Comments (5)
jkbullard
commented on June 2, 2024
Please post the diagnostic info obtained by following the instructions at Read Before You Post.
from tunnelblick.
sharperer
commented on June 2, 2024
I am experiencing the same issue. The config worked previously.
*Tunnelblick: macOS 13.5 (22G74); Tunnelblick 4.0.0beta07 (build 5870); prior version 4.0.0beta06 (build 5860); Admin user
git commit 20605d0
The Tunnelblick.app process is not being translated (arm64)
System Integrity Protection is enabled
Model: MacBookPro18,2
Configuration new_vpnConfig
"Sanitized" condensed configuration file for /Library/Application Support/Tunnelblick/Shared/new_vpnConfig.tblk:
client
dev tap
proto udp
sndbuf 393216
rcvbuf 393216
push "sndbuf 393216"
push "rcvbuf 393216"
remote swharper.ddns.net 12974
resolv-retry infinite
nobind
persist-key
persist-tun
ca ca.crt
cert client.crt
key client.key
cipher AES-128-CBC
comp-lzo
verb 0
================================================================================
Files in new_vpnConfig.tblk:
Contents/Resources/cli….crt
Contents/Resources/ca.crt
Contents/Resources/config.ovpn
Contents/Resources/cli….key
================================================================================
Tunnelblick Kext Policy Data:
net.tunnelblick.tun|Z2SG5H3HC8|Jonathan Bullard|1|5
net.tunnelblick.tap|Z2SG5H3HC8|Jonathan Bullard|1|5
================================================================================
Configuration preferences:
-routeAllTrafficThroughVpn = 1
-notOKToCheckThatIPAddressDidNotChangeAfterConnection = 0
-lastConnectionSucceeded = 0
================================================================================
Wildcard preferences:
-notOKToCheckThatIPAddressDidNotChangeAfterConnection = 0
================================================================================
Program preferences:
launchAtNextLogin = 1
tunnelblickVersionHistory = (
"4.0.0beta07 (build 5870)",
"4.0.0beta06 (build 5860)",
"3.8.8beta04 (build 5800)",
"3.8.8beta03 (build 5790)",
"3.8.7beta03 (build 5740)",
"3.8.6a (build 5711)",
"3.8.2a (build 5481)",
"3.8.2 (build 5480)",
"3.8.1 (build 5400)",
"3.8.0 (build 5370)"
)
statusDisplayNumber = 0
lastLaunchTime = 713502032.423208
lastLanguageAtLaunchWasRTL = 0
connectionWindowDisplayCriteria = showWhenConnecting
maxLogDisplaySize = 102400
lastConnectedDisplayName = new_vpnConfig
keyboardShortcutIndex = 1
updateCheckAutomatically = 1
NSWindow Frame SettingsSheetWindow = 702 531 829 548 0 0 1728 1079
NSWindow Frame ConnectingWindow = 669 661 389 217 0 0 1728 1079
NSWindow Frame SUStatusFrame = 664 722 400 135 0 0 1728 1079
NSWindow Frame SUUpdateAlert = 554 529 620 392 0 0 1728 1079
detailsWindowFrameVersion = 5870
detailsWindowFrame = {{404, 435}, {920, 522}}
detailsWindowLeftFrame = {{0, 0}, {167, 402}}
detailsWindowViewIndex = 0
detailsWindowConfigurationsTabIdentifier = log
leftNavSelectedDisplayName = new_vpnConfig
AdvancedWindowTabIdentifier = connectingAndDisconnecting
haveDealtWithOldTunTapPreferences = 1
haveDealtWithAlwaysShowLoginWindow = 1
haveDealtWithOldLoginItem = 1
haveDealtWithAfterDisconnect = 1
SUEnableAutomaticChecks = 1
SUScheduledCheckInterval = 86400
SULastCheckTime = 2023-08-12 03:11:11 +0000
SUHasLaunchedBefore = 1
bigSurCanLoadKexts = 1
================================================================================
Forced preferences:
{
"client-authenticateOnConnect" = 0;
}
================================================================================
Deployed forced preferences:
(None)
================================================================================
Tunnelblick Log:
2023-08-11 23:12:27.817897 *Tunnelblick: macOS 13.5 (22G74); Tunnelblick 4.0.0beta07 (build 5870); prior version 4.0.0beta06 (build 5860)
2023-08-11 23:12:28.125184 *Tunnelblick: Cannot recognize the new_vpnConfig-loadTap preference value of '(null)', so Tunnelblick will not load the tap kext
2023-08-11 23:12:28.238037 *Tunnelblick: Attempting connection with new_vpnConfig; Set nameserver = 0x00000301; monitoring connection
2023-08-11 23:12:28.238520 *Tunnelblick: openvpnstart start new_vpnConfig.tblk 57550 0x00000301 0 3 0 0x0210c370 -ptADGNWradsgnw 2.5.9-openssl-1.1.1v
2023-08-11 23:12:28.265376 *Tunnelblick: openvpnstart starting OpenVPN
2023-08-11 23:12:28.638221 WARNING: Compression for receiving enabled. Compression has been used in the past to break encryption. Sent packets are not compressed unless "allow-compression yes" is also set.
