cannot start jtop

[rbonghi]

cannot start jtop

[kenchan13]

Output from jetson-release:

 - NVIDIA Jetson NANO/TX1
   * Jetpack 4.2 [L4T 32.1.0]
   * CUDA GPU architecture 5.3
 - Libraries:
   * CUDA 10.0.166
   * cuDNN 7.3.1.28-1+cuda10.0
   * TensorRT 5.0.6.3-1+cuda10.0
   * Visionworks 1.6.0.500n
   * OpenCV 3.4.6 compiled CUDA: YES
 - Jetson Performance: inactive

output from sudo nvpmodel -q --verbose

NVPM VERB: Config file: /etc/nvpmodel.conf
NVPM VERB: parsing done for /etc/nvpmodel.conf
NVPM VERB: Current mode: NV Power Mode: MAXN
0
NVPM VERB: PARAM CPU_ONLINE: ARG CORE_0: PATH /sys/devices/system/cpu/cpu0/online: REAL_VAL: 1 CONF_VAL: 1
NVPM VERB: PARAM CPU_ONLINE: ARG CORE_1: PATH /sys/devices/system/cpu/cpu1/online: REAL_VAL: 1 CONF_VAL: 1
NVPM VERB: PARAM CPU_ONLINE: ARG CORE_2: PATH /sys/devices/system/cpu/cpu2/online: REAL_VAL: 1 CONF_VAL: 1
NVPM VERB: PARAM CPU_ONLINE: ARG CORE_3: PATH /sys/devices/system/cpu/cpu3/online: REAL_VAL: 1 CONF_VAL: 1
NVPM VERB: PARAM CPU_A57: ARG MIN_FREQ: PATH /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq: REAL_VAL: 102000 CONF_VAL: 0
NVPM VERB: PARAM CPU_A57: ARG MAX_FREQ: PATH /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq: REAL_VAL: 1428000 CONF_VAL: 2147483647
NVPM VERB: PARAM GPU_POWER_CONTROL_ENABLE: ARG GPU_PWR_CNTL_EN: PATH /sys/devices/gpu.0/power/control: REAL_VAL: auto CONF_VAL: on
NVPM VERB: PARAM GPU: ARG MIN_FREQ: PATH /sys/devices/gpu.0/devfreq/57000000.gpu/min_freq: REAL_VAL: 76800000 CONF_VAL: 0
NVPM VERB: PARAM GPU: ARG MAX_FREQ: PATH /sys/devices/gpu.0/devfreq/57000000.gpu/max_freq: REAL_VAL: 921600000 CONF_VAL: 2147483647
NVPM VERB: PARAM GPU_POWER_CONTROL_DISABLE: ARG GPU_PWR_CNTL_DIS: PATH /sys/devices/gpu.0/power/control: REAL_VAL: auto CONF_VAL: auto
NVPM VERB: PARAM EMC: ARG MAX_FREQ: PATH /sys/kernel/nvpmodel_emc_cap/emc_iso_cap: REAL_VAL: 0 CONF_VAL: 0

[rbonghi]

Hi @kenchan13

Thanks for your message! I will fix soon!
It is a wrong conversion from in fan controller python (require a decode for python3)

[rbonghi]

Already released the new version, upgrade with (fast way without wait to update the cache in your jetson)

sudo -H pip3 install --no-cache-dir -U jetson-stats

[kenchan13]

Thanks!! 「Raffaello Bonghi <[email protected]>」在 2019年6月18日 週二，下午10:21 寫道：

…

Already released the new version, upgrade with (fast way without wait to update the cache in your jetson) sudo -H pip3 install --no-cache-dir -U jetson-stats — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#20?email_source=notifications&email_token=AAOLDD3IL74QARW4JPQGU63P3DVPRA5CNFSM4HY7S4TKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODX6ZIJY#issuecomment-503157799>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AAOLDDYK5LYDIRYQIJR7RD3P3DVPRANCNFSM4HY7S4TA> .