How to Upgrade FPGA Firmware Version

[renyang0911]

How to Upgrade FPGA Firmware Version

[xvortex]

What .jic are you using? Try this one
ssmaster.jic.zip

[yopigo]

What .jic are you using? Try this one ssmaster.jic.zip

Thanks you very much xvortex, my saroo now have fpga:05, log on quartus is same with ssmaster.jic i use before, but if use file that you give my firmware fpga now 05

[tpunix]

The message says that the project usb 16Mb flash chip, but you have a 8Mb flash chip.
You can ignore this message.

[stakeshadow]

pay less and you get an inferior product

[stakeshadow]

KK's victims

[tpunix]

02版的FPGA固件没有升级功能。只能用编程器升级。尽量不要买这种板子。

[ribenyamazun123]

It has nothing to do with the board. Upgrading it with a programmer is the same as other boards.

[cyo-the-vile]

You do realize the developer is the one that replied to you, right?

…

On Fri, Nov 3, 2023, 11:50 PM ribenyamazun123 ***@***.***> wrote: It has nothing to do with the board. Upgrading it with a programmer is the same as other boards. — Reply to this email directly, view it on GitHub <#23 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/APPFYF7ISYQOT2YW5FZANGLYCXCRHAVCNFSM6AAAAAA64AB342VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOJTGMZTSMBVHE> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[ribenyamazun123]

You should ask tpunix why 02 doesn't provide me SD card update

[yopigo]

please help i try to update fpga firmware with usb blaster, progress is 100% but found warning message on quartus ii log,

[yopigo]

is it because of the chip on u8?

[xvortex]

is it because of the chip on u8?

Just ignore this warning. It is OK.

[yopigo]

i try again but result is same fpga fimware no change,
this is quarus ii log
Info (209060): Started Programmer operation at Wed Nov 15 10:30:59 2023
Info (209016): Configuring device index 1
Info (209017): Device 1 contains JTAG ID code 0x020F10DD
Info (209007): Configuration succeeded -- 1 device(s) configured
Info (209018): Device 1 silicon ID is 0x14
Info (209044): Erasing ASP configuration device(s)
Warning (209074): The attached JTAG Indirect Confgiuration File (.jic) or Programming Object File (.pof), 16Mb, is larger than the Serial Flash device, 8Mb at device 1 -- Only the first 8Mb JTAG Indirect Configuration File or Programming Object File data will be programmed to the device
Info (209023): Programming device(s)
Info (209011): Successfully performed operation(s)
Info (209061): Ended Programmer operation at Wed Nov 15 10:31:19 2023

please help me, whats wrong

[xvortex]

Try also check the verify and blank check flags

[yopigo]

Try also check the verify and blank check flags

thank you, but same result, can you give me another tip or anoher file?

Info (209060): Started Programmer operation at Wed Nov 15 11:55:51 2023
Info (209016): Configuring device index 1
Info (209017): Device 1 contains JTAG ID code 0x020F10DD
Info (209007): Configuration succeeded -- 1 device(s) configured
Info (209018): Device 1 silicon ID is 0x14
Info (209044): Erasing ASP configuration device(s)
Info (209019): Blank-checking device(s)
Warning (209074): The attached JTAG Indirect Confgiuration File (.jic) or Programming Object File (.pof), 16Mb, is larger than the Serial Flash device, 8Mb at device 1 -- Only the first 8Mb JTAG Indirect Configuration File or Programming Object File data will be programmed to the device
Info (209023): Programming device(s)
Info (209021): Performing CRC verification on device(s)
Info (209011): Successfully performed operation(s)
Info (209061): Ended Programmer operation at Wed Nov 15 11:56:17 2023

[yopigo]

What .jic are you using? Try this one ssmaster.jic.zip

tutorial from retro memory on youtube, https://www.youtube.com/watch?v=huaf3aTuMJk, file download from https://drive.google.com/drive/folders/19BPgJ5iUv9Gyi_oBw1esXiZZeMZxIyPR