Comments (7)
seveas
commented on June 26, 2024
That's probably a bug in python-hpilo :)
What iLO firmware version are you on?
Please supply the XML debug output, following the steps at http://seveas.github.io/python-hpilo/troubleshooting.html
from python-hpilo.
DungKHoang
commented on June 26, 2024
Thanks!
The FW version is iLO3 1.7.
Will send you email with debug info
from python-hpilo.
DungKHoang
commented on June 26, 2024
Hi
here is the debug info
On Mon, Oct 13, 2014 at 1:19 PM, Dennis Kaarsemaker <
[email protected]> wrote:
That's probably a bug in python-hpilo :)
What iLO firmware version are you on?
Please supply the XML debug output, following the steps at
http://seveas.github.io/python-hpilo/troubleshooting.html—
Reply to this email directly or view it on GitHub
#59 (comment).
Dung K Hoang
HTTP/1.1 200 OK
Content-Type: text/xml
Date: Tue, 14 Oct 2014 16:51:17 GMT
Cache-Control: no-cache
Expires: Thu, 26 Oct 1995 00:00:00 GMT
Transfer-Encoding: chunked
Server: Allegro-Software-RomPager/4.62
Connection: close
0e8
0
HTTP/1.1 200 OK
Content-Type: text/xml
Date: Tue, 14 Oct 2014 16:51:19 GMT
Cache-Control: no-cache
Expires: Thu, 26 Oct 1995 00:00:00 GMT
Transfer-Encoding: chunked
Server: Allegro-Software-RomPager/4.62
Connection: close
0e8
1ff
1ff
1ff
1ff
<CAUTION
003
VA
1ff
LUE = "87" UNIT="Celsius"/>
1ff
1ff
1ff
<CAUTION VALUE = "81" UNIT="Celsius"/>
<CRITICAL VALUE = "86" UNIT="Celsius"/>
</TEMP>
<TEMP>
<LABEL VALUE = "11-CNA Zone"/>
<LOCATION VALUE = "I/O Board"/>
<STATUS VALUE = "OK"/>
<CURRENTREADING VALUE = "36" UNIT="Celsius"/>
<CAUTION VALUE = "81" UNIT="Celsius"/>
<CRITICAL VALUE = "86" UNIT="Celsius"/>
</TEMP>
<TEMP>
<LABEL VALUE = "12-Chassis Exit"/>
<LOCATI
003
ON
1ff
VALUE = "System"/>
<CRITICAL VALUE = "75"
1ff
UNIT="Celsius"/>
<POWER_SUPPLIES>
<POWER_SUPPLY_SUMMARY>
<PRESENT_POWER_READING VALUE = "0 Watts"/>
<POWER_MANAGEMENT_CONTROLLER_FIRMWARE_VERSION VALUE = "1.6"/>
<HIGH_EFFICIENCY_MODE VALUE = "Balanced"/>
</POWER_SUPPLY_SUMMARY>
</POWER_SUPPLIES>
1ff
<EXECUTION_TECHNOLOGY VALUE = "6/6 cores; 12 threads"/>
<MEMORY_TECHNOLOGY VALUE = "64-bit Capable"/>
<INTERNAL_L1_CACHE VALUE = "192 KB"/>
<INTERNAL_L2_CACHE VALUE = "1536 KB"/>
<INTERNAL_L3_CACHE VALUE = "12288 KB"/>
<LABEL VALUE
1ff
= "Proc 2"/>
<EXECUTION_TECHNOLOGY VALUE = "6/6 cores; 12 threads"/>
<MEMORY_TECHNOLOGY VALUE = "64-bit Capable"/>
<INTERNAL_L1_CACHE VALUE = "192 KB"/>
<INTERNAL_L2_CACHE VALUE = "1536 KB"/>
<INTERNAL_L3_CACHE VALUE = "12288 KB"/>
<MEMORY_COMPONENTS>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 1 DIMM 1D"/>
003
1ff
<MEMORY_SIZE VALUE = "Not Installed"/>
<MEMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 1 DIMM 2A"/>
<MEMORY_SIZE VALUE = "16384 MB"/>
<MEMORY_SPEED VALUE = "1067 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 1 DIMM 3E"/>
<MEMORY_SIZE VALUE = "Not Installed"/>
<M
1ff
EMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 1 DIMM 4B"/>
<MEMORY_SIZE VALUE = "16384 MB"/>
<MEMORY_SPEED VALUE = "1067 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 1 DIMM 5F"/>
<MEMORY_SIZE VALUE = "Not Installed"/>
<MEMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