2023-08-11 23:12:28.639227 DEPRECATED OPTION: --cipher set to 'AES-128-CBC' but missing in --data-ciphers (AES-256-GCM:AES-128-GCM). Future OpenVPN version will ignore --cipher for cipher negotiations. Add 'AES-128-CBC' to --data-ciphers or change --cipher 'AES-128-CBC' to --data-ciphers-fallback 'AES-128-CBC' to silence this warning.
2023-08-11 23:12:28.639671 OpenVPN 2.5.9 x86_64-apple-darwin [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [MH/RECVDA] [AEAD] built on Aug 2 2023
2023-08-11 23:12:28.639699 library versions: OpenSSL 1.1.1v 1 Aug 2023, LZO 2.10
2023-08-11 23:12:28.642404 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:57550
2023-08-11 23:12:28.642437 Need hold release from management interface, waiting...
2023-08-11 23:12:28.864579 *Tunnelblick: openvpnstart log:
OpenVPN started successfully.
Command used to start OpenVPN (one argument per displayed line):
/Applications/Tunnelblick.app/Contents/Resources/openvpn/openvpn-2.5.9-openssl-1.1.1v/openvpn
--daemon
--log-append /Library/Application Support/Tunnelblick/Logs/-SLibrary-SApplication Support-STunnelblick-SShared-Snew_vpnConfig.tblk-SContents-SResources-Sconfig.ovpn.769_0_3_0_34653040.57550.openvpn.log
--cd /Library/Application Support/Tunnelblick/Shared/new_vpnConfig.tblk/Contents/Resources
--machine-readable-output
--setenv IV_GUI_VER "net.tunnelblick.tunnelblick 5870 4.0.0beta07 (build 5870)"
--verb 3
--config /Library/Application Support/Tunnelblick/Shared/new_vpnConfig.tblk/Contents/Resources/config.ovpn
--setenv TUNNELBLICK_CONFIG_FOLDER /Library/Application Support/Tunnelblick/Shared/new_vpnConfig.tblk/Contents/Resources
--verb 3
--cd /Library/Application Support/Tunnelblick/Shared/new_vpnConfig.tblk/Contents/Resources
--management 127.0.0.1 57550 /Library/Application Support/Tunnelblick/Mips/new_vpnConfig.tblk.mip
--management-query-passwords
--management-hold
--redirect-gateway def1
--script-security 2
--route-up /Applications/Tunnelblick.app/Contents/Resources/client.up.tunnelblick.sh -9 -a -d -f -m -w -ptADGNWradsgnw
--down /Applications/Tunnelblick.app/Contents/Resources/client.down.tunnelblick.sh -9 -a -d -f -m -w -ptADGNWradsgnw
--route-pre-down /Applications/Tunnelblick.app/Contents/Resources/client.route-pre-down.tunnelblick.sh -9 -a -d -f -m -w -ptADGNWradsgnw
2023-08-11 23:12:28.878278 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:57550
2023-08-11 23:12:28.911262 MANAGEMENT: CMD 'pid'
2023-08-11 23:12:28.913411 *Tunnelblick: Established communication with OpenVPN
2023-08-11 23:12:28.914583 MANAGEMENT: CMD 'auth-retry interact'
2023-08-11 23:12:28.914657 *Tunnelblick: >INFO:OpenVPN Management Interface Version 3 -- type 'help' for more info
2023-08-11 23:12:28.914682 MANAGEMENT: CMD 'state on'
2023-08-11 23:12:28.914706 MANAGEMENT: CMD 'state'
2023-08-11 23:12:28.914767 MANAGEMENT: CMD 'bytecount 1'
2023-08-11 23:12:28.934372 MANAGEMENT: CMD 'hold release'
2023-08-11 23:12:28.934533 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
2023-08-11 23:12:28.934549 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
2023-08-11 23:12:28.937220 MANAGEMENT: >STATE:1691809948,RESOLVE,,,,,,
2023-08-11 23:12:29.005099 TCP/UDP: Preserving recently used remote address: [AF_INET]104.63.201.88:12974
2023-08-11 23:12:29.005237 Socket Buffers: R=[786896->393216] S=[9216->393216]
2023-08-11 23:12:29.005259 UDP link local: (not bound)
2023-08-11 23:12:29.005274 UDP link remote: [AF_INET]104.63.201.88:12974
2023-08-11 23:12:29.005302 MANAGEMENT: >STATE:1691809949,WAIT,,,,,,
2023-08-11 23:12:29.096114 MANAGEMENT: >STATE:1691809949,AUTH,,,,,,
