Comments (4)
I'm unable to reproduce your problem (svdrpsend plug satip trac 0x18):
- stopping minisatip:
vdr[3497]: [3543] curl_easy_perform() [rtsp.c,284] failed: Couldn't connect to server (7)
vdr[3497]: [3543] SATIP-ERROR: Detected invalid status code 0: rtsp://192.168.0.5/ [device 0]
vdr[3497]: [3543] SATIP5: bool cSatipRtsp::Play(const char_) (rtsp://192.168.0.5/stream=1?addpids=281&delpids=258) Response 0 in 1 ms [device 0]
vdr[3497]: [3543] SATIP-ERROR: Pid update failed - retuning [device 0]
vdr[3497]: [3543] SATIP4: virtual void cSatipTuner::Action(): tsSet [device 0]
vdr[3497]: [3543] curl_easy_perform() [rtsp.c,284] failed: Couldn't connect to server (7)
vdr[3497]: [3543] SATIP-ERROR: Detected invalid status code 0: rtsp://192.168.0.5/ [device 0]
vdr[3497]: [3543] SATIP5: bool cSatipRtsp::Play(const char_) (rtsp://192.168.0.5/stream=1?freq=562&bw=8&gi=18&fec=23&mtype=64qam&msys=dvbt&tmode=8k) Response 0 in 0 ms [device 0]
vdr[3497]: [3543] SATIP-ERROR: Connect failed [device 0]
- restarting minisatip
vdr[3497]: [3543] curl_easy_perform() [rtsp.c,165] failed: Couldn't connect to server (7)
vdr[3497]: [3543] SATIP-ERROR: Detected invalid status code 0: rtsp://192.168.0.5/ [device 0]
vdr[3497]: [3543] SATIP5: bool cSatipRtsp::Options(const char_) (rtsp://192.168.0.5/) Response 0 in 0 ms [device 0]
vdr[3497]: [3543] SATIP-ERROR: Connect failed [device 0]
vdr[3497]: [3543] SATIP5: bool cSatipRtsp::Options(const char_) (rtsp://192.168.0.5/) Response 200 in 202 ms [device 0]
vdr[3497]: [3543] SATIP5: bool cSatipRtsp::Setup(const char_, int, int) (rtsp://192.168.0.5/?freq=562&bw=8&gi=18&fec=23&mtype=64qam&msys=dvbt&tmode=8k, 43399, 43400) Response 200 in 0 s [device 0]
vdr[3497]: [3543] SATIP5: bool cSatipRtsp::Play(const char_) (rtsp://192.168.0.5/stream=1?pids=0,16,17,18,20,281,513,660,664,2027,5000) Response 200 in 43 ms [device 0]
vdr[3497]: [3543] SATIP4: virtual void cSatipTuner::Action(): tsTuned [device 0]
vdr[3497]: [3543] SATIP5: bool cSatipRtsp::Describe(const char*) (rtsp://192.168.0.5/stream=1) Response 200 in 1 ms [device 0]
from vdr-plugin-satip.
Strange. I have done my very best to reproduce this error with the latest version of your plugin - without success.
Either the problem is fixed, or my first test cases (which were reproducible) had a special constellation, which doesn't exists anymore.
I have installed the plugin on one of my production system (PI 2) and it works also. But now i have some problems with dvbapi.
(some times later)
After enabling dvbapi in minisatip, i have the same error as mentioned in the first post. I need to do some more tests to get a rock solid satip infrastructure.
from vdr-plugin-satip.
Well, I updated the repo yesterday and added code to prevent infinite tuning loops, so now you should get erroneous DESCRIBE answers no more than 20 seconds before re-tuning.
Please, let me know if I can close the issue.
from vdr-plugin-satip.
I reserved only one tuner for the server and disabling epg scan and the parameter "-d 1" do the trick. No more problems, very fast channel switch, several server restarts without a vdr problem... i'm happy.
Many thanks
from vdr-plugin-satip.
Related Issues (20)
- ERROR: SATIP poller thread HOT 5
- channel retune issue HOT 20
- missing quirk for Inverto IDL-400s HOT 4
- Reoccuring RTP errors with Octopus NET S2 V1.1.5/1.1.6 HOT 43
- Plugin uses all available tuners of AVM Fritz! box when using wirbelscan
- vdr-2.5.1 crash HOT 1
- New release? HOT 4
- question about your website HOT 1
- Glitches when switching channels HOT 6
- create satip.h HOT 4
- README/log improvements: list names of supported devices ("description"), quirks, ... HOT 2
- Plugin does not start fresh connection after Curl timeout HOT 2
- PIDs are added and removed again within milliseconds HOT 9
- Returncode 404 from minisatip is not handled HOT 6
- Session times out on EXIP418 when timeout is equal to eMinKeepAliveIntervalMs HOT 9
- 250ms delay between commands is missing sometimes HOT 1
- plugin reports signal strength in dBm wrong to vdr, if server reports zero signal strength HOT 8
- octopus: "RTSP/1.0 455 Method Not Valid in This State" followed by vdr crash
- Problem with StreamID 0 HOT 2
- Maintenance state of your plugins? HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from vdr-plugin-satip.