Keypad showing up as 2 devices

[Chioti]

Keypad showing up as 2 devices

[CompKingCanada]

I can't seem to exclude the Keypad buttons either no matter what rule I put in. When I pull in the switch only, I also get all the buttons even if the nodedef for the button is excluded

[CompKingCanada]

I Noted that type 1.65.69.0 is the one that won't come in as switch only. But type 1.9.41.0 will (if I specifically only pull in the device address). They are KeypadDimmer_ADV vs KeypadDimmer for NodeDefID

The ones I don't want to include are KeypadButton_ADV nodes. I CAN exclude KeypadButton if I work hard at it!

[Chioti]

Hmmm... sounds like there is nothing we can do on our end and simply have to wait for this to be addressed.

[CompKingCanada]

I'm scanning the code to see if I can find anything that differs between these two node types..

[pradeepmouli]

This is something I’ll have to fix code-side.... thanks for letting me know.

…

Sent from my iPhone

On Sep 14, 2020, at 10:17 AM, Geoff Larsen ***@***.***> wrote:  I'm scanning the code to see if I can find anything that differs between these two node types.. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

[CompKingCanada]

Attached are my Dumps if that helps.

Dumps.zip

[bigtalljv]

It looks like CompKing and I am following the same path, I believe you helped me over on the ISY forum.

I'm having issues with my keypads in that only the main button works, the sub-buttons do not. I get this:
[9/27/2020, 10:11:03] [isy-nodejs] NodeChanged Event for Unidentified Device: {"seqnum":154,"sid":"uuid:666","control":"_3","action":"LU","node":4653,"eventInfo":{"lu":{"group":4653,"ctl":4653,"rsp":"43 A4 2F 6"}}}

It's a related problem to my garage door sensor issue as I was trying a work around to get a scene to turn on and off for status as the garage door sensor shows as unsupported.

Thanks
Jason