2023-08-11 23:12:29.096360 TLS: Initial packet from [AF_INET]104.63.201.88:12974, sid=320e9631 952bf697
2023-08-11 23:12:29.184115 VERIFY OK: depth=1, C=TW, ST=TW, L=Taipei, O=netgear, OU=netgear, CN=netgear, emailAddress=[email protected]
2023-08-11 23:12:29.184641 VERIFY OK: depth=0, C=TW, ST=TW, O=netgear, OU=netgear, CN=netgear, emailAddress=[email protected]
2023-08-11 23:12:29.271173 Control Channel: TLSv1.3, cipher TLSv1.3 TLS_CHACHA20_POLY1305_SHA256, peer certificate: 1024 bit RSA, signature: RSA-SHA256
2023-08-11 23:12:29.271263 [netgear] Peer Connection Initiated with [AF_INET]104.63.201.88:12974
2023-08-11 23:12:30.370094 MANAGEMENT: >STATE:1691809950,GET_CONFIG,,,,,,
2023-08-11 23:12:30.370447 SENT CONTROL [netgear]: 'PUSH_REQUEST' (status=1)
2023-08-11 23:12:30.463466 PUSH: Received control message: 'PUSH_REPLY,sndbuf 393216,rcvbuf 393216,route 10.0.0.0 255.255.255.0,route-delay 5,route-gateway dhcp,ping 10,ping-restart 120,peer-id 0,cipher AES-256-GCM'
2023-08-11 23:12:30.463765 OPTIONS IMPORT: timers and/or timeouts modified
2023-08-11 23:12:30.463783 OPTIONS IMPORT: --sndbuf/--rcvbuf options modified
2023-08-11 23:12:30.463819 Socket Buffers: R=[393216->393216] S=[393216->393216]
2023-08-11 23:12:30.463838 OPTIONS IMPORT: route options modified
2023-08-11 23:12:30.463851 OPTIONS IMPORT: route-related options modified
2023-08-11 23:12:30.463861 OPTIONS IMPORT: peer-id set
2023-08-11 23:12:30.463872 OPTIONS IMPORT: adjusting link_mtu to 1657
2023-08-11 23:12:30.463883 OPTIONS IMPORT: data channel crypto options modified
2023-08-11 23:12:30.463900 Data Channel: using negotiated cipher 'AES-256-GCM'
2023-08-11 23:12:30.464023 Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
2023-08-11 23:12:30.464054 Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
2023-08-11 23:12:30.466090 MANAGEMENT: Client disconnected
2023-08-11 23:12:30.466113 Cannot allocate TUN/TAP dev dynamically
2023-08-11 23:12:30.466125 Exiting due to fatal error
2023-08-11 23:12:31.944979 *Tunnelblick: Expected disconnection occurred.
================================================================================
Down log:
09:30:00 *Tunnelblick: **********************************************
09:30:00 *Tunnelblick: Start of output from client.down.tunnelblick.sh
09:30:01 *Tunnelblick: WARNING: Not restoring network settings because no saved Tunnelblick DNS information was found.
09:30:01 *Tunnelblick: Flushed the DNS cache with dscacheutil -flushcache
09:30:01 *Tunnelblick: Notified mDNSResponder that the DNS cache was flushed
09:30:01 *Tunnelblick: End of output from client.down.tunnelblick.sh
09:30:01 *Tunnelblick: **********************************************
================================================================================
Previous down log:
10:54:15 *Tunnelblick: **********************************************
10:54:15 *Tunnelblick: Start of output from client.down.tunnelblick.sh
10:54:16 *Tunnelblick: WARNING: Not restoring network settings because no saved Tunnelblick DNS information was found.
10:54:16 *Tunnelblick: Flushed the DNS cache with dscacheutil -flushcache
10:54:16 *Tunnelblick: Notified mDNSResponder that the DNS cache was flushed
10:54:16 *Tunnelblick: Notified mDNSResponderHelper that the DNS cache was flushed
10:54:16 *Tunnelblick: End of output from client.down.tunnelblick.sh
10:54:16 *Tunnelblick: **********************************************
================================================================================
Network services:
An asterisk (*) denotes that a network service is disabled.
