Add possibility to select input device

[hrw]

Add possibility to select input device

[tias]

Hey Marcin,

I enjoyed talking to you at FOSDEM.
I've now committed the changes that allow you to select any device (even devices with the same name).
try: xinput_calibrator_x11 --list
and: xinput_calibrator_x11 --device ...

Could you try it out ? it works fine here (only one device though ; )

I'm not sure if it will actually be possible to calibrate when there are 2 screens attached: it could be that the GUI is spread over both, or that the clicks are with respect to the virtual screen (instead of the physical screen).
Let me know if you find the time to try out : )

Kind regards,
Tias

[hrw]

root@bug:# DISPLAY=:0 xinput_calibrator --list
Device "ts4" id=2
Device "ts5" id=3
root@bug:# DISPLAY=:0 xinput --list
"Virtual core keyboard" id=0 [XKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Virtual core pointer" id=1 [XPointer]
Num_buttons is 32
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is 0
Max_value is -1
Resolution is 0
Axis 1 :
Min_value is 0
Max_value is -1
Resolution is 0
"ts4" id=2 [XExtensionPointer]
Num_buttons is 1
Num_axes is 2
Mode is Absolute
Motion_buffer is 0
Axis 0 :
Min_value is 0
Max_value is 319
Resolution is 320
Axis 1 :
Min_value is 0
Max_value is 239
Resolution is 240
"ts5" id=3 [XExtensionPointer]
Num_buttons is 1
Num_axes is 2
Mode is Absolute
Motion_buffer is 0
Axis 0 :
Min_value is 0
Max_value is 319
Resolution is 320
Axis 1 :
Min_value is 0
Max_value is 239
Resolution is 240
"" id=4 [XExtensionKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255

and it works so I close this.

[tias]

Thanks for testing!