default units of measurement and display of names after renaming

[realthunder]

default units of measurement and display of names after renaming

[tiket18]

It only shows up in the status bar, but I (personally) turn it off on narrow screens - so there is very little screen space.

[tiket18]

Here is an example. It clearly indicates an error in the size setting in the sketch 73. What exactly is the constraint? - does not indicate. Here, the tree shows absolutely all specified limitations - all dimensions are specified correctly in them.

[tiket18]

Yay, I have caught this moment. The problem is checked both in the current build of this branch of appimage, and in the one I have built locally. The problem is not reproduced in the main branch. It looks like it - here I see a supposedly broken sketch in the project tree (due to complaints of the solver not specified units of measurement), open this sketch and check it - all the constraints that are set with the value specified correctly. But suddenly I see - there are restrictions without knowledge, but for some reason they have the "calculated by function" icon on the right - in this case it is for some reason a horizontal restriction. I can delete it, set a new one = the program (what is locally assembled, what is the apimage) immediately drops. The main branch silently closes the sketch and sees no more errors in it.

SketchObject.cpp(6906): Duplicated external reference in _______________________________#Sketch067: Sketch066.;g296;SKT
SketchObject.cpp(6906): Duplicated external reference in _______________________________#Sketch067: Sketch066.;g297;SKT
SketchObject.cpp(6906): Duplicated external reference in _______________________________#Sketch067: Sketch066.;g302;SKT
SketchObject.cpp(6906): Duplicated external reference in _______________________________#Sketch067: Sketch066.;g288;SKT
SketchObject.cpp(6906): Duplicated external reference in _______________________________#Sketch067: Sketch066.;g293;SKT
SketchObject.cpp(6906): Duplicated external reference in _______________________________#Sketch067: Sketch066.;g321;SKT
SketchObject.cpp(6957): External geometry _______________________________#Sketch067.e355 missing reference: ���c SketchObject.cpp(6957): External geometry _______________________________#Sketch067.e356 missing reference: ����� SketchObject.cpp(6957): External geometry _______________________________#Sketch067.e357 missing reference: $J�� SketchObject.cpp(6957): External geometry _______________________________#Sketch067.e358 missing reference: SketchObject.cpp(6957): External geometry _______________________________#Sketch067.e359 missing reference: � �q<VProgram received signal SIGSEGV, Segmentation fault.
#0 /usr/lib/libc.so.6(+0x3d6a0) [0x7fc5b70266a0]
#1 0x7fc56c46653f in Sketcher::SketchObject::rebuildVertexIndex() from /usr/lib/freecad/lib/Sketcher.so+0x14f
#2 0x7fc56c469441 in Sketcher::SketchObject::rebuildExternalGeometry(bool) from /usr/lib/freecad/lib/Sketcher.so+0xb31
#3 0x7fc56c47b303 in Sketcher::SketchObject::execute() from /usr/lib/freecad/lib/Sketcher.so+0x63
#4 0x7fc5b8f4453a in App::DocumentObject::recompute() from /usr/lib/freecad/lib/libFreeCADApp.so+0x8a
#5 0x7fc5b1876f6a in Part::Feature::recompute() from /usr/lib/freecad/lib/Part.so+0xa
#6 0x7fc5b8ecee29 in App::Document::_recomputeFeature(App::DocumentObject*) from /usr/lib/freecad/lib/libFreeCADApp.so+0x219
#7 0x7fc5b8ee6567 in App::Document::recompute(std::vector<App::DocumentObject*, std::allocatorApp::DocumentObject* > const&, bool, bool*, int) from /usr/lib/freecad/lib/libFreeCADApp.so+0x997
