strath-sdr / rfsoc_sam Goto Github PK
View Code? Open in Web Editor NEWRFSoC Spectrum Analyser Module on PYNQ.
License: BSD 3-Clause "New" or "Revised" License
RFSoC Spectrum Analyser Module on PYNQ.
License: BSD 3-Clause "New" or "Revised" License
Hey,
I want to analyze a Wi-Fi signal with the zcu111, but can't figure out how to reach the max sampling frequency of 4096. Cloud you maybe provide me some assistance with that?
From duddekk on a pynq.io post here: https://discuss.pynq.io/t/rfsoc2x2-adc-configuration-and-testing/3819
"
Hi,
I am experiencing strange behavior of the spectrum analyzer overlay implemented with the RFSoC2x2 module. Regardless of whether the inputs are connected or not, I observe a signal about 100 MHz wide on the spectrum. I am using a standard, freshly installed image version 2.7.
Additionally, when I turn on the spectrum analyzer, the program stops working. The spectrogram cannot be turned on. The signal spectrum is static, it does not refreshing.
For comparison, I have no such problems on the ZCU111 module.
Are there any additional tools to verify correct operation of the module?
Hello,
Thank you so much for providing the VHDL code of this project. I watched the youtube video (https://www.youtube.com/watch?v=PqPdfnbNxyY) where you described the block design of the project (rfsoc_sam.xpr). However, I couldn't fine the corresponding file in this github repo. Could you please upload it as well?
Thanks,
Ali
Hello,
According to PYNQ website, they used Vivado 2020.2 for Pynq 2.7. However, when I ran rfsoc_sam, seems like you guys are still using vivado 2020.1. Will there be any compatibility issues with Pynq 2.7 and Vivado 2020.1? Will you be upgrading to Vivado 2020.2?
Hi,
since the zcu208 rfsoc is supported officially in pynq. you consider to add support for this dev board?.
Hello,
I've tried viola without my board having internet access. It pulls up the loading screen but then afterwards nothing shows up. Has your group tried viola without internet access? Is there a way for this operate without internet?
thank you.
I want to compile this project completely for ZCU216 kit. Can anybody list the detailed instructions to do this ??
I'm currently working with your Pynq image 2.6 and have successfully implemented the rfsoc_qpsk build. I'm wanting to implement the rfsoc_sam but my ZCU111 does not have a WiFi dongle and I am unable to create a shared internet connection. As a result, the I cannot do a pip3 install of the repository, is there a PYNQ image containing this build already on it like the rfsoc_qpsk? Or, is there a way to target the ZCU111 with the bitstream?
The following does not work for XUPRFSoC board ...
# check whether board is supported
def check_env():
if not board == 'ZCU111':
raise ValueError("Board {} is not supported.".format(board))
I get this error when trying to PIP install on the XUPRFSOC board ...
Collecting git+https://github.com/strath-sdr/rfsoc_sam.git
Cloning https://github.com/strath-sdr/rfsoc_sam.git to /tmp/pip-req-build-d1seet5o
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3 -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-req-build-d1seet5o/setup.py'"'"'; __file__='"'"'/tmp/pip-req-build-d1seet5o/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-z7ldtg1k
cwd: /tmp/pip-req-build-d1seet5o/
Complete output (7 lines):
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/pip-req-build-d1seet5o/setup.py", line 35, in <module>
check_env()
File "/tmp/pip-req-build-d1seet5o/setup.py", line 16, in check_env
raise ValueError("Board {} is not supported.".format(board))
ValueError: Board XUPRFSOC is not supported.
----------------------------------------
With or without the CLK104 board.
Dear @dnorthcote / @LewisMcL / @lbrown65 ,
I'm working on developing a spectrum analyzer using the RFSoC 4x2 board in conjunction with MATLAB. I'm aiming to increase the FFT size to 16384 samples for improved frequency resolution, but the current maximum in my implementation is 8192.
Specific questions:
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.