Bumping alphanumeric identifiers

[fleetingbytes]

Bumping alphanumeric identifiers

[fleetingbytes]

Hello Tom,

thanks for the comparison with npm semver. I wasn't aware of their strategy. My reason for picking the 2 was partly intuition, and partly unfamiliarity with item 11, subitem 4 of the semver spec.

Intuitively, I thought that I would rank alpha.0 < alpha. And my intuitive ranking between alpha.1 and alpha was fuzzy, you could argue either way. On the other hand, it was immediately obvious to me hat alpha < alpha.2. That's why I was suggesting 2 as the added default numeric identifier.

But now, having read the specification, appending 0 makes probably the most sense. I also like the Idea that we would follow the npm semver behavior.

[fleetingbytes]

@tomschr Thanks for the update.

[tomschr]

@Nagidal Thank you for your report, much appreciated. 👍

I've read the original semver specification, but I haven't found a specific answer to our case. The closest is the example from item 11, subitem 4. However, it deals with comparison, not with bumping a pre-release.

Nevertheless, your concern seems to be valid. However, I'm not sure about your expectation. You wrote that you've expected 2 from 1.0.0-rc. Why not 1? Or 0?

To get some inspiration, I've looked into npm's semver, especially semver.inc. This is the little interactive session that I did with node:

> const semver = require('semver');

> v = semver.parse("1.0.0-rc");
> semver.inc(v, "prerelease");
'1.0.0-rc.0'

In their case having just a rc as pre-release and bumping it produces rc.0. I think, that is reasonable and I would follow their approach. This would mean, our Python session would look like this:

>>> v = Version.parse("1.0.0-rc")
>>> v.bump_prerelease()
Version(major=1, minor=0, patch=0, prerelease='rc.0', build=None)

What do you think?
(By the way, VersionInfo was renamed to Version. The first is deprecated and will be removed in later versions.)

[tomschr]

I remember now that @vincent-herlemont opened in #344 a very similar issue (see also PR #365)

[fleetingbytes]

As for using VersionInfo instead of Version: the 3.0.0-dev.3 is a pre-release and as such not fit for use in production yet. What you get when you pip install python-semver is the 2.13.0, so that's what I wrote my plugin for. I intend to update it to use python-semver 3.0.0 once it is released.

[tomschr]

As for using VersionInfo instead of Version: the 3.0.0-dev.3 is a pre-release and as such not fit for use in production yet. What you get when you pip install python-semver is the 2.13.0, so that's what I wrote my plugin for. I intend to update it to use python-semver 3.0.0 once it is released.

Yes, that's true. It was just meant as a friendly reminder for the upcoming release. 🙂

[tomschr]

Hi @Nagidal,

as I already wrote, your issue is related to #344. I gave both some thought and it raises some questions to me. I would like to hear your opinion (and maybe @vincent-herlemont too?):

1. We could follow the NPM's approach and bump a version from 1.0.0-rc to 1.0.0-rc.0. However, the return value would be different from what semver2 did. If we follow NPM's approach, this would introduce a backward-incompatible change. As we will release semver3, that would be fine for a major release. Of course I document incompatible changes. Still not entirely sure as people could still be surprised by that.

2. Issue #344 requests to pass an empty string to .bump_prerelease() (and .bump_build()). What should happen if we already have a release and want to bump it?

    >>> Version.parse("1.0.0-rc").bump_prerelease("")
    # return value -> ???

   Possible values could be 1.0.0-0, 1.0.0-rc.0, 1.0.0-rc.1. Or something else?

What do you think?

[fleetingbytes]

I think in these cases we could take advantage of Python's None not being the same as "". If we start counting the prereleases at 0, this is what we should go with:

Old version	API call	New version	Comment
1.0.0	bump_prerelease()	1.0.0-rc.0	Lower version!
1.0.0	bump_prerelease("")	1.0.0-0	rc replaced with "". Lower version!
1.0.0-rc	bump_prerelease()	1.0.0-rc.0
1.0.0-rc	bump_prerelease("")	1.0.0-0	rc replaced with "". Lower version!
1.0.0-rc	bump_prerelease("rc.1")	1.0.0-rc.1
1.0.0-rc	bump_prerelease("0")	1.0.0-0	rc replaced with 0. Lower version!
1.0.0-rc	bump_prerelease("1")	1.0.0-1	rc replaced with 1. Lower version!
1.0.0-alpha.3	bump_prerelease()	1.0.0-alpha.4
1.0.0-alpha.3	bump_prerelease("")	1.0.0-0	Lower version!
1.0.0-alpha.3	bump_prerelease("rc")	1.0.0-rc
1.0.0-alpha.3	bump_prerelease("rc.0")	1.0.0-rc.0
1.0.0-alpha.3	bump_prerelease("rc.1")	1.0.0-rc.1