#8 0x7fc5b8f9d09f in App::DocumentPy::recompute(_object*) from /usr/lib/freecad/lib/libFreeCADApp.so+0x2df
#9 0x7fc5b8f9d297 in App::DocumentPy::staticCallback_recompute(_object*, _object*) from /usr/lib/freecad/lib/libFreeCADApp.so+0x57
#10 /usr/lib/libpython3.8.so.1.0(PyCFunction_Call+0x19a) [0x7fc5b87928fa]
#11 /usr/lib/libpython3.8.so.1.0(_PyObject_MakeTpCall+0x464) [0x7fc5b87854d4]
#12 /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x50e8) [0x7fc5b8780da8]
#13 /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0x304) [0x7fc5b877a9a4]
#14 /usr/lib/libpython3.8.so.1.0(PyEval_EvalCode+0x23) [0x7fc5b882af03]
#15 /usr/lib/libpython3.8.so.1.0(+0x1d8868) [0x7fc5b8836868]
#16 /usr/lib/libpython3.8.so.1.0(+0x1d2a43) [0x7fc5b8830a43]
#17 /usr/lib/libpython3.8.so.1.0(PyRun_StringFlags+0x7d) [0x7fc5b882d8ad]
#18 0x7fc5b8b3fa0c in Base::InterpreterSingleton::runString[abi:cxx11](char const*) from /usr/lib/freecad/lib/libFreeCADBase.so+0x6c
#19 0x7fc5b987c716 in Gui::Command::_runCommand(char const*, int, Gui::Command::DoCmd_Type, char const*) from /usr/lib/freecad/lib/libFreeCADGui.so+0x96
#20 0x7fc5b987c896 in Gui::Command::_doCommand(char const*, int, Gui::Command::DoCmd_Type, char const*, ...) from /usr/lib/freecad/lib/libFreeCADGui.so+0xe6
#21 0x7fc5b987c9c5 in Gui::Command::updateActive() from /usr/lib/freecad/lib/libFreeCADGui.so+0x45
#22 0x7fc56c76188d in SketcherGui::ViewProviderSketch::unsetEdit(int) from /usr/lib/freecad/lib/SketcherGui.so+0x71d
#23 0x7fc5b9c0a7a8 in Gui::ViewProvider::finishEditing() from /usr/lib/freecad/lib/libFreeCADGui.so+0x38
#24 0x7fc5b97e6e3d in Gui::Document::_resetEdit() from /usr/lib/freecad/lib/libFreeCADGui.so+0x9d
#25 0x7fc5b978ef1a in Gui::Application::setEditDocument(Gui::Document*) from /usr/lib/freecad/lib/libFreeCADGui.so+0x3a
#26 0x7fc5b97b99ff in Gui::Application::sResetEdit(_object*, _object*) from /usr/lib/freecad/lib/libFreeCADGui.so+0x2f
#27 /usr/lib/libpython3.8.so.1.0(PyCFunction_Call+0x19a) [0x7fc5b87928fa]
#28 /usr/lib/libpython3.8.so.1.0(_PyObject_MakeTpCall+0x464) [0x7fc5b87854d4]
#29 /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x50e8) [0x7fc5b8780da8]
#30 /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0x304) [0x7fc5b877a9a4]
#31 /usr/lib/libpython3.8.so.1.0(PyEval_EvalCode+0x23) [0x7fc5b882af03]
#32 /usr/lib/libpython3.8.so.1.0(+0x1d8868) [0x7fc5b8836868]
#33 /usr/lib/libpython3.8.so.1.0(+0x1d2a43) [0x7fc5b8830a43]
#34 /usr/lib/libpython3.8.so.1.0(PyRun_StringFlags+0x7d) [0x7fc5b882d8ad]
#35 0x7fc5b8b3fa0c in Base::InterpreterSingleton::runString[abi:cxx11](char const*) from /usr/lib/freecad/lib/libFreeCADBase.so+0x6c
#36 0x7fc5b987c716 in Gui::Command::_runCommand(char const*, int, Gui::Command::DoCmd_Type, char const*) from /usr/lib/freecad/lib/libFreeCADGui.so+0x96
#37 0x7fc5b987c896 in Gui::Command::_doCommand(char const*, int, Gui::Command::DoCmd_Type, char const*, ...) from /usr/lib/freecad/lib/libFreeCADGui.so+0xe6
#38 0x7fc56c7900fb in SketcherGui::TaskDlgEditSketch::reject() from /usr/lib/freecad/lib/SketcherGui.so+0xfb
#39 0x7fc5b9b6d7ac in Gui::TaskView::TaskView::reject() from /usr/lib/freecad/lib/libFreeCADGui.so+0x5c
#40 /usr/lib/libQt5Core.so.5(+0x2eb070) [0x7fc5b7694070]
#41 /usr/lib/libQt5Widgets.so.5(+0x2f2291) [0x7fc5b82bc291]
#42 /usr/lib/libQt5Core.so.5(+0x2eb070) [0x7fc5b7694070]
#43 0x7fc5b8215b23 in QAbstractButton::clicked(bool) from /usr/lib/libQt5Widgets.so.5+0x43
#44 /usr/lib/libQt5Widgets.so.5(+0x24c4ac) [0x7fc5b82164ac]
#45 /usr/lib/libQt5Widgets.so.5(+0x24de53) [0x7fc5b8217e53]
#46 0x7fc5b8218033 in QAbstractButton::mouseReleaseEvent(QMouseEvent*) from /usr/lib/libQt5Widgets.so.5+0xf3
