Cannot get to work with TOTP

[romedtino]

Cannot get to work with TOTP

[iainsmacleod]

It worked! Thank you for your patience.

…

On Sat, Jul 16, 2022 at 8:04 AM Iain MacLeod ***@***.***> wrote: I apologize. I did not follow that at all. I will try again. Many thanks! On Sat, Jul 16, 2022, 02:41 Jerome Tolentino ***@***.***> wrote: > It's not the recovery code you copy and paste, it's the base32 code you > get that you're supposed to put in the Authenticator. > > Here's a screenshot of that value you will need to copy when setting up > Simple Wyze Vac > > [image: image] > <https://user-images.githubusercontent.com/18567128/179343369-18c38381-0151-45e7-84ec-494f7c8ab6f1.png> > > and the excerpt from the TOTP steps I outlined > > Read the instructions from Wyze BUT make sure to copy and KEEP the value in step 3. This is your Base32 SECRET used to generate TOTP. > > This is also the same key you would put in the Authenticator app. > Depending on which you setup first, you can induce an error in Home > Assistant but as long as you setup both the Authenticator and Home > Assistant, it should still login. e.g. If you grab the Base32 code first > and put it in Simple Wyze Vac with your username and password, it will show > an error in the log (this is because you haven't setup your Authenticator > yet.) But once you finish setting up your Authenticator and finish the Wyze > 2FA setup, the login on Simple Wyze Vac should work. > > — > Reply to this email directly, view it on GitHub > <#37 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/ABAAPIXWPD2UKN56272XHNTVUJKQDANCNFSM5ZSOLJVA> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> >

[romedtino]

Perhaps the Wyze servers were down when you tried this? Have you tried it again?

I just tried it on my account with a fresh 2FA setup and it worked. Make sure you follow the order of sequences here - https://github.com/romedtino/simple-wyze-vac#totp

Specifically, the part where you copy the Base32 code, set it up on your Authenticator account, then setup Simple Wyze Vac with that same Base32 code NOT the TOTP 6 digits from the Authenticator you use.

[iainsmacleod]

Tried it several times. I'm reluctant to reset the code again, as I have a lot of automation and scenes around wyze cameras, and it will lose it when I redo the process.

…

On Wed, Jul 13, 2022, 14:47 Jerome Tolentino ***@***.***> wrote: Perhaps the Wyze servers were down when you tried this? Have you tried it again? I just tried it on my account with a fresh 2FA setup and it worked. Make sure you follow the order of sequences here - https://github.com/romedtino/simple-wyze-vac#totp Specifically, the part where you copy the Base32 code, set it up on your Authenticator account, then setup Simple Wyze Vac with that same Base32 code *NOT* the TOTP 6 digits from the Authenticator you use. — Reply to this email directly, view it on GitHub <#37 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABAAPIWNAYEREXYX4FQ3N7TVT4FNDANCNFSM5ZSOLJVA> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[iainsmacleod]

I just reset my 2FA to try this again. Copied and pasted the recovery code. Used my username and password to log in, and it just errors.

[romedtino]

It's not the recovery code you copy and paste, it's the base32 code you get that you're supposed to provide in the Authenticator app.

Here's a screenshot of that value you will need to copy when setting up Simple Wyze Vac.

and the excerpt from the TOTP steps I outlined

Read the instructions from Wyze BUT make sure to copy and KEEP the value in step 3. This is your Base32 SECRET used to generate TOTP.

This is also the same key you would put in the Authenticator app. Depending on which you setup first, you can induce an error in Home Assistant but as long as you setup both the Authenticator and Home Assistant, it should still login. e.g. If you grab the Base32 code first and put it in Simple Wyze Vac with your username and password, it will show an error in the log (this is because you haven't setup your Authenticator yet.) But once you finish setting up your Authenticator and finish the Wyze 2FA setup, the login on Simple Wyze Vac should work.

[iainsmacleod]

I apologize. I did not follow that at all. I will try again. Many thanks!

…

On Sat, Jul 16, 2022, 02:41 Jerome Tolentino ***@***.***> wrote: It's not the recovery code you copy and paste, it's the base32 code you get that you're supposed to put in the Authenticator. Here's a screenshot of that value you will need to copy when setting up Simple Wyze Vac [image: image] <https://user-images.githubusercontent.com/18567128/179343369-18c38381-0151-45e7-84ec-494f7c8ab6f1.png> and the excerpt from the TOTP steps I outlined Read the instructions from Wyze BUT make sure to copy and KEEP the value in step 3. This is your Base32 SECRET used to generate TOTP. This is also the same key you would put in the Authenticator app. Depending on which you setup first, you can induce an error in Home Assistant but as long as you setup both the Authenticator and Home Assistant, it should still login. e.g. If you grab the Base32 code first and put it in Simple Wyze Vac with your username and password, it will show an error in the log (this is because you haven't setup your Authenticator yet.) But once you finish setting up your Authenticator and finish the Wyze 2FA setup, the login on Simple Wyze Vac should work. — Reply to this email directly, view it on GitHub <#37 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABAAPIXWPD2UKN56272XHNTVUJKQDANCNFSM5ZSOLJVA> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[romedtino]

Sounds good, glad you got it working!