Comments (5)
Hello Elpekenin,
please note I am just another user of this great script. Not sure I can help but let's try.
As you can login and see your devices, I think all configuration is good and nothing is lacking.
I am always specifying the device with -d and do not rely on any default device.
As long as you have a problem, I recommend to use -d devicename to be sure.
Try to let Alexa speak while playing music. Does music stop or reduce volume while the device should speak?
Are you sure loudness is high and not zero? I fell into this trap some time ago ... it speaked with volume 0 ... try -z
Sometimes the normal command fails for some time ... no clue why that happens. Must be issues at Amazon.
During such time I replace the command (e.g. -r radio) by textcommand "play radio" as workaround.
You can also try the workaround -e textcommand:"say Hello". Then the device should also say "Hello".
Option -q gives you a lot of information. Perhaps you glance through it and perhaps you spot something ...
Regards,
Horst
from alexa-remote-control.
one more idea: are your two devices connected as a stereo pair? If yes, this may be relevant:
my stereo pairs loose the ability to speak every few days.
Also, when I use the Alexa by my normal voice, they don't speak.
Unlinking the pair, disconnect & reconnect power, re-link the pair solves this.
I don't think it is an issue of the script here but an issue of Amazon.
So in case they are a paired stereo device, unpair, reboot and try again....
and a last one: your device name "de HIMTAE" has a space?
I would avoid that for many reasons ...
from alexa-remote-control.
Thanks for all the information :)
I am always specifying the device with -d
- Tried both with and without it, didn't spot any difference
- Same results
Try to let Alexa speak while playing music
- Will try ASAP
- Can't hear any change
Are you sure loudness is high and not zero?
- I'm pretty sure I also sent some "change volume" commands yesterday but can't really recall, will re-check
-z
doesn't output any volume, just the device's info
textcommand as workaround
- Same as before, pretty sure I tried doing so, but will re-check
- Nothing either
stereo pair
- I don't even knew there was such thing, so most likely they arent
has a space?
- Yeah it does, will try and remove it
- Changed to
Test
for now
- Changed to
-q
shows the same for both devices, am i missing some config? is this maybe an issue with Spanish? Alexa-Cookie's server and script are configured with amazon.com
and en-US
except for SET_LANGUAGE
and SET_TTS_LOCALE
which are set to es-ES
{
"playerInfo": {
"hint": null,
"infoText": null,
"isPlayingInLemur": false,
"lemurVolume": null,
"lyrics": null,
"mainArt": null,
"mediaId": null,
"miniArt": null,
"miniInfoText": null,
"playbackSource": null,
"playingInLemurId": null,
"progress": null,
"provider": null,
"quality": null,
"queueId": null,
"state": null,
"template": null,
"transport": null,
"upNextItems": null,
"volume": null
}
}
{
"message": "Device is not connected/initialized"
}
{
"queueInfo": {
"header": null,
"media": null,
"nextPageToken": null,
"previousPageToken": null,
"queueType": null
}
}
from alexa-remote-control.
Hi elpekenin,
yeah the link to amazon.com may be issue. I have a German amazon account, and am linked to amazon.de:
SET_AMAZON='amazon.de'
Did you try to set your relevant line to amazon.es?
Regards,
Horst
from alexa-remote-control.
I did try several configs over the days but i dont really remember them anymore.
Ended up using a Home Assistant integration which worked fine for my needs.
- It can launch my skill without me speaking (not really sure how)
- My skill now reads a variable stored on Home Assistant and says that upon being launched
Thx for the help anyway, closing this :)
from alexa-remote-control.
Related Issues (20)
- how to use "sound:<soundeffect_name>" HOT 4
- Tunein Jingle HOT 8
- "Phantom" device, how to remove?
- Seems answer from "-lastalexa" is changed by Amazon HOT 2
- 20220617 - "Strange" REFRESH_TOKEN generated by alexa-cookie-cli HOT 2
- Trouble Installing HOT 1
- setting default device to: ERROR: unknown device dev: HOT 10
- <InternalFailure/> from Play & Pause // parse error from jq? HOT 6
- Multiple errors "date: invalid date" HOT 14
- Old Linux Distri with jq 1.4 and curl 7.38 script error with solution ;-)
- Initial login page has changed HOT 2
- Failed writing body HOT 2
- ERROR: cookie retrieval with refresh_token didn't work HOT 2
- Error -lastalexa and -last command HOT 20
- Login procedure does not work anymore (even with new uri) HOT 2
- alexa_remote_control.sh dosn't recieve a cookie anymore... HOT 2
- Return code for commands given to alexa-remote-control HOT 1
- no idea how to use it
- ERROR: no CSRF cookie received HOT 21
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from alexa-remote-control.