1ff
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 1 DIMM 6C"/>
<MEMORY_SIZE VALUE = "Not Installed"/>
<MEMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 2 DIMM 1D"/>
<MEMORY_SIZE VALUE = "Not Installed"/>
<MEMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOC
1ff
ATION VALUE = "PROC 2 DIMM 2A"/>
<MEMORY_SIZE VALUE = "16384 MB"/>
<MEMORY_SPEED VALUE = "1067 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 2 DIMM 3E"/>
<MEMORY_SIZE VALUE = "Not Installed"/>
<MEMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 2 DIMM 4B"/>
<MEMORY_SIZE
003
VA
1ff
LUE = "16384 MB"/>
<MEMORY_SPEED VALUE = "1067 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 2 DIMM 5F"/>
<MEMORY_SIZE VALUE = "Not Installed"/>
<MEMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 2 DIMM 6C"/>
<MEMORY_SIZE VALUE = "Not Installed"/>
<MEMORY_SPEED VALUE =
1ff
"0 MHz"/>
</MEMORY_COMPONENT>
</MEMORY_COMPONENTS>
<NIC_INFOMATION>
<NETWORK_PORT VALUE = "Port 1"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:80"/>
<NETWORK_PORT VALUE = "Port 2"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:84"/>
<NETWORK_PORT VALUE = "Port 3"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:81"/>
1ff
<NETWORK_PORT VALUE = "Port 4"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:85"/>
<NETWORK_PORT VALUE = "Port 5"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:82"/>
<NETWORK_PORT VALUE = "Port 6"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:86"/>
<NETWORK_PORT VALUE = "Port 7"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:83"/>
<N
1b6
ETWORK_PORT VALUE = "Port 8"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:87"/>
<NETWORK_PORT VALUE = "iLO Dedicated Network Port"/>
<MAC_ADDRESS VALUE = "3c:4a:92:e3:33:1e"/>
<NETWORK_PORT VALUE = "Port 1"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:81"/>
<NETWORK_PORT VALUE = "Port 2"/>
07f
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:85"/>
</NIC_INFOMATION>
<FIRMWARE_INFORMATION>
1ff
<INDEX_1>
<FIRMWARE_NAME VALUE = "HP ProLiant System ROM"/>
<FIRMWARE_VERSION VALUE = "05/05/2011"/>
</INDEX_1>
<INDEX_2>
<FIRMWARE_NAME VALUE = "HP ProLiant System ROM - Backup"/>
<FIRMWARE_VERSION VALUE = "12/03/2012"/>
</INDEX_2>
<INDEX_3>
<FIRMWARE_NAME VALUE = "HP ProLiant System ROM Bootblock"/>
<FIRMWARE_VERSION VALUE = "03/08/2010"/>
</INDEX_3>
<INDEX_4>
<FIRMWARE_NAME VALUE
1ff
= "iLO"/>
<FIRMWARE_VERSION VALUE = "1.70 Pass 25 Jan 09 2014"/>
</INDEX_4>
<INDEX_5>
<FIRMWARE_NAME VALUE = "EEPROM"/>
<FIRMWARE_VERSION VALUE = "Initialization code 0x80"/>
</INDEX_5>
<INDEX_6>
<FIRMWARE_NAME VALUE = "Power Management Controller"/>
<FIRMWARE_VERSION VALUE = "1.6"/>
</INDEX_6>
<INDEX_7>
<FIRMWARE_NAME VALUE = "CPLD - PAL0"/>
<FIRMWARE_VERSION VALUE = "ProLiant BL4
1ff
60c G7 System Programmable Logic Device version 0x13"/>
</INDEX_7>
</FIRMWARE_INFORMATION>
<FIRMWARE_VERSION VALUE="1.18"/>
<ENCLOSURE_ADDR VALUE="224"/>
<DRIVE_BAY VALUE = "1"/>
<PRODUCT_ID VALUE = "EH0146FAWJB "/>
<UID_LED VALUE = "Off"/>
<DRIVE_BAY VALUE = "2"/>
<PRODUCT_ID VALUE = "EH0146FAWJB "/>
<STATUS
1ff
VALUE = "Ok"/>
