gnss-sdrlib with rtl sdr

[taroz]

gnss-sdrlib with rtl sdr

[Strykar]

Issue lies in lines 34 and 37 in https://github.com/taroz/GNSS-SDRLIB/blob/master/src/rcv/rtlsdr/rtlsdr.c
Changing to dev_index=1;;" and "verbose_device_search("1")" let's device 1 instead of 0 connect.

[hoangnt9]

I got the same problem with you, and change the parameter as above. However still the same error.
Any suggestion ?

[Strykar]

Did you recompile it after making the changes? What is the error you see?

[hoangnt9]

I open the file, edit and save it. Then the same problem occur.
So I thought that I need to compile again too, however when I Open it by VS 2013.
I cannot compile that C file.

[Strykar]

Recompile the full solution, not just that file.

[hoangnt9]

But I did not find file solution. Can you give the link to file Project (.csproj) or file of Solution (.sln) ?

[qingliu2]

Hello all,
I fixed this problem, and the SDR can run. But, I can't see any output in the monitor. In other words, whether the antenna is connected or not, the output are the same, all the satellites with the same C/N0 35dB........
Thanks
Qing

[butaniravi]

Hii all, With nooelec mini 2+ rtl sdr (0.5ppm TCXO) + Cheap GPS Active Antenna + my DIY Bias tee, I am getting 4 Satellite locked but getting error "error: GPS subframe number sfn=.." and suddenly satellite get out of lock.. So not getting location Fix, Any help highly appreciated..

Cheers,
Ravi

[Alexdichi]

But I did not find file solution. Can you give the link to file Project (.csproj) or file of Solution (.sln) ?

Hello, have you find a solution?