Comments (9)
Just tried accessing my my remote camera data that is 3000 km away and gdrive web shows the latest files. 404 error indicates host not found. I tried the DNS entry you gave above and it does fail with a 404 error. My gdrive browser url is similar to this https://drive.google.com/drive/u/0/ It does not have host entry in the URL anywhere..
I suggest you try upgrading pi-timolo per instructions here https://github.com/pageauc/pi-timolo/wiki/How-to-Install-or-Upgrade
Try setting up security token again per wiki here. https://github.com/pageauc/pi-timolo/wiki/How-to-Setup-pi-timolo-gdrive-sync
I just did the steps above on a fresh Raspbian Jessie Pi 3 and it worked with NO problem. So try repeating the setup and let me know what the status is. My remote machine is an older Raspbian build on an older original RPI so version does not seem to be an issue. Also are you trying to use sync.sh? If not then provide the push command you are trying.
Claude ..
from pi-timolo.
Hello thank you for your quick response. I did both of the steps suggested, it seemed to update without any errors, I did the security token again and it worked without errors. But unfortunately it seems it isn't helping.
I did bump into this thread under "odeke-em/drive", I'm not sure how similar drive and gdrive are, they seem identical, but for different versions of linux, correct me if I'm wrong. I am having the exact same problem that they are having odeke-em/drive#764 although I can't use the same solution that they are using. Thank you for your help.
-Peter
from pi-timolo.
I have updated pi-timolo gdrive to latest version 0.3.8.1 of drive_armv6 from https://github.com/odeke-em/drive/releases
I have tested pi-timolo sync.sh and it works OK although the older version also worked OK as well. You may wish to run pi-timolo install again per
https://github.com/pageauc/pi-timolo. Please note I call my version gdrive but it is the same version as on odeke-em github. More info on the wiki
https://github.com/pageauc/pi-timolo/wiki/How-to-Setup-pi-timolo-gdrive-sync
Let me know if this resolves your issue
from pi-timolo.
I have updated sync.sh to version 1.7 There were a few fix ups and a few bug fixes. I have tested and all seems well. Please let me know if you are still experiencing issues.
from pi-timolo.
Thank you for the update, the pull request works now. That seems to have fixed the problem! Thanks again.
from pi-timolo.
I have issued release 1.9 of sync.sh. This version has better error checking and will create a remote folder if one does not already exist. Not sure why remote folder is not automatically created since this worked in earlier versions of drive. At any rate this version should be better.
from pi-timolo.
I have updated pi-timolo gdrive to latest version 0.3.8.1 of gdrive_armv6
from https://github.com/odeke-em/drive/releases
I have tested pi-timolo sync.sh and it works OK although the older version
also worked OK as well. You may wish to run pi-timolo install again per
https://github.com/pageauc/pi-timolo. Please note I call my version gdrive
but it is the same version as on odeke-em github. More info on the wiki
https://github.com/pageauc/pi-timolo/wiki/How-to-Setup-pi-timolo-gdrive-sync
On Sat, Oct 22, 2016 at 5:08 AM, Claude Pageau [email protected] wrote:
gdrive 2.8 is just my name for the RPI version that was compiled by
odeke. Yes they are the same. Since I don't need all the latest features
my 2.8 version works OK for pi-timolo. There was a recent Internet Denial
of Service so maybe that might be part of the problem. Otherwise I cannot
recreate your problem on an older existing or new install. Let me know
status.
