Carbon6 i5 tutorial

[JackokieZhao]

Carbon6 i5 tutorial

[AutinMitra]

OpenCore should be at (USB) /EFI/OC

Did you configure your BIOS to the same as the guide?

Also, if your SSD model is the PM981 (I believe the standard SSD for the machine), the installer will crash on your machine.

I don't believe there is any difference for the configs between i5 and i7, other than regenerating CPUFriend for your i5.

Also, you might need BrcmPatchRam to get Bluetooth to work.

[tylernguyen]

@JackokieZhao Just as @AutinMitra said, there should be no functional differences from the i5 and i7 model other than regenerating your own CPUFriendDataProvider.

Other than that, my project is fairly well documented so please take your time and read through these documentations:
https://github.com/tylernguyen/x1c6-hackintosh/tree/master/docs

If your hard drive is the PM981, please refer to #43

Additionally, the DW1820A will need https://github.com/tylernguyen/x1c6-hackintosh/blob/master/patches/OpenCore%20Patches/Config-DW1820A.plist added to the current OpenCore EFI.
Be sure to also add the required kexts listed in the patch.

Regarding OpenCore configurations, please firstly familiarize yourself with general hackintosh installations and configuration procedures, here are some resources to do so:
https://dortania.github.io/vanilla-laptop-guide/
https://dortania.github.io/oc-laptop-guide/

I am more than willing to answer specific questions, but the rest is up to you.

[JackokieZhao]

font{ line-height: 1.6; } ul,ol{ padding-left: 20px; list-style-position: inside; } Thanks for your answer.I have installed the Mac system on my carbon.However, there remains two problem I can’t resolve.The graphic card can’t work. The bottom of the screen is always black. I don’t know whether it’s the reason of 4K. And all the browser(Firefox, safari, chrome) is so slow….The other problem is the audio can’t work. I have add the layout_id 21 or 11 to the configure list. But it still can’t work.Thanks again for your help! font{ line-height: 1.6; } Best regards,Jackokie（Jiwei） Zhao-------------------------------------------------------------------------------------------Mobile: [phone]Email: [email protected]: http://www.jackokie.comAddress: School of electronic science and engineering, Nanjing University，Xianlin Avenue Nanjing No. 163 Electronic Building (Panzhong to floor) 210093 On 05/12/2020 11:37，Tyler Nguyen<[email protected]> wrote： @JackokieZhao Just as @AutinMitra said, there should be no functional differences from the i5 and i7 model other than regenerating your own CPUFriendDataProvider. Other than that, my project is fairly well documented so please take your time and read through these documentations: https://github.com/tylernguyen/x1c6-hackintosh/tree/master/docs Additionally, the DW1820A will need https://github.com/tylernguyen/x1c6-hackintosh/blob/master/patches/OpenCore%20Patches/Config-DW1820A.plist added to the current OpenCore EFI. Be sure to also add the required kexts listed in the patch. Regarding OpenCore configurations, please firstly familiarize yourself with general hackintosh installations and configuration procedures, here are some resources to do so: https://dortania.github.io/vanilla-laptop-guide/ https://dortania.github.io/oc-laptop-guide/ I am more than willing to answer specific questions, but the rest is up to you. —You are receiving this because you were mentioned.Reply to this email directly, view it on GitHub, or unsubscribe.

[tylernguyen]

Thanks for your answer.I have installed the Mac system on my carbon.However, there remains two problem I can’t resolve.The graphic card can’t work. The bottom of the screen is always black. I don’t know whether it’s the reason of 4K. And all the browser(Firefox, safari, chrome) is so slow….The other problem is the audio can’t work. I have add the layout_id 21 or 11 to the configure list. But it still can’t work.Thanks again for your help!

You need to check the specs of the graphics card and your audio layout. It maybe that your processor uses a different graphics chip than the UHD 620 my EFI folder is intended for. Similarly, my EFI is configured for ALC285 sound, you need to check if this is different from yours. Lastly, please make sure that your config.plist is configured properly, if you're using OpenCore, you can do so here:

https://opencore.slowgeek.com/