unifreq / linux-5.4.y Goto Github PK
View Code? Open in Web Editor NEWlinux 5.4.y source, And added some patches that I have collected, which can be used for the openwrt firmware I released, or for general occasions such as armbian.
License: Other
linux 5.4.y source, And added some patches that I have collected, which can be used for the openwrt firmware I released, or for general occasions such as armbian.
License: Other
Linux kernel ============ There are several guides for kernel developers and users. These guides can be rendered in a number of formats, like HTML and PDF. Please read Documentation/admin-guide/README.rst first. In order to build the documentation, use ``make htmldocs`` or ``make pdfdocs``. The formatted documentation can also be read online at: https://www.kernel.org/doc/html/latest/ There are various text files in the Documentation/ subdirectory, several of them using the Restructured Text markup notation. Please read the Documentation/process/changes.rst file, as it contains the requirements for building and running the kernel, and information about the problems which may result by upgrading your kernel.
please update wireless driver rtl8189fs especially for kernel 5.4.y & 5.15.y now another update is available
大佬你好,我看了下你其他几个内核,都对rtl8761b做了支持,5.4.y是遗漏了还是无法支持?如果是遗漏的话,辛苦大佬支持下 :-)
感谢F大为电视盒子开启更多玩法,但如x96max+无线未能驱动实在有点可惜,方便时麻烦测试看看
大致对比一下代码RTL8822CS驱动貌似还与应用平台设置有关,详见如下:
https://github.com/CoreELEC/RTL8822CS-aml
--p-amlogic_9.2.1811_21
--amlogic-5.4.125--也比较新
其中“../rtl88x2cs/Makefile”中,例如CONFIG_PLATFORM_AML_S905 = y
【1】https://github.com/CoreELEC/RTL8822CS-aml/blob/aecc07c6b90bb776bd569159067da5c985c92458/rtl88x2CS/Makefile#L206
###################### Platform Related #######################
CONFIG_PLATFORM_I386_PC = n
CONFIG_PLATFORM_ANDROID_X86 = n
CONFIG_PLATFORM_ANDROID_INTEL_X86 = n
CONFIG_PLATFORM_JB_X86 = n
CONFIG_PLATFORM_ARM_S3C2K4 = n
CONFIG_PLATFORM_ARM_PXA2XX = n
CONFIG_PLATFORM_ARM_S3C6K4 = n
CONFIG_PLATFORM_MIPS_RMI = n
CONFIG_PLATFORM_RTD2880B = n
CONFIG_PLATFORM_MIPS_AR9132 = n
CONFIG_PLATFORM_RTK_DMP = n
CONFIG_PLATFORM_MIPS_PLM = n
CONFIG_PLATFORM_MSTAR389 = n
CONFIG_PLATFORM_MT53XX = n
CONFIG_PLATFORM_ARM_MX51_241H = n
CONFIG_PLATFORM_FS_MX61 = n
CONFIG_PLATFORM_ACTIONS_ATJ227X = n
CONFIG_PLATFORM_TEGRA3_CARDHU = n
CONFIG_PLATFORM_TEGRA4_DALMORE = n
CONFIG_PLATFORM_ARM_TCC8900 = n
CONFIG_PLATFORM_ARM_TCC8920 = n
CONFIG_PLATFORM_ARM_TCC8920_JB42 = n
CONFIG_PLATFORM_ARM_TCC8930_JB42 = n
CONFIG_PLATFORM_ARM_RK2818 = n
CONFIG_PLATFORM_ARM_RK3066 = n
CONFIG_PLATFORM_ARM_RK3188 = n
CONFIG_PLATFORM_ARM_URBETTER = n
CONFIG_PLATFORM_ARM_TI_PANDA = n
CONFIG_PLATFORM_MIPS_JZ4760 = n
CONFIG_PLATFORM_DMP_PHILIPS = n
CONFIG_PLATFORM_MSTAR_TITANIA12 = n
CONFIG_PLATFORM_MSTAR = n
CONFIG_PLATFORM_SZEBOOK = n
CONFIG_PLATFORM_ARM_SUNxI = n
CONFIG_PLATFORM_ARM_SUN6I = n
CONFIG_PLATFORM_ARM_SUN7I = n
CONFIG_PLATFORM_ARM_SUN8I_W3P1 = n
CONFIG_PLATFORM_ARM_SUN8I_W5P1 = n
CONFIG_PLATFORM_ACTIONS_ATM702X = n
CONFIG_PLATFORM_ACTIONS_ATV5201 = n
CONFIG_PLATFORM_ACTIONS_ATM705X = n
CONFIG_PLATFORM_ARM_SUN50IW1P1 = n
CONFIG_PLATFORM_ARM_RTD299X = n
CONFIG_PLATFORM_ARM_LGE = n
CONFIG_PLATFORM_ARM_SPREADTRUM_6820 = n
CONFIG_PLATFORM_ARM_SPREADTRUM_8810 = n
CONFIG_PLATFORM_ARM_WMT = n
CONFIG_PLATFORM_TI_DM365 = n
CONFIG_PLATFORM_MOZART = n
CONFIG_PLATFORM_RTK119X = n
CONFIG_PLATFORM_RTK119X_AM = n
CONFIG_PLATFORM_RTK129X = n
CONFIG_PLATFORM_RTK1319 = n
CONFIG_PLATFORM_RTK390X = n
CONFIG_PLATFORM_NOVATEK_NT72668 = n
CONFIG_PLATFORM_HISILICON = n
CONFIG_PLATFORM_HISILICON_HI3798 = n
CONFIG_PLATFORM_NV_TK1 = n
CONFIG_PLATFORM_NV_TK1_UBUNTU = n
CONFIG_PLATFORM_RTL8197D = n
CONFIG_PLATFORM_AML_S905 = y
CONFIG_PLATFORM_ZTE_ZX296716 = n
【2】https://github.com/unifreq/linux-2.5.4.y/blob/27fab380a16f072efa04d6d60ab42b87600be273/drivers/net/wireless/realtek/rtl88x2cs/Makefile#L199
例如:
CONFIG_PLATFORM_I386_PC = y
...
CONFIG_PLATFORM_AML_S905 = n
etc.
找slimboxtv内核源码一直没有找到,哭哭
我现在在ubuntu x86上编译完内核后,不知道如何生成initrd.img
我查了很多资料,说是必须在目标机器(我是斐讯N1)上来生成initrd.img
所以我必须先在N1上安装一个armbian,再将modules拷贝到N1上,然后再通过update-initramfs
或者mkinitramfs
生成initrd.img,然后再用mkimage
制作uInitrd?
请问我的理解对不对?希望大佬能指点一二,谢谢!
恩山Flippy大佬已解答
已经通过 Amlogic_s905-kernel,成功编译内核和模块。
通过 this article to extract initrd.img-5.4.170-flippy-68+o
file which come from Flippy。
里面有内核模块,是5.4.170的。
因为内核 vermagic 问题,所以需要替换。
请问,不通过update-initramfs和arm64环境,在x86编译主机上(我用的是centos8),如何重新建立initrd.img。
另外,uboot是否对initrd和uimage进行校验?
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.