Wi-Fi
iPhone USB
Thunderbolt Bridge
Wi-Fi Power (en0): On
================================================================================
ifconfig output:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
anpi1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 52:74:b0:94:f9:b6
inet6 fe80::5074:b0ff:fe94:f9b6%anpi1 prefixlen 64 scopeid 0x4
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
anpi0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 52:74:b0:94:f9:b5
inet6 fe80::5074:b0ff:fe94:f9b5%anpi0 prefixlen 64 scopeid 0x5
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
anpi2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 52:74:b0:94:f9:b7
inet6 fe80::5074:b0ff:fe94:f9b7%anpi2 prefixlen 64 scopeid 0x6
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
en4: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 52:74:b0:94:f9:95
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
en5: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 52:74:b0:94:f9:96
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
en6: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 52:74:b0:94:f9:97
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=460<TSO4,TSO6,CHANNEL_IO>
ether 36:33:fb:28:67:80
media: autoselect
status: inactive
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=460<TSO4,TSO6,CHANNEL_IO>
ether 36:33:fb:28:67:84
media: autoselect
status: inactive
en3: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=460<TSO4,TSO6,CHANNEL_IO>
ether 36:33:fb:28:67:88
media: autoselect
status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=63<RXCSUM,TXCSUM,TSO4,TSO6>
ether 36:33:fb:28:67:80
Configuration:
id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
ipfilter disabled flags 0x0
member: en1 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 10 priority 0 path cost 0
member: en2 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 11 priority 0 path cost 0
member: en3 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 12 priority 0 path cost 0
nd6 options=201<PERFORMNUD,DAD>
media:
status: inactive
ap1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
ether f2:2f:4b:14:af:02
inet6 fe80::f02f:4bff:fe14:af02%ap1 prefixlen 64 scopeid 0xe
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
ether f0:2f:4b:14:af:02
inet6 fe80::c61:132b:9d4b:62e7%en0 prefixlen 64 secured scopeid 0xf
inet 192.168.7.243 netmask 0xffffff00 broadcast 192.168.7.255
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
awdl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
ether 52:4e:23:f5:b1:5d
inet6 fe80::504e:23ff:fef5:b15d%awdl0 prefixlen 64 scopeid 0x10
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
llw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 52:4e:23:f5:b1:5d
inet6 fe80::504e:23ff:fef5:b15d%llw0 prefixlen 64 scopeid 0x11
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: inactive
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::a1e:4b43:6772:6fd2%utun0 prefixlen 64 scopeid 0x12
nd6 options=201<PERFORMNUD,DAD>
utun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
inet6 fe80::3599:ad6:260a:d1ee%utun1 prefixlen 64 scopeid 0x13
nd6 options=201<PERFORMNUD,DAD>
utun2: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1000
inet6 fe80::ce81:b1c:bd2c:69e%utun2 prefixlen 64 scopeid 0x14
nd6 options=201<PERFORMNUD,DAD>
utun3: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::2426:7846:5c43:cb07%utun3 prefixlen 64 scopeid 0x15
nd6 options=201<PERFORMNUD,DAD>
utun4: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::5cda:3166:e6b4:e2dc%utun4 prefixlen 64 scopeid 0x16
nd6 options=201<PERFORMNUD,DAD>
utun5: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::7bc7:4f42:ec06:6b8d%utun5 prefixlen 64 scopeid 0x17
nd6 options=201<PERFORMNUD,DAD>
utun6: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::7ca6:b88f:c745:b3ab%utun6 prefixlen 64 scopeid 0x18
nd6 options=201<PERFORMNUD,DAD>
utun7: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1400
================================================================================
Non-Apple kexts that are loaded:
Index Refs Address Size Wired Name (Version) UUID
================================================================================
Quit Log:
2023-08-11 22:58:04.991700 applicationShouldTerminate: termination because of restart; delayed until 'shutdownTunnelblick' finishes)
2023-08-11 22:58:04.996513 shutDownTunnelblick: started.
2023-08-11 22:58:04.996851 shutDownTunnelblick: Starting cleanup.
2023-08-11 22:58:04.997357 cleanup: Entering cleanup
2023-08-11 22:58:05.004190 synchronized user defaults
2023-08-11 22:58:05.580996 Set up flag files for shutting down the computer and expecting all configurations to be disconnected
2023-08-11 22:58:05.583915 doDisconnectionsForShuttingDownComputer: Set 'expect disconnect 1 ALL'
2023-08-11 22:58:05.591787 Started disconnecting all configurations
2023-08-11 22:58:05.592355 Skipping cleanup because computer is shutting down or restarting
2023-08-11 22:58:05.597883 shutDownTunnelblick: Cleanup finished.
2023-08-11 22:58:05.598554 Finished shutting down Tunnelblick; allowing termination
================================================================================
Traces Log:
================================================================================
Console Log:
from tunnelblick.
jkbullard
commented on June 2, 2024
Try 4.0.0beta08, or revert to 3.8.8b. They are available on the Downloads and Deprecated Downloads pages, respectively.
from tunnelblick.
