IDP.Generic Threat

[ryanvolz]

IDP.Generic Threat

[ryanvolz]

You'll have to trust me and the conda-forge community, but we're not putting a virus in there (at least intentionally - it would be a big security breach if a nefarious actor snuck something in!).

gdbus.exe is part of the glib-tools package which is built from the glib feedstock. I don't know why AVG antivirus thinks it's a threat, but it is a normal part of glib which is depended on by the Gtk GUI toolkit among other things. If you can override AVG, then I would suggest that.

[PE2016]

Hello Ryan I added an exception to suppress the virus alerts and it installed. Now, where do I find support and updated steps to communicate with the USRP 210N? Attached is what I got when running conda info; am I missing something? Thank you, Ramez

…

On Tue, Apr 26, 2022 at 11:16 AM Ryan Volz ***@***.***> wrote: You'll have to trust me and the conda-forge community, but we're not putting a virus in there (at least intentionally - it would be a big security breach if a nefarious actor snuck something in!). gdbus.exe is part of the glib-tools package which is built from the glib feedstock <https://github.com/conda-forge/glib-feedstock>. I don't know why AVG antivirus thinks it's a threat, but it is a normal part of glib which is depended on by the Gtk GUI toolkit among other things. If you can override AVG, then I would suggest that. — Reply to this email directly, view it on GitHub <#21 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AE77RWES2YZDKAPNYIFMUZLVHAXGXANCNFSM5UJ5KX5Q> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[ryanvolz]

Github scrubbed your attachment, so I can't see what your conda info shows, but it probably doesn't matter. Now that you have a complete installation, you will have the uhd package installed. There are no special steps needed for using a USRP N210 with radioconda on Windows, so you should follow the setup specified by NI/Ettus and do any troubleshooting that they recommend. Running uhd_find_devices is a great way to test whether your device is accessible. If you don't see it, you probably need to set up your IP address or the device's IP address and check your connections.

[PE2016]

Ryan Thank you for your prompt response. Find devices worked, where can I find a list of commands? Best Ramez

…

Sent from my iPhone

On Apr 27, 2022, at 11:07 AM, Ryan Volz ***@***.***> wrote:  Github scrubbed your attachment, so I can't see what your conda info shows, but it probably doesn't matter. Now that you have a complete installation, you will have the uhd package installed. There are no special steps needed for using a USRP N210 with radioconda on Windows, so you should follow the setup specified by NI/Ettus and do any troubleshooting that they recommend. Running uhd_find_devices is a great way to test whether your device is accessible. If you don't see it, you probably need to set up your IP address or the device's IP address and check your connections. — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.

[ryanvolz]

What kind of commands? Arguments for uhd_find_devices? Other UHD-related commands?

[PE2016]

Other UHF’s related commands Thanks Sent from my iPhone

…

On Apr 28, 2022, at 9:39 AM, Ryan Volz ***@***.***> wrote:  What kind of commands? Arguments for uhd_find_devices? Other UHD-related commands? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.

[ryanvolz]

All of the following programs can be executed as commands:

uhd_cal_rx_iq_balance
uhd_cal_tx_dc_offset
uhd_cal_tx_iq_balance
uhd_config_info
uhd_find_devices
uhd_image_loader
uhd_images_downloader
uhd_usrp_probe
usrp2_card_burner

Besides uhd_find_devices, I find uhd_image_loader, uhd_images_downloader, and uhd_usrp_probe to be the most commonly useful.

[PE2016]

Ryan When I ran <conda info>, I got (among other things) the following: *conda version : 4.12.0* * conda-build version : not installed* * python version : 3.10.4.final.0* *conda av metadata url : None * Is the highlighted line OK? Or am I missing something! *Also when I *updated the fw and fpga and recycled the power. Now < *uhd_usrp_probe* > worked. But I couldn't run gnu radio companion , fft or anything! Thanks again for your help, Ramez

…

On Thu, Apr 28, 2022 at 12:30 PM Ryan Volz ***@***.***> wrote: All of the following programs can be executed as commands: uhd_cal_rx_iq_balance uhd_cal_tx_dc_offset uhd_cal_tx_iq_balance uhd_config_info uhd_find_devices uhd_image_loader uhd_images_downloader uhd_usrp_probe usrp2_card_burner Besides uhd_find_devices, I find uhd_image_loader, uhd_images_downloader, and uhd_usrp_probe to be the most commonly useful. — Reply to this email directly, view it on GitHub <#21 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AE77RWDHBC57ARUOAT4D7ATVHLRNBANCNFSM5UJ5KX5Q> . You are receiving this because you authored the thread.Message ID: ***@***.***>