Malduino W Displays: Internal Connection Error

[spacehuhntech]

Malduino W Displays: Internal Connection Error

[huntman312]

I believe i still do. But i wont be home for a while to check (like 6 hours). But if you email [email protected] he will get back to you with the files and instructions probably sometime really early in the morning if you live United States.

[Fox8ter]

Yeah same... All works now... Really thx.

[welcome]

Thanks for opening your first issue here! 🎉
👉 Be sure to:
1. 📖 Have a look at the Wiki and README for information
2. 🔍 Search for similar issues (open and closed)
3. ✍️ Provide enough information to understand, recreate and help out with your problem
4. ℹ️ Let us know if you find a solution
5. 📕 Close the issue when your problem has been solved

[SimiJS]

fixed

[huntman312]

fixd

how did you fix this?

[SimiJS]

Just email [email protected] with any issue.
for me they sent two files.
it didnt work becuase a mismatch between the versions of the chips and the software.
Email them and they tell you how. @huntman312

[jay-nutt3r]

@S1m1B1lly Don't suppose you still have the files?

[jay-nutt3r]

@huntman312 did you also fix this issue?

[jay-nutt3r]

@huntman312 thank for reply, i have emailed but still no response :(, if you could help me that would be awesome. nay from uk. cheers.

[lukariosmen]

@jay-nutt3r hi have you fixed this issue? I wrote an email to the support, but have not received any response.

[boxxyhf]

I believe i still do. But i wont be home for a while to check (like 6 hours). But if you email [email protected] he will get back to you with the files and instructions probably sometime really early in the morning if you live United States.

Could you perhaps still share the two files?

[lukariosmen]

malw-06-07-2022 (1).zip
Hi. Here are the needed files :).

[boxxyhf]

malw-06-07-2022 (1).zip Hi. Here are the needed files :).

Thanks! That fixed it. Working as a charm again!

[Fox8ter]

Hello @lukariosmen , (or @boxxyhf )

How to use these files?
can you provide the instructions ?

REgards

[boxxyhf]

Hello, @Fox8ter,

Follow this guide: http://docs.maltronics.com/malduino-w/troubleshooting/
But use the files in @lukariosmen's post.

[Fox8ter]

Same for the uf2 file?

[Miliik]

how do you use the uf2 as the the exe just let you choose .bin files ?
btw , i got the error right after following the reset guide ^^

[BlackCube4]

I have the same problem :/