Incorrect/incomplete stl files in repo

[vorondesign]

Incorrect/incomplete stl files in repo

[UltraWaffles]

Thank you for the feedback, ill take a look

[kaibsora]

I have created an stl for the generic mount of the left block, based on your igus mount, if you would like it.

…

On Fri, Apr 15, 2022, 7:51 PM UltraWaffles ***@***.***> wrote: Thank you for the feedback, ill take a look — Reply to this email directly, view it on GitHub <#685 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AG4RJB5PSTZMVUFSZJYZWADVFH6HZANCNFSM5TMNSXFQ> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[UltraWaffles]

that would be cool if you could share that real quick

[kaibsora]

Z_bearing block_left_generic.zip
Here it is.

[UltraWaffles]

I updated the stls and added ur bearring block to the list. Did u make a z chain lower mount for generic chain by any chance?

[kaibsora]

I did not, i was going to use the one from the sw conversion, but i havent looked into seeing if there is a difference. did you have to modify it in your build? if so, i can modify it real quick

[UltraWaffles]

I only have a 2020 extrusion igus version. The original iirc, sticks out a bit

[kaibsora]

Ok. I'll update your version with the generic mounting holes, and post it here.

…

On Fri, Apr 15, 2022, 10:39 PM UltraWaffles ***@***.***> wrote: I only have a 2020 extrusion igus version. The original iirc, sticks out a bit — Reply to this email directly, view it on GitHub <#685 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AG4RJBYIRWJW2T755NS7X33VFIR7TANCNFSM5TMNSXFQ> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[kaibsora]

[a]_z_chain_lower_mount_generic.zip

[kaibsora]

I also just noticed that the x and z tensioners in your cad model are upside down. Not a huge issue, but something worth looking into

[kaibsora]

Also, there are apperantly 3 cuts in at least your left deck dxf and 2 cuts in your right dxf. I don't know how to fix that or if that's normal or not.

[FHeilmann]

Closing due to lack of activity. Please reopen if any new developments arise.