Comments (15)
I can tell you that I'm just under 120k files queued for DL (I'm also going to add Feature Requests for Total # of Files & Total MB/GB/TB queued). Current max files queued from a single user is just over 50k. Performance, once fully launched, seems to be pretty good :-) I did note that there is a bit of a delay when adding files from Browsing a User's list and switching over to the DOWNLOAD tab - it takes a second or 2 for the selected files to appear in the list. That said, I wouldn't consider this to be a significant issue in the least, and it would seem that it might even improve, if not be eliminated, when the GTK issue has been resolved.
from nicotine-plus.
Dropping back to the 06-NOV build, I noticed that it also causes the same type of freezing/pausing of the OS, but not to the extent that the 25-NOV build does.
from nicotine-plus.
Have not noticed this on my end. Anything going on in the Windows task manager when the freezes happen?
from nicotine-plus.
I can't tell, because Windows is completely non-responsive.
from nicotine-plus.
I dropped back to the 06-NOV build I was previously using, and while this IS still present as the program launches, it is not as severe as the current version. I don't know if this might have something to do with the size of one share, the number of shares, or the number of users/files queued for download - or a combination of any of them. Additionally, I did not notice the connection dropping as frequently.
from nicotine-plus.
Could you try the builds below? Scroll down on the pages for download links. Please try all the builds until the freezes start happening, so we can pinpoint the issue.
November 10: https://github.com/nicotine-plus/nicotine-plus/actions/runs/6828995603
November 13: https://github.com/nicotine-plus/nicotine-plus/actions/runs/6846354280
November 17: https://github.com/nicotine-plus/nicotine-plus/actions/runs/6903803045
November 18: https://github.com/nicotine-plus/nicotine-plus/actions/runs/6915101473
November 24: https://github.com/nicotine-plus/nicotine-plus/actions/runs/6984482548
November 25: https://github.com/nicotine-plus/nicotine-plus/actions/runs/6986389035
from nicotine-plus.
I'll give each one a try as I can and update :-)
I had the 17 & 18 builds, but never installed them, and the build for the 25th is an earlier one than the one I had the problems with.
from nicotine-plus.
@mathiascode - just a suggestion, but maybe add the BUILD# &/or Date to the ABOUT info as well? :-)
from nicotine-plus.
Just installed the 30-NOV build and while there IS still some freezing during launch, it is not nearly as bad as previously. Will update on the status of the disconnects and any other issues after a while :-)
from nicotine-plus.
Just installed the 30-NOV build and while there IS still some freezing during launch, it is not nearly as bad as previously. Will update on the status of the disconnects and any other issues after a while :-)
That's good to hear. Would you say it's back on the same level as the November 6 build?
Now if I could figure out #2745...
just a suggestion, but maybe add the BUILD# &/or Date to the ABOUT info as well? :-)
It would be nice to have this eventually, but it isn't trivial to add it to all the development builds on different platforms.
from nicotine-plus.
Also, does the freezing on startup happen if the downloads tab isn't the default one selected (i.e. the list in the GUI isn't populated yet)?
from nicotine-plus.
Yes, it is about the same as the 06-NOV build - I do not know if it is worse with a different tab, as I usually start up on the default DOWNLOADS tab to begin with.
Understandable on the Build details - I wasn't sure whether there might be a way to auto-populate those values. Just a thought :-)
from nicotine-plus.
Yes, it is about the same as the 06-NOV build
Nice :)
I do not know if it is worse with a different tab, as I usually start up on the default DOWNLOADS tab to begin with.
Could you check when you have the opportunity? Would be nice to know if the performance of the backend is fine at this point. The treeviews in the GUI have performance issues when appending a lot of rows at once, not much that can be done until they are ported to the newer Gtk.ColumnView widget.
from nicotine-plus.
Closing, since the issue seems to be resolved.
from nicotine-plus.
@mathiascode - I will post an update with the latest build :-)
--- DS
from nicotine-plus.
Related Issues (20)
- Scrolling performance suddenly abysmal (again) HOT 6
- Can't access "Format Codes" link in settings through left mouse click on 3.3.3 HOT 1
- Sometimes, Nicotine+ (3.3.3) window doesn't open on top when other windows already opened full screen on the desktop. HOT 9
- Config search HOT 2
- Nicotine won't connect HOT 4
- Autoclear finished/filtered downloads from transfer list option doesn't work HOT 2
- Nicotine+ refuses to start after installing latest version; "bad magic number" HOT 2
- Add timestamp columns to Uploads and Downloads views HOT 1
- Context menu clicks don't work on macOS Ventura HOT 11
- Cant connect to server? HOT 2
- Crash on Mac OS Monterey 12.7.5 (Intel) - Nicotine+ Version: 3.3.5.dev1 HOT 6
- Crash on load, Nicotine+ 3.3.4 mingw x86_64 (Fixed) HOT 6
- Remove/clear HOT 5
- "Ok" on Network Closes Port HOT 2
- Python Memory Error HOT 14
- Manually "lock" specific queued downloads from being accidentally cleared HOT 2
- set final destination folder upon completion of download, instead of when download is requested - or - allow user to change to download folder for existing/pending downloads HOT 7
- Crash on start on Kubuntu 24.04 HOT 4
- Better bandwidth distribution when transfer speed limits are enabled HOT 3
- Libadwaita theme not applying HOT 5
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from nicotine-plus.