sharperer
commented on June 2, 2024
*Tunnelblick: macOS 13.5 (22G74); Tunnelblick 4.0.0beta08 (build 5880); prior version 4.0.0beta06 (build 5860); Admin user
git commit 1a154f3
The Tunnelblick.app process is not being translated (arm64)
System Integrity Protection is enabled
Model: MacBookPro18,2
Configuration new_vpnConfig
"Sanitized" condensed configuration file for /Library/Application Support/Tunnelblick/Shared/new_vpnConfig.tblk:
client
dev tap
proto udp
sndbuf 393216
rcvbuf 393216
push "sndbuf 393216"
push "rcvbuf 393216"
remote swharper.ddns.net 12974
resolv-retry infinite
nobind
persist-key
persist-tun
ca ca.crt
cert client.crt
key client.key
cipher AES-128-CBC
comp-lzo
verb 0
================================================================================
Files in new_vpnConfig.tblk:
Contents/Resources/cli….crt
Contents/Resources/ca.crt
Contents/Resources/config.ovpn
Contents/Resources/cli….key
================================================================================
Tunnelblick Kext Policy Data:
net.tunnelblick.tun|Z2SG5H3HC8|Jonathan Bullard|1|5
net.tunnelblick.tap|Z2SG5H3HC8|Jonathan Bullard|1|5
================================================================================
Configuration preferences:
-routeAllTrafficThroughVpn = 1
-notOKToCheckThatIPAddressDidNotChangeAfterConnection = 0
-lastConnectionSucceeded = 0
================================================================================
Wildcard preferences:
-notOKToCheckThatIPAddressDidNotChangeAfterConnection = 0
================================================================================
Program preferences:
launchAtNextLogin = 1
tunnelblickVersionHistory = (
"4.0.0beta08 (build 5880)",
"4.0.0beta07 (build 5870)",
"4.0.0beta06 (build 5860)",
"3.8.8beta04 (build 5800)",
"3.8.8beta03 (build 5790)",
"3.8.7beta03 (build 5740)",
"3.8.6a (build 5711)",
"3.8.2a (build 5481)",
"3.8.2 (build 5480)",
"3.8.1 (build 5400)"
)
statusDisplayNumber = 0
lastLaunchTime = 713503400.59971
lastLanguageAtLaunchWasRTL = 0
connectionWindowDisplayCriteria = showWhenConnecting
maxLogDisplaySize = 102400
lastConnectedDisplayName = new_vpnConfig
keyboardShortcutIndex = 1
updateCheckAutomatically = 1
NSWindow Frame SettingsSheetWindow = 702 531 829 548 0 0 1728 1079
NSWindow Frame ConnectingWindow = 669 660 389 217 0 0 1728 1079
NSWindow Frame SUStatusFrame = 664 722 400 135 0 0 1728 1079
NSWindow Frame SUUpdateAlert = 554 529 620 392 0 0 1728 1079
detailsWindowFrameVersion = 5870
detailsWindowFrame = {{595, 391}, {920, 522}}
detailsWindowLeftFrame = {{0, 0}, {167, 402}}
detailsWindowViewIndex = 0
detailsWindowConfigurationsTabIdentifier = log
leftNavSelectedDisplayName = new_vpnConfig
AdvancedWindowTabIdentifier = connectingAndDisconnecting
haveDealtWithOldTunTapPreferences = 1
haveDealtWithAlwaysShowLoginWindow = 1
haveDealtWithOldLoginItem = 1
haveDealtWithAfterDisconnect = 1
SUEnableAutomaticChecks = 1
SUScheduledCheckInterval = 86400
SULastCheckTime = 2023-08-12 03:23:21 +0000
SUHasLaunchedBefore = 1
bigSurCanLoadKexts = 1
================================================================================
Forced preferences:
{
"client-authenticateOnConnect" = 0;
}
================================================================================
Deployed forced preferences:
(None)
================================================================================
Tunnelblick Log:
2023-08-11 23:23:24.154203 *Tunnelblick: macOS 13.5 (22G74); Tunnelblick 4.0.0beta08 (build 5880); prior version 4.0.0beta06 (build 5860)
2023-08-11 23:23:24.300497 *Tunnelblick: Cannot recognize the new_vpnConfig-loadTap preference value of '(null)', so Tunnelblick will not load the tap kext
2023-08-11 23:23:24.333031 *Tunnelblick: Attempting connection with new_vpnConfig; Set nameserver = 0x00000301; monitoring connection
2023-08-11 23:23:24.334030 *Tunnelblick: openvpnstart start new_vpnConfig.tblk 63807 0x00000301 0 3 0 0x0210c370 -ptADGNWradsgnw 2.5.9-openssl-1.1.1v
2023-08-11 23:23:24.368623 *Tunnelblick: openvpnstart starting OpenVPN
2023-08-11 23:23:24.740224 WARNING: Compression for receiving enabled. Compression has been used in the past to break encryption. Sent packets are not compressed unless "allow-compression yes" is also set.
2023-08-11 23:23:24.740577 DEPRECATED OPTION: --cipher set to 'AES-128-CBC' but missing in --data-ciphers (AES-256-GCM:AES-128-GCM). Future OpenVPN version will ignore --cipher for cipher negotiations. Add 'AES-128-CBC' to --data-ciphers or change --cipher 'AES-128-CBC' to --data-ciphers-fallback 'AES-128-CBC' to silence this warning.
