jcache is a key-value cache store. It provides own communication protocol over TCP connection. Server supports different storage types, including simple in-memory storage and persistent storage based on key-value file-based store Bolt.
Key may contain only alphabetical symbols (a-z) in any case and numbers.
Supported value types:
- string
- hash (key-value subset)
- list (note: list is not supported by Bolt storage type)
Hash field key limitation is similar to key limitation.
Any key may have TTL specified by seconds. After TTL key will be expired and will be removed from storage by GC. TTL equal to 0 means unlimited TTL.
jcache protocol provides simple human-readable commands and responses format.
Following list of command contains each command description and command/responses format.
Some of command descriptions provide examples in format:
--> example of data sent to server
<-- example of data sent to client
Command returns all keys from store. If storage is empty, then the command returns COUNT 0.
--> KEYS\r\n
<-- COUNT <number_of_keys>\r\n[KEY <key>\r\n...]
Example:
--> KEYS\r\n
<-- COUNT 3\r\nKEY some_key1\r\nKEY some_key2\r\nKEY some_key3\r\n
Command updates key ttl. It works for all value types. It returns error if key doesn't exist.
--> EXPIRE <key> <ttl>\r\n
<-- OK\r\n
Command returns string value by key. It works only for string value type. Command responses VALUE N where N is a length of following value. It returns error if key doesn't exist.
--> GET <key>\r\n
<-- VALUE <value_length>\r\n<value>\r\n
Example:
--> GET some_key\r\n
<-- VALUE 10\r\nsome_value\r\n
Command sets new key-value pair. It works only for string value type. It returns error if key already exists.
--> SET <key> <ttl> <value length>\r\n<value>\r\n
<-- OK\r\n
Example:
--> SET some_key 60 10\r\nsome_value\r\n
<-- OK\r\n
Command updates existing key string value. It works only for string value type. It returns error if key doesn't exist.
--> UPD <key> <value_length>\r\n<value>\r\n
<-- OK\r\n
Command deletes key value. It works for all value types. It returns error if key doesn't exist.
--> DEL <key>\r\n
<-- OK\r\n
Command creates new hash. It returns error if key already exists.
--> HCREATE <key> <ttl>\r\n
<-- OK\r\n
Command returns hash field value. It returns error if key or field doesn't exist or key type is not hash.
--> HGET <key> <field>\r\n
<-- VALUE <value_length>\r\n<value>\r\n
Command sets hash field value. It is allowed to change existing field. If hash doesn't exist yet, it will be created with ttl=0.
--> HSET <key> <field> <value_length>\r\n<value>\r\n
<-- OK\r\n
Command deletes hash field. It returns error if key or field doesn't exist.
--> HDEL <key> <field>\r\n
<-- OK\r\n
Command returns list of all fields in hash. It returns error if key doesn't exist.
--> HKEYS <key>\r\n
<-- COUNT <number_of_fields>\r\n[KEY <field>\r\n...]
Command returns number of fields in hash. It returns error if key doesn't exist.
--> HLEN <key>\r\n
<-- LEN <number_of_fields>\r\n
Command creates new list. It returns error if key already exists.
--> HLIST <key> <ttl>\r\n
<-- OK\r\n
Command adds new value to the ending (right) of the list. If list doesn't exist yet, it will be created with ttl=0.
--> LRPUSH <key> <value_length>\r\n<value>\r\n
<-- OK\r\n
Command adds new value to the beginning (left) of the list. If list doesn't exist yet, it will be created with ttl=0.
--> LLPUSH <key> <value_length>\r\n<value>\r\n
<-- OK\r\n
Command returns and removes value from the ending of the list. It returns error if key doesn't exist or if the list is empty.
--> LRPOP <key>\r\n
<-- VALUE <value_length>\r\n<value>\r\n
Command returns and removes value from the beginning of the list. It returns error if key doesn't exist or if the list is empty.
--> LLPOP <key>\r\n
<-- VALUE <value_length>\r\n<value>\r\n
Command returns number of values in the list. It returns error if key doesn't exist.
--> LLEN <key>\r\n
<-- LEN <number_of_values>\r\n
Command returns sublist of values from and to specified indexes. If specified indexes are out of range it doesn't cause an error. It returns error if key doesn't exist.
--> LRANGE <key> <start> <stop>\r\n
<-- COUNT <number_of_values>\r\n[VALUE <value_length>\r\n<value>\r\n...]
Example:
--> LRANGE some_list 0 2\r\n
<-- COUNT 3\r\nVALUE 10\r\nsome_value\r\nVALUE 13\r\nanother_value\r\nVALUE 0\r\n\r\n
Command authenticate user within the opened connection. If server is started with authentication support, then AUTH command must be first after connection open. If authentication is not passed, then all commands will return error.
--> AUTH <user> <password>\r\n
<-- OK\r\n
Server may return protocol-related errors if it could not parse incoming request. Also, most of commands may return command-related error as a response instead of normal response. In both cases error response format will be:
<-- ERROR <description>\r\n
Examples:
--> NONEXISTINGCOMMAND\r\n
<-- ERROR Unknown command\r\n
--> GET\r\n
<-- ERROR Invalid command format\r\n
All commands related to specific value type return error if client tries to work with key of another type (except of DEL command which is universal).
Example:
--> HCREATE hash 0\r\n
<-- OK\r\n
--> GET hash\r\n
<-- ERROR Key type is not string\r\n
There are 3 implemented types of storages: memory, multi_memory and bolt. You can choose storage type by storage_type run option. All storages have "garbage collector" (GC) to remove expired values from storage. Interval of GC running is defined by storage_gc_interval option.
Memory storage is a simple in-memory storage with limited count of stored keys. Maximum size is defined by storage_memory_size option. Memory storage uses LRU algorithm, so less recent key will be removed in case of adding new key to full storage.
It's the same in-memory storage but separated on several buckets. Distribution by buckets is normal and made by key check sum. Number of buckets is defined by storage_multi_memory_count option.
This storage has underlying Bolt file storage. Path to Bolt file is defined by storage_boltdb_path option. If file doesn't exist it will be created. Important: Bolt storage doesn't support list value type.
If you want server supports authentication, just pass path to .htpasswd file with htpasswd option. If server is running with htpasswd option then it requires AUTH command with valid credentials after connection is open. All other commands will work only after valid authentication.
git clone [email protected]:Barberrrry/jcache.git ./
make
It will install vendor dependencies and build jcache file.
Run unit-tests:
make test
Run benchmarks to see some storages and server performance:
make bench
Just run server with default parameters:
./jcache
Run options:
./jcache --help
Usage of ./jcache:
-htpasswd string
Path to .htpasswd file for authentication. Leave blank to disable authentication.
-listen string
Host and port to listen connection (default ":9999")
-storage_bolt_path string
Path to Bolt file
-storage_gc_interval duration
Storage GC interval (default 1m0s)
-storage_memory_size uint
Max number of stored elements (default 10000)
-storage_multi_memory_count uint
Number of storages inside multi memory storage (default 1)
-storage_type value
Type of storage (memory, multi_memory, bolt) (default memory)
Example:
./jcache -listen=127.0.0.1:9999 -storage_type=bolt -storage_boltdb_path=bold.db -storage_gc_interval=5m
Import client package:
import "github.com/Barberrrry/jcache/client"
Client package support glide, so you can just run glide up if you use glide in your project. Also you may download client dependencies manually:
go get "gopkg.in/fatih/pool.v2"
Example of client usage:
client, clientErr := client.New("127.0.0.1:9999", "admin", "admin", 5*time.Second, 5)
setErr := client.Set("key", "value1", 3600)
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent