This package can be included in a python3 project to easily integrate
with SuprSend
platform.
suprsend-py-sdk
is available on PyPI. You can install using pip.
pip install suprsend-py-sdk
This SDK depends on a system package called libmagic
. You can install it as follows:
# On debian based systems
sudo apt install libmagic
# If you are using macOS
brew install libmagic
Initialize the SuprSend SDK
from suprsend import Suprsend
# Initialize SDK
supr_client = Suprsend("workspace_key", "workspace_secret")
Following example shows a sample request for triggering a workflow.
It triggers a pre-created workflow purchase-made
to a recipient with id: distinct_id
,
email: [email protected]
& androidpush(fcm-token): __android_push_fcm_token__
from suprsend import WorkflowTriggerRequest
# Prepare Workflow body
wf = WorkflowTriggerRequest(
body={
"workflow": "purchase-made",
"recipients": [
{
"distinct_id": "0f988f74-6982-41c5-8752-facb6911fb08",
# if $channels is present, communication will be tried on mentioned channels only (for this request).
# "$channels": ["email"],
"$email": ["[email protected]"],
"$androidpush": [{"token": "__android_push_token__", "provider": "fcm", "device_id": ""}],
}
],
# data can be any json / serializable python-dictionary
"data": {
"first_name": "User",
"spend_amount": "$10",
"nested_key_example": {
"nested_key1": "some_value_1",
"nested_key2": {
"nested_key3": "some_value_3",
},
}
}
}
)
# Trigger workflow
response = supr_client.workflows.trigger(wf)
print(response)
When you call supr_client.workflows.trigger
, the SDK internally makes an HTTP call to SuprSend
Platform to register this request, and you'll immediately receive a response indicating
the acceptance status.
You can also pass idempotency-key
while triggering a workflow. Maximum length of idempotency_key can be 64 chars.
idempotency_key has multiple uses e.g.
- Avoid duplicate request. If Suprsend receives and processes a request with an idempotency_key, it will skip processing requests with same idempotency_key for next 24 hours.
- You can use this key to track webhooks related to workflow notifications.
from suprsend import WorkflowTriggerRequest
workflow_body = {...}
wf = WorkflowTriggerRequest(body=workflow_body, idempotency_key="__uniq_request_id__")
# You can also pass the tenant_id on behalf of which the workflow is to run.
wf = WorkflowTriggerRequest(body=workflow_body, idempotency_key="__uniq_request_id__", tenant_id="default")
# Trigger workflow
response = supr_client.workflows.trigger(wf)
print(response)
Note: The actual processing/execution of workflow happens asynchronously.
# If the call succeeds, response will looks like:
{
"success": True,
"status": "success",
"status_code": 202,
"message": "Message received",
}
# In case the call fails. You will receive a response with success=False
{
"success": False,
"status": "fail",
"status_code": 400/500,
"message": "error message",
}
To add one or more Attachments to a Workflow/Notification (viz. Email),
call WorkflowTriggerRequest.add_attachment(file_path)
.
If providing a local path, ensure that it is proper, otherwise it will raise FileNotFoundError.
from suprsend import WorkflowTriggerRequest
workflow_body = {...}
wf_instance = WorkflowTriggerRequest(body=workflow_body)
# this snippet can be used to add attachment to workflow.
file_path = "/home/user/billing.pdf"
wf_instance.add_attachment(file_path)
The add_attachment(...)
call appends below structure to body->data->'$attachments'
{
"filename": "billing.pdf",
"contentType": "application/pdf",
"data": "Q29uZ3JhdHVsYXRpb25zLCB5b3UgY2FuIGJhc2U2NCBkZWNvZGUh",
}
Where
filename
- name of file.contentType
- MIME-type of file content.data
- base64-encoded content of file.
- a single workflow body size must not exceed 800KB (800 * 1024 bytes).
- if size exceeds above mentioned limit, SDK raises python's builtin ValueError.
You can send bulk request for workflows in one call. Use .append()
on bulk_workflows instance
to add however-many-records to call in bulk.
from suprsend import WorkflowTriggerRequest
bulk_ins = supr_client.workflows.bulk_trigger_instance()
# one or more workflow instances
workflow1 = WorkflowTriggerRequest(body={...}) # body must be a proper workflow request json/dict
workflow2 = WorkflowTriggerRequest(body={...}) # body must be a proper workflow request json/dict
# --- use .append on bulk instance to add one or more records
bulk_ins.append(workflow1)
bulk_ins.append(workflow2)
# OR
bulk_ins.append(workflow1, workflow2)
# -------
response = bulk_ins.trigger()
print(response)
- There isn't any limit on number-of-records that can be added to bulk_workflows instance.
- On calling
bulk_ins.trigger()
the SDK internally makes one-or-more Callable-chunks. - each callable-chunk contains a subset of records, the subset calculation is based on each record's bytes-size and max allowed chunk-size and chunk-length etc.
