generateifrequired not regenerating traffic items

[openixia]

generateifrequired not regenerating traffic items

[therkong]

Traffic generate will update the traffic with learned info from the protocols. For example, it will fill in the dest mac addresses learned from the ARP Request/Reply done when the protocol is started. “generate” is per traffic item. You need to do a loop and generate on each traffic item. In step 3, please pass in the traffic item in arg 1: {'json': {'arg1': '/api/v1/sessions/1/ixnetwork/traffic/1'}}. Regards, Theresa Kong Senior Tech Support Engineer Keysight Technologies From: pw <[email protected]> Sent: Monday, June 24, 2019 2:47 AM To: OpenIxia/IxNetwork <[email protected]> Cc: Subscribed <[email protected]> Subject: [OpenIxia/IxNetwork] generateifrequired not regenerating traffic items (#66) [EXTERNAL] What is .../ixnetwork/traffic/operations/generateifrequired supposed to do ? I know it should regenerate "dirty" traffic but what does it mean exactly ? Does it recognize NexGen protocols ? My case is like follows: 1. I load config. It has some NexGen protocols and traffic items between them configured 2. I start all protocols 3. When protocols are up I do: post - http://10.10.0.222:11019/api/v1/sessions/1/ixnetwork/traffic/operations/generateifrequired<https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2F10.10.0.222%3A11019%2Fapi%2Fv1%2Fsessions%2F1%2Fixnetwork%2Ftraffic%2Foperations%2Fgenerateifrequired&data=02%7C01%7C%7Ca437b6231f0c442b003e08d6f888f551%7C63545f2732324d74a44dcdd457063402%7C1%7C0%7C636969664467940061&sdata=J92bvtfqHjJ5JWgozZfZ%2B%2B5kXB%2BQZ%2FmP5UbvZGdQUzg%3D&reserved=0> - {'json': {'arg1': '/api/v1/sessions/1/ixnetwork/traffic'}} and get 202 success 4. I apply and start traffic but traffic fails (100% loss). If I go to API browser and generate each traffic item one by one using ixnetwork/traffic/trafficItem//operations/generate and then apply and run traffic it works fine (0% loss) Best Regards, PW — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub<https://nam05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FOpenIxia%2FIxNetwork%2Fissues%2F66%3Femail_source%3Dnotifications%26email_token%3DAIRRUUJO5UW2FS5NSUWQGBDP4CJ2VA5CNFSM4H244OT2YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4G3H5IJA&data=02%7C01%7C%7Ca437b6231f0c442b003e08d6f888f551%7C63545f2732324d74a44dcdd457063402%7C1%7C0%7C636969664467950074&sdata=l%2BNNCSeKDozoyf6QCPADrfB1t0UdkX8w1XpsoqxsW8o%3D&reserved=0>, or mute the thread<https://nam05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAIRRUUJK466555WYRULL5ITP4CJ2VANCNFSM4H244OTQ&data=02%7C01%7C%7Ca437b6231f0c442b003e08d6f888f551%7C63545f2732324d74a44dcdd457063402%7C1%7C0%7C636969664467960078&sdata=GAyvlMCFZ0U%2FH1Ho3E3XM5PawZSSrp0%2BOFYs%2BIf8j8s%3D&reserved=0>.

[pwlodawi]

API browser shows that generateifrequired doesn't accept traffic item as parameter.
Shouldn't generateifrequired generate all traffic items if needed ?

[therkong]

Yes, I see that generateifRequierd() is for traffic level.
dirty traffic means the traffic item was marked as Regenerate Required (for example, when editing some traffic option that requires traffic to be regenerated in order to take effect). However, traffic item is detected as regenerate required in a subset of cases only, not for all possible cases. It will not catch cases when user makes protocol changes that might impact traffic for example.
You should do generate() on traffic item in order to ensure the learned info fields from the protocols are propagated to traffic items.

[pwlodawi]

Ok. I see it's better to forget about generateifrequired and simply loop through traffic items and call generate on each one.