Can't run scripts using a Tipe-C Nano SAMD21

[spacehuhntech]

Can't run scripts using a Tipe-C Nano SAMD21

[davidsbright]

Issue solved.
I looked at the board datasheet and found out that this board (compared to the Adafruit trinket m0) needs the pin RX of the D1 mini connected to the pin 10 of the Type-C board. And the pin TX connected to the pin 8 of the Type-C board.

I hope people will find this helpful.

[welcome]

Thanks for opening your first issue here! 🎉
👉 Be sure to:
1. 📖 Have a look at the Wiki and README for information
2. 🔍 Search for similar issues (open and closed)
3. ✍️ Provide enough information to understand, recreate and help out with your problem
4. ℹ️ Let us know if you find a solution
5. 📕 Close the issue when your problem has been solved

[davidsbright]

Little update
Here is a picture of how everything is connected. I tried connecting it to the pc with the cable but without the RX pin connected to the Trinket, and also tried with the Tx pin but it seemed like i was getting other errors if I disconnected them, maybe there is something to do with the program itself?

Thank you