ZeroTier connection

[uavpal]

ZeroTier connection

you can run /data/ftp/uavpal/bin/zerotier-one -q status to check its status. You need to telnet to your disco first via Wi-Fi from a PC.

[Thyristornp]

I have this message:

/ # /data/ftp/uavpal/bin/zerotier-one -q status
200 info 460e4f9dde 1.2.6 ONLINE

But, there is no connection in https://my.zerotier.com/network

The address 460e4f9dde is the same as in zerotier page, but I see that the member is offline.

he status in the Web UI is not always accurate (however most of the time it is). Can you see an IPv4 address assigned to the members? Can they ping each other? Do you get steady blue LED on the controller?

[Thyristornp]

Yesterday I reinstalled soft mod. Blue LED on the controller is blinking blue after connection to phone wifi, but I can't Authorize it, because can't see it on Web UI. There is no bridge between Disco and conroller.

Before reinstall, I have once saw controller on Web UI and enabled "Auth?" and enabled bridging, but I had got the same problem - blue was blinking.

did you ever delete a member for a network ID in the zerotier UI?

Can you join the community on https://uavpal.com/slack and upload a screenshot of your zerotier account (network tab)?
Thanks,
SoftIce

can I close this issue?

[ct1ftk]

I have already installed everything and configured it as described and I am almost giving up on this solution because I can not establish communication with "ZEROTIER" (between Disk and SC2). I have spent many hours in experiments and tests, I have spent too many hours of rest. I'm saturated!
Please, anybody can help me?
Thanks,
Henrique Manso

[ct1ftk]

See the screenshot in attach:

all resolved now? can I close this issue?

[ct1ftk]

Yes you can close. Thanks for all.

[mysaidi007]

I have same issue can someone help me

[s0ftice]

please ask on slack in #Disco4G for help

[mysaidi007]

Do you have the link?

[s0ftice]

https://uavpal.com/slack

[mysaidi007]

Already join found nothing

[mysaidi007]

Can you give me the link direct to the disco 4g issue

[s0ftice]

If you don't ask for help on Slack, people wouldn't know you need some :)

[kimkabsoo]

HI !
I have bebop2

Blue LED on the controller is blinking blue after connection to phone wifi, but I can't Authorize it

I have this telnet message:
/ # /data/ftp/uavpal/bin/zerotier-one -q status

/data/ftp/uavpal/bin/zerotier-one: missing port and zerotier-one.port not found in /var/lib/zerotier-one

Tell me how to solve it

[s0ftice]

Please join us on Slack for installation troubleshooting