<UID_LED VALUE = "Off"/>
<DRIVE_BAY VALUE = "3"/>
<PRODUCT_ID VALUE = "N/A"/>
<UID_LED VALUE = "Off"/>
<DRIVE_BAY VALUE = "4"/>
<PRODUCT_ID VALUE = "N/A"/>
<UID_LED VALUE = "Off"/>
<HEALTH_AT_A_GLANCE>
1f7
</HEALTH_AT_A_GLANCE>
</GET_EMBEDDED_HEALTH_DATA>
0
HTTP/1.1 200 OK
Content-Type: text/xml
Date: Tue, 14 Oct 2014 16:52:26 GMT
Cache-Control: no-cache
Expires: Thu, 26 Oct 1995 00:00:00 GMT
Transfer-Encoding: chunked
Server: Allegro-Software-RomPager/4.62
Connection: close
0e8
0
HTTP/1.1 200 OK
Content-Type: text/xml
Date: Tue, 14 Oct 2014 16:52:28 GMT
Cache-Control: no-cache
Expires: Thu, 26 Oct 1995 00:00:00 GMT
Transfer-Encoding: chunked
Server: Allegro-Software-RomPager/4.62
Connection: close
0e8
1ff
1ff
1ff
1ff
<CAUTION
003
VA
1ff
LUE = "87" UNIT="Celsius"/>
1ff
1ff
1ff
<CAUTION VALUE = "81" UNIT="Celsius"/>
<CRITICAL VALUE = "86" UNIT="Celsius"/>
</TEMP>
<TEMP>
<LABEL VALUE = "11-CNA Zone"/>
<LOCATION VALUE = "I/O Board"/>
<STATUS VALUE = "OK"/>
<CURRENTREADING VALUE = "36" UNIT="Celsius"/>
<CAUTION VALUE = "81" UNIT="Celsius"/>
<CRITICAL VALUE = "86" UNIT="Celsius"/>
</TEMP>
<TEMP>
<LABEL VALUE = "12-Chassis Exit"/>
<LOCATI
003
ON
070
VALUE = "System"/>
14f
<CAUTION V
1e7
ALUE = "70" UNIT="Celsius"/>
<POWER_SUPPLIES>
<POWER_SUPPLY_SUMMARY>
<PRESENT_POWER_READING VALUE = "0 Watts"/>
<POWER_MANAGEMENT_CONTROLLER_FIRMWARE_VERSION VALUE = "1.6"/>
<HIGH_EFFICIENCY_MODE VALUE = "Balanced"/>
</POWER_SUPPLY_SUMMARY>
</POWER_SUPPLIES>
<STATUS VA
1ff
LUE = "OK"/>
<EXECUTION_TECHNOLOGY VALUE = "6/6 cores; 12 threads"/>
<MEMORY_TECHNOLOGY VALUE = "64-bit Capable"/>
<INTERNAL_L1_CACHE VALUE = "192 KB"/>
<INTERNAL_L2_CACHE VALUE = "1536 KB"/>
<INTERNAL_L3_CA
1ff
CHE VALUE = "12288 KB"/>
<EXECUTION_TECHNOLOGY VALUE = "6/6 cores; 12 threads"/>
<MEMORY_TECHNOLOGY VALUE = "64-bit Capable"/>
<INTERNAL_L1_CACHE VALUE = "192 KB"/>
<INTERNAL_L2_CACHE VALUE = "1536 KB"/>
<INTERNAL_L3_CACHE VALUE = "12288 KB"/>
<MEMORY_COMPONENTS>
0d5
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 1 DIMM 1D"/>
<MEMORY_SIZE VALUE = "Not Installed"/>
<MEMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
1ff
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 1 DIMM 2A"/>
<MEMORY_SIZE VALUE = "16384 MB"/>
<MEMORY_SPEED VALUE = "1067 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 1 DIMM 3E"/>
<MEMORY_SIZE VALUE = "Not Installed"/>
<MEMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCAT
1ff
ION VALUE = "PROC 1 DIMM 4B"/>
<MEMORY_SIZE VALUE = "16384 MB"/>
<MEMORY_SPEED VALUE = "1067 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 1 DIMM 5F"/>
<MEMORY_SIZE VALUE = "Not Installed"/>
<MEMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 1 DIMM 6C"/>
<MEMORY_SIZE V
1ff
ALUE = "Not Installed"/>
<MEMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 2 DIMM 1D"/>
<MEMORY_SIZE VALUE = "Not Installed"/>
<MEMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 2 DIMM 2A"/>
<MEMORY_SIZE VALUE = "16384 MB"/>
<MEMORY_SPEED VALUE = "
1ff
1067 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 2 DIMM 3E"/>
<MEMORY_SIZE VALUE = "Not Installed"/>
<MEMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 2 DIMM 4B"/>