I now prefer not to follow the npm semver behavior of bumping alphanumeric identifiers. It is very different from python-semver 2.x. I like the default numeric identifiers starting at 1 better. The user can still override it:

Old version	API call	New version	Comment
1.0.0	bump_prerelease()	1.0.0-rc.1	Lower version!
1.0.0	bump_prerelease("")	1.0.0-1	rc replaced with "". Lower version!
1.0.0-rc	bump_prerelease()	1.0.0-rc.1
1.0.0-rc	bump_prerelease("")	1.0.0-1	rc replaced with "". Lower version!
1.0.0-rc	bump_prerelease("rc.0")	1.0.0-rc.0
1.0.0-rc	bump_prerelease("0")	1.0.0-0	rc replaced with 0. Lower version!
1.0.0-rc	bump_prerelease("1")	1.0.0-1	rc replaced with 1. Lower version!
1.0.0-alpha.3	bump_prerelease()	1.0.0-alpha.4
1.0.0-alpha.3	bump_prerelease("")	1.0.0-1	Lower version!
1.0.0-alpha.3	bump_prerelease("rc")	1.0.0-rc
1.0.0-alpha.3	bump_prerelease("rc.0")	1.0.0-rc.0
1.0.0-alpha.3	bump_prerelease("rc.1")	1.0.0-rc.1

Either way, we will need to specify a new default token value. It can't be rc anymore. It must be either rc.0 or rc.1. Because if we introduce the handling of unnumbered alphanumerics, we must give the user the possibility to say that he wants to introduce an unnumbered alphanumeric identifier, i.e. by specifying token=<alphanumeric_identifier>.

I also think that the keyword argument token should be renamed to identifier (semver spec talks about identifiers, not tokens),

[fleetingbytes]

method name bump_prerelease is increasingly becoming a misnomer. It's more a change_prerelease method than a bump. For real bumping we have next_version

Old version	API call	New version	Comment
1.0.0	next_version("prerelease")	1.0.1-rc.1	or rc.0
1.0.0	next_version("prerelease", identifier="")	1.0.1-1	or 0
1.0.0	next_version("prerelease", identifier="alpha")	1.0.1-alpha
1.0.0	next_version("prerelease", identifier="alpha.0")	1.0.1-alpha.0
1.0.0	next_version("prerelease", identifier="alpha.1")	1.0.1-alpha.1

etc.

[fleetingbytes]

We should also think about the variable type of the keyword token (or identifier as it could be called in the future). Since users would occasionally pass it values like alpha.1, it is actually not one identifier, but two, potentially even more. Hence it could be a tuple type or list type (more precisely, a Optional[Iterable[Union[Alphanumeric_Identifier, Numeric_Identifier]]]. The identifiers separator . is enforced by the semver spec anyway, so the user has no power overriding it. Consequently, he should not be obliged to write it when passing multiple identifiers. The API call should use identifiers (note the plural):

change_prerelease(identifiers=("alpha", 1))
next_version(part="prerelease", identifiers=("alpha", 1))

the new default value would then be the tuple ("rc", 1) – or ("rc", 0) rather than the string rc.1 or rc.0

For single identifiers we would have to use a one-tuple ("rc", ), (1, ), and for empty strings ("", ).

There still can be an additional method to parse a string of concatenated identifiers into an identifier iterable, but the underlying API should not be passed the identifier separator, ever .e.g:

v = Version.parse("1.0.0")
v.change_prerelease(identifiers=Version.parse_identifiers("alpha.1"))

If, hypothetically, Semver 3.0.0 would decide that the new separator is : rather than ., we shall not have to change the prerelease and build bumping methods or any other methods (e.g. _nat_comp, parse_identifiers). We should rather just change the read-only value of some Version.IDENTIFIER_SEPARATOR from . to : and all our methods would instantly work with the new separator.

[tomschr]

Thanks for the overview. This is really helpful. 👍

I need to digest it a bit longer and will respond later. Many thanks.

[tomschr]

@Nagidal Just for your information: I've merged PR #365 which fixes the .bump_prerelease() and .bump_build() methods. As you suggested, the default numeric identifiers starting at 1. This is implemented now.

Regarding the misnomer of token I'm still thinking about it. Your suggestion of using identifiers sounds interesting. For the time being, I'd like to keep this issue open. I would prefer to look again into this issue after semver 3 is released.

Thanks for all your ideas!