- for each callable-chunk SDK makes an HTTP call to SuprSend To register the request.
If you regularly trigger a workflow for users on some pre-decided channels, then instead of adding user-channel-details in each workflow request, you can set those channel-details in user profile once, and after that, in workflow trigger request you only need to pass the distinct_id of the user. All associated channels in User profile will be automatically picked when executing the workflow.
- First Instantiate a user object
distinct_id = "__uniq_user_id__" # Unique id of user in your application
# Instantiate User profile
user = supr_client.user.get_instance(distinct_id=distinct_id)
- To add channel details to this user (viz. email, sms, whatsapp, androidpush, iospush etc)
use
user.add_*
method(s) as shown in the example below.
# Add channel details to user-instance. Call relevant add_* methods
user.add_email("[email protected]") # - To add Email
user.add_sms("+919999999999") # - To add SMS
user.add_whatsapp("+919999999999") # - To add Whatsapp
user.add_androidpush("__android_push_fcm_token__") # - by default, token is assumed to be fcm-token
# You can set the optional provider value [fcm/xiaomi/oppo] if its not a fcm-token
user.add_androidpush("__android_push_xiaomi_token__", provider="xiaomi")
user.add_iospush("__iospush_token__")
user.add_slack({"email": "[email protected]", "access_token": "xoxb-XXXXXXXXXXXX"}) # - DM user using email
user.add_slack({"user_id": "U03XXXXXXXX", "access_token": "xoxb-XXXXXXXXXXXX"}) # - DM user using slack member_id if known
user.add_slack({"channel_id": "C03XXXXXXXX", "access_token": "xoxb-XXXXXXXXXXXX"}) # - Use channel id
user.add_slack({"incoming_webhook": {"url": "https://hooks.slack.com/services/TXXXXXXXXX/BXXXXXX/XXXXXXX"}}) # - Use incoming webhook
user.add_ms_teams({"tenant_id": "XXXXXXX", "service_url": "https://smba.trafficmanager.net/XXXXXXXXXX", "conversation_id": "XXXXXXXXXXXX"}) # - DM on Team's channel using conversation id
user.add_ms_teams({"tenant_id": "XXXXXXX", "service_url": "https://smba.trafficmanager.net/XXXXXXXXXX", "user_id": "XXXXXXXXXXXX"}) # - DM user using team user id
user.add_ms_teams({"incoming_webhook": {"url": "https://XXXXX.webhook.office.com/webhookb2/XXXXXXXXXX@XXXXXXXXXX/IncomingWebhook/XXXXXXXXXX/XXXXXXXXXX"}}) # - Use incoming webhook
# After setting the channel details on user-instance, call save()
response = user.save()
print(response)
# Response structure
{
"success": True, # if true, request was accepted.
"status": "success",
"status_code": 202, # http status code
"message": "OK",
}
{
"success": False, # error will be present in message
"status": "fail",
"status_code": 500, # http status code
"message": "error message",
}
- Similarly, If you want to remove certain channel details from user,
you can call
user.remove_*
method as shown in the example below.
# Remove channel helper methods
user.remove_email("[email protected]")
user.remove_sms("+919999999999")
user.remove_whatsapp("+919999999999")
user.remove_androidpush("__android_push_fcm_token__")
user.remove_androidpush("__android_push_xiaomi_token__", provider="xiaomi")
user.remove_iospush("__iospush_token__")
user.remove_slack({"email": "[email protected]", "access_token": "xoxb-XXXXXXXXXXXX"}) # - DM user using email
user.remove_slack({"user_id": "U03XXXXXXXX", "access_token": "xoxb-XXXXXXXXXXXX"}) # - DM user using slack member_id if known
user.remove_slack({"channel_id": "C03XXXXXXXX", "access_token": "xoxb-XXXXXXXXXXXX"}) # - Use channel id
user.remove_slack({"incoming_webhook": {"url": "https://hooks.slack.com/services/TXXXXXXXXX/BXXXXXX/XXXXXXX"}}) # - Use incoming webhook
user.remove_ms_teams({"tenant_id": "XXXXXXX", "service_url": "https://smba.trafficmanager.net/XXXXXXXXXX", "conversation_id": "XXXXXXXXXXXX"}) # - DM on Team's channel using conversation id
user.remove_ms_teams({"tenant_id": "XXXXXXX", "service_url": "https://smba.trafficmanager.net/XXXXXXXXXX", "user_id": "XXXXXXXXXXXX"}) # - DM user using team user id
user.remove_ms_teams({"incoming_webhook": {"url": "https://XXXXX.webhook.office.com/webhookb2/XXXXXXXXXX@XXXXXXXXXX/IncomingWebhook/XXXXXXXXXX/XXXXXXXXXX"}}) # - Use incoming webhook
# save
response = user.save()
print(response)
- If you need to delete/unset all emails (or any other channel) of a user,
you can call
unset
method on the user instance. The method accepts the channel key/s (a single key or list of keys)
# --- To delete all emails associated with user
user.unset("$email")
response = user.save()
print(response)
# what value to pass to unset channels
# for email: $email
# for whatsapp: $whatsapp
# for SMS: $sms
# for androidpush tokens: $androidpush
# for iospush tokens: $iospush
# for webpush tokens: $webpush
# for slack: $slack
# for ms_teams: $ms_teams
# --- multiple channels can also be deleted in one call by passing argument as a list
user.unset(["$email", "$sms", "$whatsapp"])
user.save()
- You can also set preferred language of user using
set_preferred_language(lang_code)
. Value for lang_code must be 2-letter code in theISO 639-1 Alpha-2 code
format. e.g. en (for English), es (for Spanish), fr (for French) etc.
