Add example config for relay and hybrid mode(s)

[openwrt]

Add example config for relay and hybrid mode(s)

[murilopontes]

Try this configuration

cat /etc/config/dhcp

config dnsmasq
option domainneeded '1'
option boguspriv '1'
option localise_queries '1'
option rebind_protection '1'
option rebind_localhost '1'
option local '/lan/'
option domain 'lan'
option expandhosts '1'
option authoritative '1'
option readethers '1'
option leasefile '/tmp/dhcp.leases'
option resolvfile '/tmp/resolv.conf.auto'
option localservice '0'

config dhcp 'lan'
option interface 'lan'
option start '100'
option limit '150'
option leasetime '12h'
option ra 'relay'
option dhcpv6 'relay'
option ndp 'relay'

config dhcp 'wan6'
option master '1'
option interface 'wan'
option ra 'relay'
option ndp 'relay'
option dhcpvp6 'relay'

[azrdev]

@murix I got IPv6 addresses that were routable (at least after ping6ing my routers' external IPv6), with the following options (by hand, luci missed something, iirc the master option):

config dhcp 'lan'
        option ra 'relay'
        option dhcpv6 'relay'
        option ndp 'relay'
config dhcp 'wan6'
        option master '1'
        option interface 'wan'
        option ra 'relay'
        option ndp 'relay'
        option dhcpv6 'relay'

Using hybrid in place of relay still gives me addresses, but those are not routable anymore.

---

Please extend the documentation on the relay feature! Currently debugging what's going on is very hard, if not impossible.