2023-08-11 23:23:24.741054 OpenVPN 2.5.9 x86_64-apple-darwin [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [MH/RECVDA] [AEAD] built on Aug 4 2023
2023-08-11 23:23:24.741083 library versions: OpenSSL 1.1.1v 1 Aug 2023, LZO 2.10
2023-08-11 23:23:24.742529 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:63807
2023-08-11 23:23:24.742557 Need hold release from management interface, waiting...
2023-08-11 23:23:24.959529 *Tunnelblick: openvpnstart log:
OpenVPN started successfully.
Command used to start OpenVPN (one argument per displayed line):
/Applications/Tunnelblick.app/Contents/Resources/openvpn/openvpn-2.5.9-openssl-1.1.1v/openvpn
--daemon
--log-append /Library/Application Support/Tunnelblick/Logs/-SLibrary-SApplication Support-STunnelblick-SShared-Snew_vpnConfig.tblk-SContents-SResources-Sconfig.ovpn.769_0_3_0_34653040.63807.openvpn.log
--cd /Library/Application Support/Tunnelblick/Shared/new_vpnConfig.tblk/Contents/Resources
--machine-readable-output
--setenv IV_GUI_VER "net.tunnelblick.tunnelblick 5880 4.0.0beta08 (build 5880)"
--verb 3
--config /Library/Application Support/Tunnelblick/Shared/new_vpnConfig.tblk/Contents/Resources/config.ovpn
--setenv TUNNELBLICK_CONFIG_FOLDER /Library/Application Support/Tunnelblick/Shared/new_vpnConfig.tblk/Contents/Resources
--verb 3
--cd /Library/Application Support/Tunnelblick/Shared/new_vpnConfig.tblk/Contents/Resources
--management 127.0.0.1 63807 /Library/Application Support/Tunnelblick/Mips/new_vpnConfig.tblk.mip
--management-query-passwords
--management-hold
--redirect-gateway def1
--script-security 2
--route-up /Applications/Tunnelblick.app/Contents/Resources/client.up.tunnelblick.sh -9 -a -d -f -m -w -ptADGNWradsgnw
--down /Applications/Tunnelblick.app/Contents/Resources/client.down.tunnelblick.sh -9 -a -d -f -m -w -ptADGNWradsgnw
--route-pre-down /Applications/Tunnelblick.app/Contents/Resources/client.route-pre-down.tunnelblick.sh -9 -a -d -f -m -w -ptADGNWradsgnw
2023-08-11 23:23:24.972914 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:63807
2023-08-11 23:23:25.021988 *Tunnelblick: Established communication with OpenVPN
2023-08-11 23:23:25.024553 MANAGEMENT: CMD 'pid'
2023-08-11 23:23:25.024648 MANAGEMENT: CMD 'auth-retry interact'
2023-08-11 23:23:25.024699 MANAGEMENT: CMD 'state on'
2023-08-11 23:23:25.024743 MANAGEMENT: CMD 'state'
2023-08-11 23:23:25.024834 MANAGEMENT: CMD 'bytecount 1'
2023-08-11 23:23:25.036655 *Tunnelblick: >INFO:OpenVPN Management Interface Version 3 -- type 'help' for more info
2023-08-11 23:23:25.037876 MANAGEMENT: CMD 'hold release'
2023-08-11 23:23:25.041174 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
2023-08-11 23:23:25.041250 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
2023-08-11 23:23:25.044697 MANAGEMENT: >STATE:1691810605,RESOLVE,,,,,,
2023-08-11 23:23:25.110520 TCP/UDP: Preserving recently used remote address: [AF_INET]104.63.201.88:12974
2023-08-11 23:23:25.110614 Socket Buffers: R=[786896->393216] S=[9216->393216]
2023-08-11 23:23:25.110634 UDP link local: (not bound)
2023-08-11 23:23:25.110648 UDP link remote: [AF_INET]104.63.201.88:12974
2023-08-11 23:23:25.110674 MANAGEMENT: >STATE:1691810605,WAIT,,,,,,
2023-08-11 23:23:25.202412 MANAGEMENT: >STATE:1691810605,AUTH,,,,,,
2023-08-11 23:23:25.202539 TLS: Initial packet from [AF_INET]104.63.201.88:12974, sid=b2388630 4061fb7f
