLIPCHILDREN,
0, 0, 1, 1, parent, NULL, instance, NULL);
if (wnd == NULL) {
fprintf(stderr, "Unable to create temporary OpenGL window\n");
return NULL;
}
All other OpenGL applications running fine (OCE, VTK, Python...) this is is specific to netgen package.
Compiled using latest MSYS2/MinGW64 on Windows 10 64 bit, GTX 1060 OpenGL Card.
Thank you.
netgen --version
terminate called after throwing an instance of 'std::invalid_argument'
what(): stoi
the software stack is built with gcc 9.3.0.
The latest stable version is 6.2.2006 does not show this issue.
There are few meshing parameters to control the mesh generated. Is there any parameter or parameter computation logic to predict/set the number of cells to be generated?
It would be suffice to approximately predict number of cells for given parameters.
Thanks
Vishnu C
"http://www.asc.tuwien.ac.at/~mhochsteger/ngsuite/lapack64.zip" this link in SuperBuild.cmake is unreachable. There are any alternative way to solve this problem?
I think a Point3D object, and a Point2D object is enough.
you defined Point template, and Point3d object, seems a little redundant.
And, why some array objects' index start from 1, and some start from 0? can they both start from 0? It's a little confusing.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.