<MEMORY_SIZE VALUE = "16384 MB"/>
<MEMORY_SPEED VALUE = "1067 MHz"/>
</MEMORY_COMPONENT>
<MEMO
1ff
RY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 2 DIMM 5F"/>
<MEMORY_SIZE VALUE = "Not Installed"/>
<MEMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
<MEMORY_COMPONENT>
<MEMORY_LOCATION VALUE = "PROC 2 DIMM 6C"/>
<MEMORY_SIZE VALUE = "Not Installed"/>
<MEMORY_SPEED VALUE = "0 MHz"/>
</MEMORY_COMPONENT>
</MEMORY_COMPONENTS>
<NIC_INFOMATION>
1ff
<NETWORK_PORT VALUE = "Port 1"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:80"/>
<NETWORK_PORT VALUE = "Port 2"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:84"/>
<NETWORK_PORT VALUE = "Port 3"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:81"/>
<NETWORK_PORT VALUE = "Port 4"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:85"/>
1ff
<NETWORK_PORT VALUE = "Port 5"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:82"/>
<NETWORK_PORT VALUE = "Port 6"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:86"/>
<NETWORK_PORT VALUE = "Port 7"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:83"/>
<NETWORK_PORT VALUE = "Port 8"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:87"/>
13f
<NETWORK_PORT VALUE = "iLO Dedicated Network Port"/>
<MAC_ADDRESS VALUE = "3c:4a:92:e3:33:1e"/>
<NETWORK_PORT VALUE = "Port 1"/>
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:81"/>
<NETWORK_PORT VALUE = "Port 2"/>
1ff
<MAC_ADDRESS VALUE = "9a:a1:a7:60:00:85"/>
</NIC_INFOMATION>
<FIRMWARE_INFORMATION>
<INDEX_1>
<FIRMWARE_NAME VALUE = "HP ProLiant System ROM"/>
<FIRMWARE_VERSION VALUE = "05/05/2011"/>
</INDEX_1>
<INDEX_2>
<FIRMWARE_NAME VALUE = "HP ProLiant System ROM - Backup"/>
<FIRMWARE_VERSION VALUE = "12/03/2012"/>
</INDEX_2>
<INDEX_3>
<FIRMWARE_NAME VALUE = "HP ProLiant System ROM Bootbl
1ff
ock"/>
<FIRMWARE_VERSION VALUE = "03/08/2010"/>
</INDEX_3>
<INDEX_4>
<FIRMWARE_NAME VALUE = "iLO"/>
<FIRMWARE_VERSION VALUE = "1.70 Pass 25 Jan 09 2014"/>
</INDEX_4>
<INDEX_5>
<FIRMWARE_NAME VALUE = "EEPROM"/>
<FIRMWARE_VERSION VALUE = "Initialization code 0x80"/>
</INDEX_5>
<INDEX_6>
<FIRMWARE_NAME VALUE = "Power Management Controller"/>
<FIRMWARE_VERSION VALUE = "1.6"/>
</I
1ff
NDEX_6>
<INDEX_7>
<FIRMWARE_NAME VALUE = "CPLD - PAL0"/>
<FIRMWARE_VERSION VALUE = "ProLiant BL460c G7 System Programmable Logic Device version 0x13"/>
</INDEX_7>
</FIRMWARE_INFORMATION>
<FIRMWARE_VERSION VALUE="1.18"/>
<ENCLOSURE_ADDR VALUE="224"/>
<DRIVE_BAY VALUE = "1"/>
<PRODUCT_ID VALUE = "EH0146FAWJB "/>
<UID_LED VALUE
1ff
= "Off"/>
<DRIVE_BAY VALUE = "2"/>
<PRODUCT_ID VALUE = "EH0146FAWJB "/>
<UID_LED VALUE = "Off"/>
<DRIVE_BAY VALUE = "3"/>
<PRODUCT_ID VALUE = "N/A"/>
<UID_LED VALUE = "Off"/>
<DRIVE_BAY VALUE = "4"/>
<PRODUCT_ID VALUE = "N/A"/>
003
1ff
<UID_LED VALUE = "Off"/>
<HEALTH_AT_A_GLANCE>
</HEALTH_AT_A_GLANCE>
</GET_EMBEDDED_HEALTH_DATA>
074
0
HTTP/1.1 200 OK
Content-Type: text/xml
Date: Tue, 14 Oct 2014 16:49:55 GMT
Cache-Control: no-cache
Expires: Thu, 26 Oct 1995 00:00:00 GMT
Transfer-Encoding: chunked
Server: Allegro-Software-RomPager/4.62
Connection: close
0e8
0
HTTP/1.1 200 OK
