Can I use the .bin upload of the Wifi Ducky to flash the new Duck bin

[spacehuhntech]

Can I use the .bin upload of the Wifi Ducky to flash the new Duck bin

[spacehuhn]

You can in theory yes. You'd have to select serial instead of i2c in the board/compiler settings and export a .bin file yourself and also flash the atmega with the new firmware.
But I would only recommend doing this if you know how to reflash the esp by hand in case something fails.

[craftycram]

Okay, thank you. I already ordered some new chips, but it will take some time for them to arrive in Germany from China..
If it goes wrong I have one of these ESP-12F flashing-boards (I think you had one in one of your videos), should be able to flash it with that as well, but I managed to get a pretty good looking end result with the wires and chips together which I don't really wanna destroy ^^
In which file are the I2C/serial settings located at?
I'm relatively new to flashing only the chip, not a nodemcu.

[stale]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.