Comments (6)
As stated in http://www.apator.com/uploads/files/Produkty/Cieplomierze/elf/i-en-009-2017-elf-13-01.pdf the operating frequency of your heatmeter is 868.95 Mhz - just like devices which i have already tested (see sample2.bin). If in doubts concerning "-f 868.9M" setting, i would recommend to check the radio signal if it is there near to this frequency, for example by using gqrx. You have to expect the heatmeter signal as two "splashes" at the distance of about 50kHz each near to 868.95Mhz. Set the cursor just in between of these two splashes and notice the frequency - you have to use it in the command line.
from rtl-wmbus.
I did not use the standard DVB-T antenna which is typically optimized for 400-600Mhz. I have a small SMA 50 ohms antenna which is connected with an "MCX Jack to SMA RF Cable Adapter" to the DVB-T dongle. Antenna matching is obviously worse ;-), but absolutely sufficent for you purpose.
from rtl-wmbus.
Please update your git copy of the project. I've just removed the "-sse4.2" compiler option from Makefile. This should be sufficient, but i have no orange pi zero to test it out. Write me if still in troubles.
from rtl-wmbus.
Hi
thx for the reply - I have moved forward with the pi - there I had to remove the android section - then it compiled & retunrned the "2" value fro sample2.bin. Great!
Did you actually try it with such devices: mgroup aka elf with wirless mbus
http://www.apator.com/en/offer/water-and-heat-metering/heat-meters/elf-compact-heat-meter
I would like to integrate it with domoticz (https://domoticz.com/) which natively supports the rtl-sdr module.
- which workes fine with the parameter:
-f 433.92e6 -f 868.24e6 -H 60
so I exchanged it with:
-f 868.9M -s 1600000 - 2>/dev/null | build/rtl_wmbus
which again returnd heaps of junk.
ok let me know - any help apreciated!
I keep getting gribbish. should I change the antenna,,,? do fine tuning ...? How? Thx!
from rtl-wmbus.
I have neither experience with "elf with wirless mbus" nor i have used https://domoticz.com . BTW, thanks for sharing the link.
from rtl-wmbus.
ok, so these are my findings so far:
- domoticz still spits out gribbish :( - will adapt the frequency to 868.9(5) & check with gqrx as suggested. thx.
- in parallel I have installed fhme which is definitly more advanced on the wmbus area inc. aes decription etc. and integration for metering.
but (almost!) noone seems to have ever integrated a dvd stick or rflink. How is that even possible?! & What a pitty!! Did you get it to run with fhem?
So I have one system that can display gribbish and another that could decode it but I am missing a pipe between them.... maybe this is even possible but I would have to investigate further in the endless manuals of fhem. what is your suggestion ...?
There are two more things that could help now:
- Try to pipe the rtl-sdr output into fsme as some kind of "DVB-"CUL" (how ...?) my plan A.
- fhem + tefrec + mqtt + mosquito + dvb + rtl-sdr etc...
The only one who really sems to have botherd accessing a dvb stick - und does so with a wrapper called tfrec.
https://github.com/git-developer/fhem-examples/wiki/Temperatur-Feuchte-Sender-mit-tfrec-und-MQTT
=> I alreday have a mqtt broker in my net & that would be overkill I guess for now - so plan B - Skim through the other sdr-uniqhorn in the fhme ecosphere "SDR tool for receiving wireless sensor data (TFA IT+ KlimaLogg Pro)" for clues that might help interate it but there is a linbe that tells me: No:
"Received values must be externaly fed to a database, FHEM, etc!"
https://github.com/baycom/tfrec so: Plan C.
Honestly: would a chat with you. In exchange for a working wbus I would show you all the cool domoticz stuff i did so far :) so let me know what you think about it. u got my email. All for now, BrP
from rtl-wmbus.
Related Issues (20)
- Support Mode N WmBus to allow wmbusmeters project to support Honeywell TPR11 Merlin 169 WmBus HOT 33
- atan2 approximation issue
- Kamstrup FlowIQ 2102 (Multical 21) in 923 MHZ - mode C1 HOT 8
- Caloric 5.5 is not seen HOT 11
- issue with missing telegrams form techem data4 HOT 4
- Package in Debian? HOT 7
- no result with rx_sdr HOT 1
- Please tag releases
- Resource requirements of rtl-wmbus
- Test with IZAR RC 434 I R4 HOT 3
- Honeywell V210 Water Meter 868MHz T1 HOT 8
- Why don't fork on dual mode (S1 and T1/C1 datagrams simultaneously) HOT 5
- RSSI value in dBm HOT 2
- Wrong behaviour on stadout HOT 2
- rtl_wmbus cannot read from rtl_sdr -- how to debug -- or can it use rtl_433 instead ? HOT 3
- Wmbus device , using different frequency and different transmission speed HOT 1
- cannot recover corrupted preamble HOT 5
- wmbus Mode T: some bits look strange HOT 1
- amiplus frames not decoded HOT 6
- build directory
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from rtl-wmbus.