Content-Type: text/xml
Date: Tue, 14 Oct 2014 16:49:56 GMT
Cache-Control: no-cache
Expires: Thu, 26 Oct 1995 00:00:00 GMT
Transfer-Encoding: chunked
Server: Allegro-Software-RomPager/4.62
Connection: close
0e8
079
0
HTTP/1.1 200 OK
Content-Type: text/xml
Date: Tue, 14 Oct 2014 16:50:15 GMT
Cache-Control: no-cache
Expires: Thu, 26 Oct 1995 00:00:00 GMT
Transfer-Encoding: chunked
Server: Allegro-Software-RomPager/4.62
Connection: close
0e8
0
HTTP/1.1 200 OK
Content-Type: text/xml
Date: Tue, 14 Oct 2014 16:50:16 GMT
Cache-Control: no-cache
Expires: Thu, 26 Oct 1995 00:00:00 GMT
Transfer-Encoding: chunked
Server: Allegro-Software-RomPager/4.62
Connection: close
0cf
1ff
0
from python-hpilo.
seveas
commented on June 26, 2024
Thanks for the debuginfo. Unfortunately, pasting it here really mangles the output. Could you please mail me the generated file as an attachment? ([email protected])
The debug output does show that it's definitely a bug in python-hpilo, so once I have the debug output, I will fix it asap.
from python-hpilo.
seveas
commented on June 26, 2024
It's actually a bug in the ilo3 firmware, it's misspelling NIC_INFORMATION as NIC_INFOMATION! A workaround is now in commit d1cc8fa. If this workaround works on your systems I will issue a bugfix release of python-hpilo.
from python-hpilo.
DungKHoang
commented on June 26, 2024
Please issue a bug fix.
It works great in my environment.
Thanks a lot!
On Tue, Oct 14, 2014 at 11:58 AM, Dennis Kaarsemaker <
[email protected]> wrote:
It's actually a bug in the ilo3 firmware, it's misspelling NIC_INFORMATION
as NIC_INFOMATION! A workaround is now in commit d1cc8fa
d1cc8fa.
If this workaround works on your systems I will issue a bugfix release of
python-hpilo.—
Reply to this email directly or view it on GitHub
#59 (comment).
Dung K Hoang
from python-hpilo.
seveas
commented on June 26, 2024
Version 2.9 has now been released.
from python-hpilo.
Related Issues (20)
- Is iLO5 supported? HOT 2
- hpilo_cli import_certificate - Internal CA singed cert import error
- ilo2 / ilo3 ssl unsupported protocol
- From Ansible, when targeting iLO version 5, only hw_eth0 and hw_eth_ilo show details, missing all other hw_ethX. HOT 1
- hpilo 4.4.3 : iLO2 : XML or text declaration not at start of entity: line 2, column 0
- HP download site seems to be missing intermediate certs.
- HPE Smart Array version details displayling null using latest version 4.4.3.
- [feature] Add ability to connect to ILO over HTTPS proxy
- Outdated COMPAQ (HP) iLO v2 sslv3 (tls1/aes-128) issue HOT 1
- Support for roles and/or new privileges gen10/ilo5 HOT 1
- (Debian) how to run tests
- get_one_time_boot not work
- python-hpilo can't connect anymore to an iLO2 server on python3.10 HOT 13
- EPEL 8 & 9 Package Maintainers Needed HOT 1
- missing BIOS setting feature
- hponcfg is being deprecated by HPE
- iLoError not clear after 100% download completion from hpilo_cli HOT 2
- Remove IRS Direct Connect functionality, as it has been discontinued.
- ilo6 compatibility HOT 2
- Some Python2 code still in hpilo_cli file
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from python-hpilo.