Comments (8)
Can you run adb shell getprop | grep ro.product
and paste the output? There shouldn't be any private information there.
from stf.
Hi, there's the output
[root@localhost ]# adb shell getprop | grep ro.product
[ro.product.board]: [neken NX]
[ro.product.device]: [neken NX]
[ro.product.model]: [neken NX]
[ro.product.name]: [neken NX]
it is wired , why github only shows four line
from stf.
i got these message from logcat , does it help?
Error 10:45:46.209 158 298 IMGSRV :0: gralloc_module_map: Cannot map buffer ID=130 before register (0x0)
Error 10:45:46.209 158 298 IMGSRV :0: MapBufferObtainParams: Mapping buffer failed
Error 10:45:46.209 158 298 IMGSRV :0: WSEGL_GetDrawableParameters: Failed to obtain buffer parameters
Error 10:45:46.209 158 298 IMGSRV :0: KEGLRecreateDrawable: Couldn't create a drawable
Error 10:45:46.209 158 298 IMGSRV :0: KEGLGetDrawableParameters: Can't recreate drawable
Error 10:45:46.209 158 298 IMGSRV :0: GLESMakeCurrentGC: Invalid drawable - what do we do?
Error 10:45:46.209 158 298 IMGSRV :0: gralloc_module_map: Cannot map buffer ID=130 before register (0x0)
Error 10:45:46.209 158 298 IMGSRV :0: MapBufferObtainParams: Mapping buffer failed
Error 10:45:46.209 158 298 IMGSRV :0: WSEGL_GetDrawableParameters: Failed to obtain buffer parameters
Error 10:45:46.209 158 298 IMGSRV :0: KEGLRecreateDrawable: Couldn't create a drawable
Error 10:45:46.209 158 298 IMGSRV :0: KEGLGetDrawableParameters: Can't recreate drawable
Error 10:46:00.105 158 298 IMGSRV :0: gralloc_module_map: Cannot map buffer ID=130 before register (0x0)
Error 10:46:00.105 158 298 IMGSRV :0: MapBufferObtainParams: Mapping buffer failed
Error 10:46:00.105 158 298 IMGSRV :0: WSEGL_GetDrawableParameters: Failed to obtain buffer parameters
Error 10:46:00.105 158 298 IMGSRV :0: KEGLRecreateDrawable: Couldn't create a drawable
Error 10:46:00.105 158 298 IMGSRV :0: KEGLGetDrawableParameters: Can't recreate drawable
Error 10:46:00.105 158 298 IMGSRV :0: GLESMakeCurrentGC: Invalid drawable - what do we do?
Error 10:46:00.106 158 298 IMGSRV :0: gralloc_module_map: Cannot map buffer ID=130 before register (0x0)
Error 10:46:00.106 158 298 IMGSRV :0: MapBufferObtainParams: Mapping buffer failed
Error 10:46:00.106 158 298 IMGSRV :0: WSEGL_GetDrawableParameters: Failed to obtain buffer parameters
Error 10:46:00.106 158 298 IMGSRV :0: KEGLRecreateDrawable: Couldn't create a drawable
Error 10:46:00.106 158 298 IMGSRV :0: KEGLGetDrawableParameters: Can't recreate drawable
Error 10:46:00.244 158 298 IMGSRV :0: MapBufferObtainParams: Mapping buffer failed
Error 10:46:00.244 158 298 IMGSRV :0: gralloc_module_map: Cannot map buffer ID=130 before register (0x0)
Error 10:46:00.244 158 298 IMGSRV :0: WSEGL_GetDrawableParameters: Failed to obtain buffer parameters
Error 10:46:00.244 158 298 IMGSRV :0: KEGLRecreateDrawable: Couldn't create a drawable
Error 10:46:00.244 158 298 IMGSRV :0: KEGLGetDrawableParameters: Can't recreate drawable
Error 10:46:00.244 158 298 IMGSRV :0: GLESMakeCurrentGC: Invalid drawable - what do we do?