# --- Set 2-letter language code in "ISO 639-1 Alpha-2" format
user.set_preferred_language("en")
response = user.save()
print(response)
- You can also set timezone of user using
set_timezone(timezone)
. Value for timezone must be from amongst the IANA timezones as maintained in the latest release here: https://data.iana.org/time-zones/tzdb-2024a/zonenow.tab.
# --- Set timezone property at user level in IANA timezone format
user.set_timezone("America/Los_Angeles")
response = user.save()
print(response)
- Note: After calling
add_*
/remove_*
/unset
/set_*
methods, don't forget to calluser.save()
. On call of save(), SDK sends the request to SuprSend platform to update the User-Profile.
Once channels details are set at User profile, you only have to mention the user's distinct_id while triggering workflow. Associated channels will automatically be picked up from user-profile while processing the workflow. In the example below, we are passing only distinct_id of the user:
from suprsend import WorkflowTriggerRequest
# Prepare Workflow body
request_body = {
"workflow": "purchase-made",
"recipients": [
{
"distinct_id": "0f988f74-6982-41c5-8752-facb6911fb08",
}
],
# data can be any json / serializable python-dictionary
"data": {
"first_name": "User",
"spend_amount": "$10",
"nested_key_example": {
"nested_key1": "some_value_1",
"nested_key2": {
"nested_key3": "some_value_3",
},
}
}
}
wf = WorkflowTriggerRequest(body=request_body)
# Trigger workflow
response = supr_client.workflows.trigger(wf)
print(response)
You can send multiple subscriber requests in one call. Use .append()
on bulk_users instance
to add however-many-records to call in bulk.
bulk_ins = supr_client.bulk_users.new_instance()
# Prepare multiple users
u1 = supr_client.user.get_instance("distinct_id_1") # User 1
u1.set_email("[email protected]")
u2 = supr_client.user.get_instance("distinct_id_2") # User 2
u2.set_email("[email protected]")
# --- use .append on bulk instance to add one or more records
bulk_ins.append(u1)
bulk_ins.append(u2)
# OR
bulk_ins.append(u1, u2)
# -------
response = bulk_ins.save()
print(response)
You can track and send events to SuprSend platform by using supr_client.track_event
method.
An event is composed of an event_name
, tracked wrt a user: distinct_id
, with event-attributes: properties
from suprsend import Event
# Example
distinct_id = "__uniq_user_id__" # Mandatory, Unique id of user in your application
event_name = "__event_name__" # Mandatory, name of the event you're tracking
properties = {} # Optional, default=None, a dict representing event-attributes
event = Event(distinct_id=distinct_id, event_name=event_name, properties=properties)
# You can also add Idempotency-key
event = Event(distinct_id=distinct_id, event_name=event_name, properties=properties,
idempotency_key="__uniq_request_id__")
# You can also pass the tenant_id to be used for templates/notifications
event = Event(distinct_id=distinct_id, event_name=event_name, properties=properties,
idempotency_key="__uniq_request_id__", tenant_id="default")
# Send event
response = supr_client.track_event(event)
print(response)
# Response structure
{
"success": True, # if true, request was accepted.
"status": "success",
"status_code": 202, # http status code
"message": "OK",
}
{
"success": False, # error will be present in message
"status": "fail",
"status_code": 500, # http status code
"message": "error message",
}
You can send multiple events in one call. Use .append()
on bulk_events instance
to add however-many-records to call in bulk.
from suprsend import Event
bulk_ins = supr_client.bulk_events.new_instance()
# Example
e1 = Event("distinct_id1", "event_name1", {"k1": "v1"}) # Event 1
e2 = Event("distinct_id2", "event_name2", {"k2": "v2"}) # Event 2
# --- use .append on bulk instance to add one or more records
bulk_ins.append(e1)
bulk_ins.append(e2)
# OR
bulk_ins.append(e1, e2)
# -------
response = bulk_ins.trigger()
print(response)