2023-08-11 23:23:25.307549 VERIFY OK: depth=1, C=TW, ST=TW, L=Taipei, O=netgear, OU=netgear, CN=netgear, emailAddress=[email protected]
2023-08-11 23:23:25.308976 VERIFY OK: depth=0, C=TW, ST=TW, O=netgear, OU=netgear, CN=netgear, emailAddress=[email protected]
2023-08-11 23:23:25.404187 Control Channel: TLSv1.3, cipher TLSv1.3 TLS_CHACHA20_POLY1305_SHA256, peer certificate: 1024 bit RSA, signature: RSA-SHA256
2023-08-11 23:23:25.404413 [netgear] Peer Connection Initiated with [AF_INET]104.63.201.88:12974
2023-08-11 23:23:26.604141 MANAGEMENT: >STATE:1691810606,GET_CONFIG,,,,,,
2023-08-11 23:23:26.604405 SENT CONTROL [netgear]: 'PUSH_REQUEST' (status=1)
2023-08-11 23:23:26.705718 PUSH: Received control message: 'PUSH_REPLY,sndbuf 393216,rcvbuf 393216,route 10.0.0.0 255.255.255.0,route-delay 5,route-gateway dhcp,ping 10,ping-restart 120,peer-id 0,cipher AES-256-GCM'
2023-08-11 23:23:26.706342 OPTIONS IMPORT: timers and/or timeouts modified
2023-08-11 23:23:26.706368 OPTIONS IMPORT: --sndbuf/--rcvbuf options modified
2023-08-11 23:23:26.706407 Socket Buffers: R=[393216->393216] S=[393216->393216]
2023-08-11 23:23:26.706419 OPTIONS IMPORT: route options modified
2023-08-11 23:23:26.706430 OPTIONS IMPORT: route-related options modified
2023-08-11 23:23:26.706440 OPTIONS IMPORT: peer-id set
2023-08-11 23:23:26.706453 OPTIONS IMPORT: adjusting link_mtu to 1657
2023-08-11 23:23:26.706464 OPTIONS IMPORT: data channel crypto options modified
2023-08-11 23:23:26.706479 Data Channel: using negotiated cipher 'AES-256-GCM'
2023-08-11 23:23:26.706714 Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
2023-08-11 23:23:26.706733 Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
2023-08-11 23:23:26.709822 MANAGEMENT: Client disconnected
2023-08-11 23:23:26.709858 Cannot allocate TUN/TAP dev dynamically
2023-08-11 23:23:26.709868 Exiting due to fatal error
2023-08-11 23:23:28.345529 *Tunnelblick: Expected disconnection occurred.
================================================================================
Down log:
09:30:00 *Tunnelblick: **********************************************
09:30:00 *Tunnelblick: Start of output from client.down.tunnelblick.sh
09:30:01 *Tunnelblick: WARNING: Not restoring network settings because no saved Tunnelblick DNS information was found.
09:30:01 *Tunnelblick: Flushed the DNS cache with dscacheutil -flushcache
09:30:01 *Tunnelblick: Notified mDNSResponder that the DNS cache was flushed
09:30:01 *Tunnelblick: End of output from client.down.tunnelblick.sh
09:30:01 *Tunnelblick: **********************************************
================================================================================
Previous down log:
10:54:15 *Tunnelblick: **********************************************
10:54:15 *Tunnelblick: Start of output from client.down.tunnelblick.sh
10:54:16 *Tunnelblick: WARNING: Not restoring network settings because no saved Tunnelblick DNS information was found.
10:54:16 *Tunnelblick: Flushed the DNS cache with dscacheutil -flushcache
10:54:16 *Tunnelblick: Notified mDNSResponder that the DNS cache was flushed
10:54:16 *Tunnelblick: Notified mDNSResponderHelper that the DNS cache was flushed
10:54:16 *Tunnelblick: End of output from client.down.tunnelblick.sh
10:54:16 *Tunnelblick: **********************************************
================================================================================
Network services:
An asterisk (*) denotes that a network service is disabled.