Error 10:46:00.244 158 298 IMGSRV :0: gralloc_module_map: Cannot map buffer ID=130 before register (0x0)
Error 10:46:00.244 158 298 IMGSRV :0: MapBufferObtainParams: Mapping buffer failed
Error 10:46:00.244 158 298 IMGSRV :0: WSEGL_GetDrawableParameters: Failed to obtain buffer parameters
Error 10:46:00.244 158 298 IMGSRV :0: KEGLRecreateDrawable: Couldn't create a drawable
Error 10:46:00.244 158 298 IMGSRV :0: KEGLGetDrawableParameters: Can't recreate drawable
Error 10:46:00.283 158 298 IMGSRV :0: gralloc_module_map: Cannot map buffer ID=130 before register (0x0)
Error 10:46:00.283 158 298 IMGSRV :0: WSEGL_GetDrawableParameters: Failed to obtain buffer parameters
Error 10:46:00.283 158 298 IMGSRV :0: MapBufferObtainParams: Mapping buffer failed
Error 10:46:00.283 158 298 IMGSRV :0: KEGLGetDrawableParameters: Can't recreate drawable
Error 10:46:00.283 158 298 IMGSRV :0: KEGLRecreateDrawable: Couldn't create a drawable
Error 10:46:00.283 158 298 IMGSRV :0: GLESMakeCurrentGC: Invalid drawable - what do we do?
Error 10:46:00.283 158 298 IMGSRV :0: gralloc_module_map: Cannot map buffer ID=130 before register (0x0)
Error 10:46:00.283 158 298 IMGSRV :0: WSEGL_GetDrawableParameters: Failed to obtain buffer parameters
Error 10:46:00.283 158 298 IMGSRV :0: MapBufferObtainParams: Mapping buffer failed
Error 10:46:00.283 158 298 IMGSRV :0: KEGLRecreateDrawable: Couldn't create a drawable
Error 10:46:00.283 158 298 IMGSRV :0: KEGLGetDrawableParameters: Can't recreate drawable
from stf.
Unfortunately we don't have any Neken devices to test with (I actually learned that the maker exists from your post ), so I might not be able to help right now.
from stf.
We have a Lenovo Yoga Tablet 8 that exhibits the same behavior, it's our only device that does that. I'll try to look at it at some point.
from stf.
ok , if it is the same behavior , maybe it is the same reason , and if you want me to do something , just mail me at [email protected] , i will try my best to help . thank you !
from stf.
Hello, @sorccu, @channingbreeze
I faced exactly the same issue with HUAWEI U8825-1, so I am very interested in solving this issue too, I will follow this thread, and I am ready to post some debug info if needed
from stf.
There's a good chance that this was fixed by STF 2.3.0. Please try and report back with your findings. @rseek I am not sure about HUAWEI U8825-1, please create a new issue for it if the problem still exists, and remember to post the log output there. Thanks!
from stf.
Related Issues (20)
- mac M1 Expected in: flat namespace
- STF- Throwing timeout after sometime HOT 1
- dyld: lazy symbol binding failed: Symbol not found: __ZN2v87Isolate37AdjustAmountOfExternalAllocatedMemoryEx HOT 2
- 远程连接手机出现Device was kicked by automatic timeout HOT 2
- Screenshots and files will not be uploaded. HOT 9
- Don't see available devices when create new group
- Why root admin is only able to see the main default froup ? is there a way to make other admin to see default group ?
- The memory used by nodes is increasing
- stf 3.6.4 not detecting devices
- Unable to install STF due to gyp ERR! configure error
- If I use password autofill feature of the STF page, the autofill dialog is displayed when I click on the device screen area.
- None
- Add "About" section to the UI
- Unexpected error checking ProtoBuf: TypeError: Invalid Version: 23.4 HOT 1
- Mac M1 stf disconnected missing symbol called HOT 1
- The device is not detecting when stf local is run through ip address
- Problem Auth System autorization
- mac openstf and ldap auth fail (Authentication Failure for "test account"
- How to set up to login by password/SSO?
- Setup had an error PrematureEOFError: Premature end of stream, needed 1 more bytes
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from stf.