Can't get it to work on WaveShare 2.13inch e-Paper HAT (B)

[pimoroni]

Can't get it to work on WaveShare 2.13inch e-Paper HAT (B)

[Gadgetoid]

I'm afraid this library is for Pimoroni Inky products, and we don't make, sell or support WaveShare boards so I'm totally clueless as to what might be going wrong in your case.

As far as I understand it should work, but a quick glance over Waveshare's documentation doesn't give me any clues as to which of our drivers are likely to be compatible and doesn't seem to specify which pins their board might use.

I think this is a different display driver part, but here's an example of a WaveShare board pinout: https://pinout.xyz/pinout/213_inch_e_paper_phat

Versus ours: https://pinout.xyz/pinout/inky_phat

[hakarune]

I'm afraid this library is for Pimoroni Inky products, and we don't make, sell or support WaveShare boards so I'm totally clueless as to what might be going wrong in your case.

As far as I understand it should work, but a quick glance over Waveshare's documentation doesn't give me any clues as to which of our drivers are likely to be compatible and doesn't seem to specify which pins their board might use.

I think this is a different display driver part, but here's an example of a WaveShare board pinout: https://pinout.xyz/pinout/213_inch_e_paper_phat

Versus ours: https://pinout.xyz/pinout/inky_phat

Oh, that is unfortunate, I was able to convert the nametag test to work with the waveshare board, but I'm still unable to draw images and after seeing this I was excited, but that is a shame. Back to the drawing board for me. thank you for the prompt reply.

[lvan188]

Is there a way to solve it?

[Gadgetoid]

Probably, if you've got a WaveShare board and the time to figure it out!

[lvan188]

也许，如果您有WaveShare板，并且有时间解决这个问题！

Can you solve it?

[Gadgetoid]

WaveShare provide complete instructions for using their boards on their Wiki - https://www.waveshare.com/wiki/2.13inch_e-Paper_HAT