Wi-Fi
iPhone USB
Thunderbolt Bridge
Wi-Fi Power (en0): On
================================================================================
ifconfig output:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
anpi1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 52:74:b0:94:f9:b6
inet6 fe80::5074:b0ff:fe94:f9b6%anpi1 prefixlen 64 scopeid 0x4
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
anpi0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 52:74:b0:94:f9:b5
inet6 fe80::5074:b0ff:fe94:f9b5%anpi0 prefixlen 64 scopeid 0x5
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
anpi2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 52:74:b0:94:f9:b7
inet6 fe80::5074:b0ff:fe94:f9b7%anpi2 prefixlen 64 scopeid 0x6
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
en4: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 52:74:b0:94:f9:95
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
en5: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 52:74:b0:94:f9:96
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
en6: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 52:74:b0:94:f9:97
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=460<TSO4,TSO6,CHANNEL_IO>
ether 36:33:fb:28:67:80
media: autoselect
status: inactive
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=460<TSO4,TSO6,CHANNEL_IO>
ether 36:33:fb:28:67:84
media: autoselect
status: inactive
en3: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=460<TSO4,TSO6,CHANNEL_IO>
ether 36:33:fb:28:67:88
media: autoselect
status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=63<RXCSUM,TXCSUM,TSO4,TSO6>
ether 36:33:fb:28:67:80
Configuration:
id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
ipfilter disabled flags 0x0
member: en1 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 10 priority 0 path cost 0
member: en2 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 11 priority 0 path cost 0
member: en3 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 12 priority 0 path cost 0
nd6 options=201<PERFORMNUD,DAD>
media:
status: inactive
ap1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
ether f2:2f:4b:14:af:02
inet6 fe80::f02f:4bff:fe14:af02%ap1 prefixlen 64 scopeid 0xe
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
ether f0:2f:4b:14:af:02
inet6 fe80::c61:132b:9d4b:62e7%en0 prefixlen 64 secured scopeid 0xf
inet 192.168.7.243 netmask 0xffffff00 broadcast 192.168.7.255
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
awdl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
ether ce:b1:db:2c:cf:8d
inet6 fe80::ccb1:dbff:fe2c:cf8d%awdl0 prefixlen 64 scopeid 0x10
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
llw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether ce:b1:db:2c:cf:8d
inet6 fe80::ccb1:dbff:fe2c:cf8d%llw0 prefixlen 64 scopeid 0x11
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: inactive
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::a1e:4b43:6772:6fd2%utun0 prefixlen 64 scopeid 0x12
nd6 options=201<PERFORMNUD,DAD>
utun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
inet6 fe80::3599:ad6:260a:d1ee%utun1 prefixlen 64 scopeid 0x13
nd6 options=201<PERFORMNUD,DAD>
utun2: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1000
inet6 fe80::ce81:b1c:bd2c:69e%utun2 prefixlen 64 scopeid 0x14
nd6 options=201<PERFORMNUD,DAD>
utun3: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::2426:7846:5c43:cb07%utun3 prefixlen 64 scopeid 0x15
nd6 options=201<PERFORMNUD,DAD>
utun4: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::5cda:3166:e6b4:e2dc%utun4 prefixlen 64 scopeid 0x16
nd6 options=201<PERFORMNUD,DAD>
utun5: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::7bc7:4f42:ec06:6b8d%utun5 prefixlen 64 scopeid 0x17
nd6 options=201<PERFORMNUD,DAD>
utun6: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::7ca6:b88f:c745:b3ab%utun6 prefixlen 64 scopeid 0x18
nd6 options=201<PERFORMNUD,DAD>
utun7: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1400
================================================================================
Non-Apple kexts that are loaded:
Index Refs Address Size Wired Name (Version) UUID
================================================================================
Quit Log:
2023-08-11 23:23:07.929471 applicationShouldTerminate: termination because of Quit; delayed until 'shutdownTunnelblick' finishes)
2023-08-11 23:23:07.947461 shutDownTunnelblick: started.
2023-08-11 23:23:07.947884 shutDownTunnelblick: Starting cleanup.
2023-08-11 23:23:07.948088 cleanup: Entering cleanup
2023-08-11 23:23:07.948267 cleanup aborted because Tunnelblick did not finish launching
2023-08-11 23:23:07.948432 shutDownTunnelblick: Cleanup finished.
2023-08-11 23:23:07.948601 Finished shutting down Tunnelblick; allowing termination
================================================================================
Traces Log:
================================================================================
Console Log:
from tunnelblick.
kzolnowski
commented on June 2, 2024
Hi,
I had the same issue. In my case I fixed it by change setting from 'Load Tap driver automatically' to 'Always load Tap driver' in Advanced connection settings. After this change works like a charm on 4.0.0beta07
from tunnelblick.
Related Issues (20)
- My Tunnelblick config file stopped working all of a sudden HOT 1
- How to trigger an OTP to be sent from VPN server at start of a connection attempt? HOT 17
- An error occurred when using the configuration file of aws clientvpn HOT 2
- Dynamic challenge script AUTH_FAILED HOT 12
- Username with space improperly handled HOT 7
- Tunnelblick 4.0.0 not able to connect HOT 10
- Losing local DNS configuration on tunnel disconnect HOT 10
- TunnelBlick 4.0.0 - asking for passphrase with openssl 3.0.13 but no passphrase is required HOT 15
- "This copy of Tunnelblick has been tampered with" when restarting Tunnelblick after using VPN profile for first time HOT 7
- Asking for pass phrase when there is none defined for the connection HOT 1
- Apple just released TN3158, is Tunnelblick affected by anything they wrote? HOT 2
- Ping in IPv6 works, no web requests
- Tunnelblick does not start automatically HOT 6
- The icon width for top menu bar HOT 3
- When I connected to VPN I lose internet access HOT 1
- Upgrade to Macos or Tunnelblick has broken my VPN connection HOT 2
- IPv4 routes not created in dual-stack setup HOT 1
- Tunnelblick don't use the content of auth_failed_reason_file
- Tunnelblick not working on older macs with Sonoma 14.4.1 (OpenCore Patcher) HOT 1
- [Feature Req'] Whitelist/Blacklist which apps go via the vpn. HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from tunnelblick.