RSSI not working correctly

[scottgchin]

RSSI not working correctly

[ManCubFPV]

[scottgchin]

Those RSSI values are really high; they are normally below 300. The stranger part is that they all have the same value.

The working RSSI range on my unit is roughly 100-250. With no vtx powered on, the RSSI floor is around 60-80. Any chance you can provide details on the equipment you're using and how you have it wired?

[ManCubFPV]

Using the PCB v2.0

[scottgchin]

Looking at the image above. Connect the outside ground on the PCB to the receiver, that's the active ground. It needs that ground for a common reference point. I wrote that up in the description when the pcb was first released. If you followed Deep Impacts video, he went back and clarified to connect all the pins.

[ManCubFPV]

Thank you so much! I don't know how I missed that. Also thank you for all the hard work on this and your quick responses. Casey Pinochi 541-971-7763 [email protected]

…

On Mon, Apr 9, 2018, 07:34 scottgchin ***@***.***> wrote: Looking at the image above. Connect the outside ground on the PCB to the receiver, that's the active ground. It needs that ground for a common reference point. I wrote that up in the description when the pcb was first released. If you followed Deep Impacts video, he went back and clarified to connect all the pins. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#77 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AkcKYg346FW-D3B7aEVyz2bfPLijw8faks5tm3FagaJpZM4TMQ8P> .

[scottgchin]

No problem. Let me know if that fixes it, or if you come across any other issues.

[ManCubFPV]

On a side note, know anyone that wants the v2 PCB? I have 6 extra Casey Pinochi 541-971-7763 [email protected]

…

On Mon, Apr 9, 2018, 07:34 scottgchin ***@***.***> wrote: Looking at the image above. Connect the outside ground on the PCB to the receiver, that's the active ground. It needs that ground for a common reference point. I wrote that up in the description when the pcb was first released. If you followed Deep Impacts video, he went back and clarified to connect all the pins. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#77 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AkcKYg346FW-D3B7aEVyz2bfPLijw8faks5tm3FagaJpZM4TMQ8P> .

[scottgchin]

Actually... I could use them. Are you in the facebook group? Can you PM me there?

[ManCubFPV]

I share Facebook with my good half. It's kind of a pain for me to use. You can either text me at the number below or email me at the email below. Casey Pinochi 541-971-7763 [email protected]

…

On Mon, Apr 9, 2018, 08:22 scottgchin ***@***.***> wrote: Actually... I could use them. Are you in the facebook group? Can you PM me there? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#77 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AkcKYi16_ZTfLFgbuEJYZtFwFZcP3A-kks5tm3yrgaJpZM4TMQ8P> .

[ManCubFPV]

is there anyway to pull the video feed from the delta 5? On Mon, Apr 9, 2018 at 8:24 AM, Casey Pinochi <[email protected]> wrote:

…

I share Facebook with my good half. It's kind of a pain for me to use. You can either text me at the number below or email me at the email below. Casey Pinochi 541-971-7763 ***@***.*** On Mon, Apr 9, 2018, 08:22 scottgchin ***@***.***> wrote: > Actually... I could use them. Are you in the facebook group? Can you PM > me there? > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#77 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/AkcKYi16_ZTfLFgbuEJYZtFwFZcP3A-kks5tm3yrgaJpZM4TMQ8P> > . >

-- Casey Pinochi 530-228-6609 [email protected]

[scottgchin]

Well... I haven't tried it yet, but I want to just to see what happens. But, the premise of the timer is that away from the receivers, the RSSI would be really low and really high when the quad is passing over. It's one of the reasons for not adding an antenna. So at the far points of the track, I'm not sure the video would be very good.

[scottgchin]

Also... This issue has been corrected.