Claude ...On Fri, Oct 21, 2016 at 11:43 PM, cowk1ng [email protected]
wrote:Hello thank you for your quick response. I did both of the steps
suggested, it seemed to update without any errors, I did the security token
again and it worked without errors. But unfortunately it seems it isn't
helping.I did bump into this thread under "odeke-em/drive", I'm not sure how
similar drive and gdrive are, they seem identical, but for different
versions of linux, correct me if I'm wrong. I am having the exact same
problem that they are having odeke-em/drive#764
odeke-em/drive#764 although I can't use the
same solution that they are using. Thank you for your help.-Peter
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
#21 (comment),
or mute the thread
https://github.com/notifications/unsubscribe-auth/AFr1ZIMjhZMiS7B-fP4rE4E-848J8g8Gks5q2YZ_gaJpZM4Kdb7m
.See my YouTube Channel at http://www.youtube.com/user/pageaucp
See my YouTube Channel at http://www.youtube.com/user/pageaucp
from pi-timolo.
sync.sh ver 1.9 has been updated with better error checking. Check to see
if you have that version. It will automatically create a remote folder
based on the local one if it does not exist. I had to do this because the
previous version of gdrive worked differently than the new one.
Let me know if you have more issues. I have updated the wiki regarding
these changes. Also there is an drive_armv7 for Raspberry Pi 3 and B+ but
the armv6 works fine so I only used the armv6 version. This is also
mentioned in the wiki.
Claude ...
On Sat, Oct 22, 2016 at 9:11 AM, cowk1ng [email protected] wrote:
Thank you for the update, the pull request works now. That seems to have
fixed the problem! Thanks again.—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
#21 (comment),
or mute the thread
https://github.com/notifications/unsubscribe-auth/AFr1ZEpdIUcPM3dWq6TEVlBNHj0U883-ks5q2gt3gaJpZM4Kdb7m
.
See my YouTube Channel at http://www.youtube.com/user/pageaucp
from pi-timolo.
gdrive 2.8 is just my name for the RPI version that was compiled by odeke.
Yes they are the same. Since I don't need all the latest features my 2.8
version works OK for pi-timolo. There was a recent Internet Denial of
Service so maybe that might be part of the problem. Otherwise I cannot
recreate your problem on an older existing or new install. Let me know
status.
Claude ...
On Fri, Oct 21, 2016 at 11:43 PM, cowk1ng [email protected] wrote:
Hello thank you for your quick response. I did both of the steps
suggested, it seemed to update without any errors, I did the security token
again and it worked without errors. But unfortunately it seems it isn't
helping.I did bump into this thread under "odeke-em/drive", I'm not sure how
similar drive and gdrive are, they seem identical, but for different
versions of linux, correct me if I'm wrong. I am having the exact same
problem that they are having odeke-em/drive#764
odeke-em/drive#764 although I can't use the
same solution that they are using. Thank you for your help.-Peter
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
#21 (comment),
or mute the thread
https://github.com/notifications/unsubscribe-auth/AFr1ZIMjhZMiS7B-fP4rE4E-848J8g8Gks5q2YZ_gaJpZM4Kdb7m
.
See my YouTube Channel at http://www.youtube.com/user/pageaucp
from pi-timolo.
Related Issues (20)
- Can't start pi-timolo HOT 27
- Python3 compatibility HOT 4
- Filename given to user actions should include full path, instead of relative to pi-timolo HOT 1
- Change filename style HOT 1
- Daemon is crashing HOT 5
- Ideal settings for Raspberry Pi Camera V2 (8 Mega Pixels) for motion detection HOT 9
- Camera version is being detected as 1.13 even though I have Raspberry Pi Camera v2.1 HOT 10
- Motion tracked images stored in media folder are not high definition HOT 7
- Permission Denied on Startup HOT 3
- IMAGE_USE_VIDEOPORT config is not used HOT 7
- Suggested optimization for resize call when in quick pic mode HOT 1
- Low light video HOT 4
- Raspi IRcamera how to auto-change exposure time when light changes HOT 1
- Bullseye default python version HOT 5
- Update to Picamera2 for Raspbian Bullseye? HOT 7
- pi-timolo exits due to error HOT 4
- The pi-timolo.py does not executes user motion function, everything works somehow.
- MOTION_NUM_MAX = 0 is not continuous; Only records one video
- "pi" is no longer the standard user name on Raspberry PIs
- How to deal with memory issues and py3exiv2 install
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from pi-timolo.