Nx console not working on M1 chips

[CesarGPX]

Nx console not working on M1 chips

[CesarGPX]

Hi Max, Thank you for your answer. Indeed, it was the system version installed that was conflicting. After uninstalling it it works fine. Thanks again for your help, Cesar

…

On Mon, 18 Mar 2024 at 09:33, MaxKless ***@***.***> wrote: Hey thanks for reporting this @CesarGPX <https://github.com/CesarGPX>. It looks to me like a misconfiguration with your node environment? You probably have a weird node version installed via homebrew or similar and then nvm on top of that? Can you double check that the nxConsole.showNodeVersionOnStartup setting is enabled and look at the node version being loaded by VSCode? Is it the same as the noder version in your terminal? There are a couple of options that might fix this. Please let me know if/which of these worked: - Go to your default terminal (not iTerm) and change the node version there using nvm. VSCode should pick up the correct one - Run nvm list and see if you have a system version installed there? If so, make sure to remove that version (using rm -rf /usr/local/bin/node). You've probably installed it using brew at some point and it might interfere with the nvm version. - Run nvm use system which should fix the same problem. I haven't tried this one yet personally when I've run into it but it worked for some ppl. Thanks to @TomWhiteIMO <https://github.com/TomWhiteIMO> for this solution. — Reply to this email directly, view it on GitHub <#2059 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AYOECG4EZVS6KYY2TVVTEHLYY2YH5AVCNFSM6AAAAABE3GOK5SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBTGMZTCNJVGM> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[MaxKless]

Hey thanks for reporting this @CesarGPX. It looks to me like a misconfiguration with your node environment? You probably have a weird node version installed via homebrew or similar and then nvm on top of that?
Can you double check that the nxConsole.showNodeVersionOnStartup setting is enabled and look at the node version being loaded by VSCode? Is it the same as the noder version in your terminal?

There are a couple of options that might fix this. Please let me know if/which of these worked:

• Go to your default terminal (not iTerm) and change the node version there using nvm. VSCode should pick up the correct one
• Run nvm list and see if you have a system version installed there? If so, make sure to remove that version (using rm -rf /usr/local/bin/node). You've probably installed it using brew at some point and it might interfere with the nvm version.
• Run nvm use system which should fix the same problem. I haven't tried this one yet personally when I've run into it but it worked for some ppl.