lora image with sim800 ppp doesnt work

[krishnakulkarni88]

lora image with sim800 ppp doesnt work

[ryanteck]

We've had issues ourselves with the sim 800. We're working on a new version of the LoRa software with 4G support but believe this is only going to primarily support the EC-25 so can't really help to a certain extent.

Part of this is debian to blame as the 4G module Support isn't as good as Ubuntus. But really to a certain extent I can't support many more than the 4G module we'll be using.

[ryanteck]

Actually, we might be able to support the SIM7100 which i'm hoping will be similar to the sim800's config. But it'll be a good couple of weeks yet as progress with 4G has been tricky so far.

[ryanteck]

@krishnakulkarni88 do you have a link of the module add-on you are using?

[krishnakulkarni88]

Thanks for the reply, I am attaching my gateway module which I am using.
https://www.digikey.com/catalog/en/partgroup/iot-lora-gateway-hat-for-raspberry-pi-board/90535

[ryanteck]

Sorry, I meant what board for the LTE module.

…

On Wed, 20 May 2020, 06:46 krishnakulkarni88, ***@***.***> wrote: Thanks for the reply, I am attaching my gateway module which I am using. https://www.digikey.com/catalog/en/partgroup/iot-lora-gateway-hat-for-raspberry-pi-board/90535 — You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub <#73 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAINW2PW664ZLOFA67BYSELRSNVDJANCNFSM4NFJCOWQ> .

[krishnakulkarni88]

actually we are using 2g board, sim800
https://www.wish.com/product/sim800-gsm-gprs-module-shield-development-study-board-51-stm32-sim900a-5b4ba64e5df38d47cf0a4876?hide_login_modal=true

[ryanteck]

That one we won't be able to support I don't think as I assume you're using UART? We'll only be able to support a select set of USB ones.

[krishnakulkarni88]

ok, thank you for your time.
If I try to install this gateway setup manually in another rasbian os how can I do that? because I have tried a few methods by cloning ic880a repo and installing the sh file but it is not working. but your image starts to work immediately. May I know the procedure on how to install it manually. and also I have changed the pin number in sh file to 17th pin and enable spi still it doesn't work.

[ryanteck]

It sounds like you're using the wrong pin as it's not GPIO 17 and is instead GPIO 22 / BCM 22 number.

[krishnakulkarni88]

hey, thanks your solution worked, but as you said above ec25 works in Lora image. I tried connecting USB cable of ec25 dev kit and installed PPP. it is showing ip in ifconfig but when I do ping google.com it is giving me name resolution error

[ryanteck]

Sorry, I meant that in the next version we'll support EC25 out of the box among lots of other improvements. We may also be supporting the SIM7100 too at the same time in the new version. But currently neither are supported in the current image.