#47 0x7fc5b8165b0e in QWidget::event(QEvent*) from /usr/lib/libQt5Widgets.so.5+0x1ce
#48 0x7fc5b8124752 in QApplicationPrivate::notify_helper(QObject*, QEvent*) from /usr/lib/libQt5Widgets.so.5+0x82
#49 0x7fc5b812b87b in QApplication::notify(QObject*, QEvent*) from /usr/lib/libQt5Widgets.so.5+0x4ab
#50 0x7fc5b9846499 in Gui::GUIApplication::notify(QObject*, QEvent*) from /usr/lib/freecad/lib/libFreeCADGui.so+0x89
#51 0x7fc5b765ccda in QCoreApplication::notifyInternal2(QObject*, QEvent*) from /usr/lib/libQt5Core.so.5+0x12a
#52 0x7fc5b812a87e in QApplicationPrivate::sendMouseEvent(QWidget*, QMouseEvent*, QWidget*, QWidget*, QWidget**, QPointer&, bool, bool) from /usr/lib/libQt5Widgets.so.5+0x1de
#53 /usr/lib/libQt5Widgets.so.5(+0x1b4249) [0x7fc5b817e249]
#54 /usr/lib/libQt5Widgets.so.5(+0x1b763f) [0x7fc5b818163f]
#55 0x7fc5b8124752 in QApplicationPrivate::notify_helper(QObject*, QEvent*) from /usr/lib/libQt5Widgets.so.5+0x82
#56 0x7fc5b9846499 in Gui::GUIApplication::notify(QObject*, QEvent*) from /usr/lib/freecad/lib/libFreeCADGui.so+0x89
#57 0x7fc5b765ccda in QCoreApplication::notifyInternal2(QObject*, QEvent*) from /usr/lib/libQt5Core.so.5+0x12a
#58 0x7fc5b7a374ac in QGuiApplicationPrivate::processMouseEvent(QWindowSystemInterfacePrivate::MouseEvent*) from /usr/lib/libQt5Gui.so.5+0x6ac
#59 0x7fc5b7a0cbac in QWindowSystemInterface::sendWindowSystemEvents(QFlagsQEventLoop::ProcessEventsFlag) from /usr/lib/libQt5Gui.so.5+0xbc
#60 /usr/lib/libQt5XcbQpa.so.5(+0x5ef9c) [0x7fc5add4af9c]
#61 /usr/lib/libglib-2.0.so.0(g_main_context_dispatch+0x184) [0x7fc5b5389924]
#62 /usr/lib/libglib-2.0.so.0(+0xa6621) [0x7fc5b53dd621]
#63 /usr/lib/libglib-2.0.so.0(g_main_context_iteration+0x31) [0x7fc5b5388131]
#64 0x7fc5b76b5941 in QEventDispatcherGlib::processEvents(QFlagsQEventLoop::ProcessEventsFlag) from /usr/lib/libQt5Core.so.5+0x61
#65 0x7fc5b765b65c in QEventLoop::exec(QFlagsQEventLoop::ProcessEventsFlag) from /usr/lib/libQt5Core.so.5+0x12c
#66 0x7fc5b7663af4 in QCoreApplication::exec() from /usr/lib/libQt5Core.so.5+0x94
#67 0x7fc5b979a9cc in Gui::Application::runApplication() from /usr/lib/freecad/lib/libFreeCADGui.so+0x181c
#68 freecad(+0x45e0) [0x563c607c55e0]
#69 /usr/lib/libc.so.6(__libc_start_main+0xf2) [0x7fc5b7011152]
#70 freecad(+0x48ee) [0x563c607c58ee]

[realthunder]

Can you please post a file showing the problem? Things like 1 + 2mm is considered illegal because of mixed units. If it is 1 + 2, then it will be default to mm if bound to a quantity property.

Regarding the object name inside error message, you can easily find the object by pressing CTRL + F in tree view, and type the name you see in the message. The reason to not show label (the user assigned name) is because of the message may show object hierarchy. So a user changeable label containing arbitrary character will be confusing. Note that you can directly type the object hierarchy in the search box to find the child item.

[tiket18]

файл выслал Вам на электронную почту - гитхаб не пускает по размеру.
file was sent to you by e-mail - githab does not allow the size.

[tiket18]

It wasn't me who made it up about mixed indication of units. The problem arose when in the table I began not only to set the numbers, and in the neighboring cells to write formulas like B11 +2 * B12 +2 and in such cases in +2 was clearly required to specify mm. I think this league should be corrected.

[tiket18]

The assembly from 22-10-2020, is better, opening and closing such a sketch solves the problem. Thank you very much for the progress, for your work.