Problem with Analog Buttons

[shanteacontrols]

Problem with Analog Buttons

[paradajz]

I think you're confusing terms a bit here. Buttons aren't sending wrong channels, they are sending wrong MIDI indexes. Can you post how you have those buttons wired up?

[thomasf78]

Hi Igor,
thanks for your fast reply.
Sorry about confusing you.

I wired the buttons in the following manner:
Button 1 - Analog Port 10 (A:+ // B: Signal) --> AH2
Button 2 - Analog Port 11 (A:+ // B: Signal)
Button 3 - Analog Port 12 (A:+ // B: Signal)
Button 4 - Analog Port 13 (A:+ // B: Signal)
Button 5 - Analog Port 14 (A:+ // B: Signal)
Button 6 - Analog Port 15 (A:+ // B: Signal) --> not shown in the video

My plan is to do this also on AH3 for six more buttons. Not realised yet.
Just for testing purpose i wired up a button on:
Button x - Analog Port 31 (A:+ // B: Signal) --> the same behaviour --> MIDI Index 31 and 30 sent.

I hope this is helpful.
Thanks and best
Thomas

[paradajz]

Did you use the resistors?

[thomasf78]

hi igor. shame on me. i didn't. how i could forgot the important pulldown resistor.
thats the reason why i got wrong signals. thanks a lot. i will change my layout. many thanks. i will inform you if it works.
best thomas

[thomasf78]

Hi igor, thank you very much for your support. you can close the task.

@ everyone who is so stupid like i was, and has forgotten the pull down resistor -- here is the solution. :-)