Provide "Hardware" Advice for Mounting Solutions

[commonsguy]

Provide "Hardware" Advice for Mounting Solutions

[sorccu]

Hi,

Thanks for the feedback. We're going to open source our shelf design
shortly!

On Thursday, July 2, 2015, Mark Murphy [email protected] wrote:

The documentation in your README for relevant hardware is excellent! You
might consider adding another section, with advice on the physical setup of
the device farm.

For example: what exactly is shown in the photo at the top of the README,
with the aluminum(?) slats holding the devices? My initial reaction was a
rackmount system, but I would think that we would see holes in the vertical
supports, and such holes do not appear in the photo.

—
Reply to this email directly or view it on GitHub
#1.

[googledesign]

Tks for your help

[joaopedroms22]

Hi @sorccu ,

There are some news about this topic or when will be released?

Regards

[sorccu]

Sorry, we have no time to clean up the design for release. Furthermore, we
are targeting different hardware now, requiring a different design.

On Monday, 20 June 2016, joaopedroms22 [email protected] wrote:

Hi @sorccu https://github.com/sorccu ,

There are some news about this topic or when will be released?

Regards

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
#1 (comment), or mute
the thread
https://github.com/notifications/unsubscribe/AAB-_QmupwLIkMeecP9iTIMGhQk5c02fks5qNm-bgaJpZM4FQlK2
.

[joaopedroms22]

Ok, thanks for you anwser.

[joaopedroms22]

hi @sorccu,

Can you send to me more pics from your shelf?
I want to build a similar , but with the photos who are on your site is complicated to see the details of it.
How is that cell phones are stuck in the support?

Regards